From: Joe Perches <joe@perches.com>
To: Andrew Morton <akpm@linux-foundation.org>, linux-kernel@vger.kernel.org
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
Rob Herring <robh+dt@kernel.org>
Subject: [PATCH] hexdump: Add ability to do endian conversions in print_hex_dump functions
Date: Wed, 9 Dec 2015 13:59:30 -0800 [thread overview]
Message-ID: <bc67748274ffac118e61374200256e1ae17acf19.1449697255.git.joe@perches.com> (raw)
In-Reply-To: <CAL_JsqJ0oftptSxyAcGOnQ3XA9v55B2n=8DiWBcErcLKgfsppg@mail.gmail.com>
There are use cases for dumping buffers with specific endian types
for 2, 4, and 8 byte variables in arrays.
Add an enum for DUMP_TYPE_(LE|BE|CPU) to enable emitting them as such.
Rename groupsize to groupflags in the functions and add documentation
to the kernel-doc to describe the use of the DUMP_TYPE_ enum.
Signed-off-by: Joe Perches <joe@perches.com>
---
include/linux/printk.h | 23 +++++++++++++++--------
lib/hexdump.c | 49 ++++++++++++++++++++++++++++++++++++++-----------
2 files changed, 53 insertions(+), 19 deletions(-)
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 9729565..aac2943 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -424,12 +424,19 @@ enum {
DUMP_PREFIX_ADDRESS,
DUMP_PREFIX_OFFSET
};
+
+enum {
+ DUMP_TYPE_CPU = 0,
+ DUMP_TYPE_LE = BIT(30),
+ DUMP_TYPE_BE = BIT(31)
+};
+
extern int hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
- int groupsize, char *linebuf, size_t linebuflen,
+ int groupflags, char *linebuf, size_t linebuflen,
bool ascii);
#ifdef CONFIG_PRINTK
extern void print_hex_dump(const char *level, const char *prefix_str,
- int prefix_type, int rowsize, int groupsize,
+ int prefix_type, int rowsize, int groupflags,
const void *buf, size_t len, bool ascii);
#if defined(CONFIG_DYNAMIC_DEBUG)
#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
@@ -440,7 +447,7 @@ extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
#endif /* defined(CONFIG_DYNAMIC_DEBUG) */
#else
static inline void print_hex_dump(const char *level, const char *prefix_str,
- int prefix_type, int rowsize, int groupsize,
+ int prefix_type, int rowsize, int groupflags,
const void *buf, size_t len, bool ascii)
{
}
@@ -453,17 +460,17 @@ static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
#if defined(CONFIG_DYNAMIC_DEBUG)
#define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii) \
+ groupflags, buf, len, ascii) \
dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii)
+ groupflags, buf, len, ascii)
#elif defined(DEBUG)
#define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii) \
+ groupflags, buf, len, ascii) \
print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii)
+ groupflags, buf, len, ascii)
#else
static inline void print_hex_dump_debug(const char *prefix_str, int prefix_type,
- int rowsize, int groupsize,
+ int rowsize, int groupflags,
const void *buf, size_t len, bool ascii)
{
}
diff --git a/lib/hexdump.c b/lib/hexdump.c
index 992457b..f44608e 100644
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -80,7 +80,9 @@ EXPORT_SYMBOL(bin2hex);
* @buf: data blob to dump
* @len: number of bytes in the @buf
* @rowsize: number of bytes to print per line; must be 16 or 32
- * @groupsize: number of bytes to print at a time (1, 2, 4, 8; default = 1)
+ * @groupflags: number of bytes to print at a time (1, 2, 4, 8; default = 1)
+ * use a bitwise OR with %DUMP_TYPE_BE or %DUMP_TYPE_LE for endian conversions
+ * of @buf, otherwise %DUMP_TYPE_CPU is used
* @linebuf: where to put the converted data
* @linebuflen: total size of @linebuf, including space for terminating NUL
* @ascii: include ASCII after the hex output
@@ -105,7 +107,7 @@ EXPORT_SYMBOL(bin2hex);
* (excluding the terminating NUL) which would have been written to the final
* string if enough space had been available.
