From: Jesper Nilsson <jesper.nilsson@axis.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Mikael Starvik <mikael.starvik@axis.com>,
Jesper Nilsson <jesper.nilsson@axis.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 43/47] Update and improve CRISv32 kernel/traps.c
Date: Mon, 3 Dec 2007 11:12:10 +0100 [thread overview]
Message-ID: <bcb009a14ec15a9c03db519e5a7fb076a509f504.1196848533.git.jesper.nilsson@axis.com> (raw)
In-Reply-To: <ca13018bb45763422de40e6109171637091a312e.1196848533.git.jesper.nilsson@axis.com>
- Remove watchdog handling, handled elsewhere.
- Shorten include paths to machine dependent header files.
- Remove raw_printk hack, we now use oops_in_progress instead.
- Add handling of BUG for exception handlers (break 14).
- Formatting and whitespace changes.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
arch/cris/arch-v32/kernel/traps.c | 192 ++++++++++++++++++++++---------------
1 files changed, 114 insertions(+), 78 deletions(-)
diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c
index 17fd3db..9003e38 100644
--- a/arch/cris/arch-v32/kernel/traps.c
+++ b/arch/cris/arch-v32/kernel/traps.c
@@ -1,50 +1,45 @@
/*
- * Copyright (C) 2003, Axis Communications AB.
+ * Copyright (C) 2003-2006, Axis Communications AB.
*/
#include <linux/ptrace.h>
+#include <linux/module.h>
#include <asm/uaccess.h>
-
-#include <asm/arch/hwregs/supp_reg.h>
-
-extern void reset_watchdog(void);
-extern void stop_watchdog(void);
-
-extern int raw_printk(const char *fmt, ...);
+#include <hwregs/supp_reg.h>
+#include <hwregs/intr_vect_defs.h>
+#include <asm/irq.h>
void
show_registers(struct pt_regs *regs)
{
/*
* It's possible to use either the USP register or current->thread.usp.
- * USP might not correspond to the current proccess for all cases this
+ * USP might not correspond to the current process for all cases this
* function is called, and current->thread.usp isn't up to date for the
- * current proccess. Experience shows that using USP is the way to go.
+ * current process. Experience shows that using USP is the way to go.
*/
- unsigned long usp;
+ unsigned long usp = rdusp();
unsigned long d_mmu_cause;
unsigned long i_mmu_cause;
- usp = rdusp();
+ printk("CPU: %d\n", smp_processor_id());
- raw_printk("CPU: %d\n", smp_processor_id());
+ printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
+ regs->erp, regs->srp, regs->ccs, usp, regs->mof);
- raw_printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
- regs->erp, regs->srp, regs->ccs, usp, regs->mof);
+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
+ regs->r0, regs->r1, regs->r2, regs->r3);
- raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
- regs->r0, regs->r1, regs->r2, regs->r3);
+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
+ regs->r4, regs->r5, regs->r6, regs->r7);
- raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
- regs->r4, regs->r5, regs->r6, regs->r7);
+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
+ regs->r8, regs->r9, regs->r10, regs->r11);
- raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
- regs->r8, regs->r9, regs->r10, regs->r11);
+ printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
+ regs->r12, regs->r13, regs->orig_r10, regs->acr);
- raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
- regs->r12, regs->r13, regs->orig_r10, regs->acr);
-
- raw_printk("sp: %08lx\n", regs);
+ printk(" sp: %08lx\n", (unsigned long)regs);
SUPP_BANK_SEL(BANK_IM);
SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause);
@@ -52,18 +47,20 @@ show_registers(struct pt_regs *regs)
SUPP_BANK_SEL(BANK_DM);
SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause);
- raw_printk(" Data MMU Cause: %08lx\n", d_mmu_cause);
- raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
+ printk(" Data MMU Cause: %08lx\n", d_mmu_cause);
+ printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
- raw_printk("Process %s (pid: %d, stackpage: %08lx)\n",
- current->comm, current->pid, (unsigned long) current);
+ printk("Process %s (pid: %d, stackpage=%08lx)\n",
+ current->comm, current->pid, (unsigned long)current);
- /* Show additional info if in kernel-mode. */
+ /*
+ * When in-kernel, we also print out the stack and code at the
+ * time of the fault..
+ */
if (!user_mode(regs)) {
int i;
- unsigned char c;
- show_stack(NULL, (unsigned long *) usp);
+ show_stack(NULL, (unsigned long *)usp);
/*
* If the previous stack-dump wasn't a kernel one, dump the
@@ -72,7 +69,7 @@ show_registers(struct pt_regs *regs)
if (usp != 0)
show_stack(NULL, NULL);
- raw_printk("\nCode: ");
+ printk("\nCode: ");
if (regs->erp < PAGE_OFFSET)
goto bad_value;
@@ -84,76 +81,115 @@ show_registers(struct pt_regs *regs)
* instruction decoding should be in sync at the interesting
* point, but small enough to fit on a row. The regs->erp
* location is pointed out in a ksymoops-friendly way by
- * wrapping the byte for that address in parenthesis.