*/
-int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupsize,
+int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupflags,
char *linebuf, size_t linebuflen, bool ascii)
{
const u8 *ptr = buf;
@@ -114,6 +116,7 @@ int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupsize,
int j, lx = 0;
int ascii_column;
int ret;
+ int groupsize = groupflags & ~(DUMP_TYPE_LE | DUMP_TYPE_BE);
if (rowsize != 16 && rowsize != 32)
rowsize = 16;
@@ -138,9 +141,16 @@ int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupsize,
const u64 *ptr8 = buf;
for (j = 0; j < ngroups; j++) {
+ u64 val;
+
+ if (groupflags & DUMP_TYPE_LE)
+ val = get_unaligned_le64(ptr8 + j);
+ else if (groupflags & DUMP_TYPE_BE)
+ val = get_unaligned_be64(ptr8 + j);
+ else
+ val = get_unaligned(ptr8 + j);
ret = snprintf(linebuf + lx, linebuflen - lx,
- "%s%16.16llx", j ? " " : "",
- get_unaligned(ptr8 + j));
+ "%s%16.16llx", j ? " " : "", val);
if (ret >= linebuflen - lx)
goto overflow1;
lx += ret;
@@ -149,9 +159,16 @@ int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupsize,
const u32 *ptr4 = buf;
for (j = 0; j < ngroups; j++) {
+ u32 val;
+
+ if (groupflags & DUMP_TYPE_LE)
+ val = get_unaligned_le32(ptr4 + j);
+ else if (groupflags & DUMP_TYPE_BE)
+ val = get_unaligned_be32(ptr4 + j);
+ else
+ val = get_unaligned(ptr4 + j);
ret = snprintf(linebuf + lx, linebuflen - lx,
- "%s%8.8x", j ? " " : "",
- get_unaligned(ptr4 + j));
+ "%s%8.8x", j ? " " : "", val);
if (ret >= linebuflen - lx)
goto overflow1;
lx += ret;
@@ -160,9 +177,16 @@ int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupsize,
const u16 *ptr2 = buf;
for (j = 0; j < ngroups; j++) {
+ u16 val;
+
+ if (groupflags & DUMP_TYPE_LE)
+ val = get_unaligned_le16(ptr2 + j);
+ else if (groupflags & DUMP_TYPE_BE)
+ val = get_unaligned_be16(ptr2 + j);
+ else
+ val = get_unaligned(ptr2 + j);
ret = snprintf(linebuf + lx, linebuflen - lx,
- "%s%4.4x", j ? " " : "",
- get_unaligned(ptr2 + j));
+ "%s%4.4x", j ? " " : "", val);
if (ret >= linebuflen - lx)
goto overflow1;
lx += ret;
@@ -216,7 +240,10 @@ EXPORT_SYMBOL(hex_dump_to_buffer);
* @prefix_type: controls whether prefix of an offset, address, or none
* is printed (%DUMP_PREFIX_OFFSET, %DUMP_PREFIX_ADDRESS, %DUMP_PREFIX_NONE)
* @rowsize: number of bytes to print per line; must be 16 or 32
- * @groupsize: number of bytes to print at a time (1, 2, 4, 8; default = 1)
+ * @groupflags: number of bytes to print at a time (1, 2, 4, 8; default = 1)
+ * @groupflags: number of bytes to print at a time (1, 2, 4, 8; default = 1)
+ * use a bitwise OR with %DUMP_TYPE_BE or %DUMP_TYPE_LE for endian conversions
+ * of @buf, otherwise %DUMP_TYPE_CPU is used
* @buf: data blob to dump
* @len: number of bytes in the @buf
* @ascii: include ASCII after the hex output
@@ -240,7 +267,7 @@ EXPORT_SYMBOL(hex_dump_to_buffer);
* ffffffff88089af0: 73727170 77767574 7b7a7978 7f7e7d7c pqrstuvwxyz{|}~.
*/
void print_hex_dump(const char *level, const char *prefix_str, int prefix_type,
- int rowsize, int groupsize,
+ int rowsize, int groupflags,
const void *buf, size_t len, bool ascii)
{
const u8 *ptr = buf;
@@ -254,7 +281,7 @@ void print_hex_dump(const char *level, const char *prefix_str, int prefix_type,
linelen = min(remaining, rowsize);
remaining -= rowsize;
- hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
+ hex_dump_to_buffer(ptr + i, linelen, rowsize, groupflags,
linebuf, sizeof(linebuf), ascii);
switch (prefix_type) {
--
2.6.3.368.gf34be46
next prev parent reply other threads:[~2015-12-09 21:59 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-08 16:07 [PATCH v2] of/address: replace printk() with pr_debug() / pr_err() Masahiro Yamada
2015-12-08 16:16 ` Joe Perches
2015-12-08 17:03 ` Joe Perches
2015-12-08 21:28 ` Rob Herring
2015-12-09 0:03 ` Joe Perches
2015-12-09 12:03 ` Andy Shevchenko
2015-12-09 19:28 ` Joe Perches
2015-12-09 20:02 ` Andy Shevchenko
2015-12-09 20:09 ` Joe Perches
2015-12-09 20:17 ` Rasmus Villemoes
2015-12-09 20:36 ` Andy Shevchenko
2015-12-09 20:42 ` Joe Perches
2015-12-09 21:59 ` Joe Perches [this message]
2015-12-09 22:09 ` [PATCH] hexdump: Add ability to do endian conversions in print_hex_dump functions Andrew Morton
2015-12-09 22:16 ` Joe Perches
2015-12-09 22:45 ` Andrew Morton
2015-12-09 23:02 ` Joe Perches
2015-12-09 22:11 ` Andy Shevchenko
2015-12-09 22:22 ` Joe Perches
2015-12-09 23:09 ` Andy Shevchenko
2015-12-09 23:15 ` Joe Perches
2015-12-10 5:55 ` kbuild test robot
2015-12-10 6:20 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bc67748274ffac118e61374200256e1ae17acf19.1449697255.git.joe@perches.com \
--to=joe@perches.com \
--cc=akpm@linux-foundation.org \
--cc=andy.shevchenko@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®