+ * wrapping the byte for that address in parenthesises.
*/
for (i = -12; i < 12; i++) {
- if (__get_user(c, &((unsigned char *) regs->erp)[i])) {
+ unsigned char c;
+
+ if (__get_user(c, &((unsigned char *)regs->erp)[i])) {
bad_value:
- raw_printk(" Bad IP value.");
+ printk(" Bad IP value.");
break;
}
if (i == 0)
- raw_printk("(%02x) ", c);
+ printk("(%02x) ", c);
else
- raw_printk("%02x ", c);
+ printk("%02x ", c);
}
-
- raw_printk("\n");
+ printk("\n");
}
}
-/*
- * This gets called from entry.S when the watchdog has bitten. Show something
- * similar to an Oops dump, and if the kernel is configured to be a nice doggy;
- * halt instead of reboot.
- */
void
-watchdog_bite_hook(struct pt_regs *regs)
+arch_enable_nmi(void)
{
-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
- local_irq_disable();
- stop_watchdog();
- show_registers(regs);
+ unsigned long flags;
- while (1)
- ; /* Do nothing. */
-#else
- show_registers(regs);
-#endif
+ local_save_flags(flags);
+ flags |= (1 << 30); /* NMI M flag is at bit 30 */
+ local_irq_restore(flags);
}
-/* This is normally the Oops function. */
-void
-die_if_kernel(const char *str, struct pt_regs *regs, long err)
+extern void (*nmi_handler)(struct pt_regs *);
+void handle_nmi(struct pt_regs *regs)
{
- if (user_mode(regs))
- return;
+#ifdef CONFIG_ETRAXFS
+ reg_intr_vect_r_nmi r;
+#endif
-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
- /*
- * This printout might take too long and could trigger
- * the watchdog normally. If NICE_DOGGY is set, simply
- * stop the watchdog during the printout.
- */
- stop_watchdog();
+ if (nmi_handler)
+ nmi_handler(regs);
+
+#ifdef CONFIG_ETRAXFS
+ /* Wait until nmi is no longer active. */
+ do {
+ r = REG_RD(intr_vect, regi_irq, r_nmi);
+ } while (r.ext == regk_intr_vect_on);
#endif
+}
- raw_printk("%s: %04lx\n", str, err & 0xffff);
- show_registers(regs);
+#ifdef CONFIG_BUG
+extern void die_if_kernel(const char *str, struct pt_regs *regs, long err);
-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
- reset_watchdog();
-#endif
+/* Copy of the regs at BUG() time. */
+struct pt_regs BUG_regs;
- do_exit(SIGSEGV);
+void do_BUG(char *file, unsigned int line)
+{
+ printk("kernel BUG at %s:%d!\n", file, line);
+ die_if_kernel("Oops", &BUG_regs, 0);
}
+EXPORT_SYMBOL(do_BUG);
-void arch_enable_nmi(void)
+void fixup_BUG(struct pt_regs *regs)
{
- unsigned long flags;
- local_save_flags(flags);
- flags |= (1<<30); /* NMI M flag is at bit 30 */
- local_irq_restore(flags);
+ BUG_regs = *regs;
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+ /*
+ * Fixup the BUG arguments through exception handlers.
+ */
+ {
+ const struct exception_table_entry *fixup;
+
+ /*
+ * ERP points at the "break 14" + 2, compensate for the 2
+ * bytes.
+ */
+ fixup = search_exception_tables(instruction_pointer(regs) - 2);
+ if (fixup) {
+ /* Adjust the instruction pointer in the stackframe. */
+ instruction_pointer(regs) = fixup->fixup;
+ arch_fixup(regs);
+ }
+ }
+#else
+ /* Dont try to lookup the filename + line, just dump regs. */
+ do_BUG("unknown", 0);
+#endif
}
+
+/*
+ * Break 14 handler. Save regs and jump into the fixup_BUG.
+ */
+__asm__ ( ".text\n\t"
+ ".global breakh_BUG\n\t"
+ "breakh_BUG:\n\t"
+ SAVE_ALL
+ KGDB_FIXUP
+ "move.d $sp, $r10\n\t"
+ "jsr fixup_BUG\n\t"
+ "nop\n\t"
+ "jump ret_from_intr\n\t"
+ "nop\n\t");
+
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+void
+handle_BUG(struct pt_regs *regs)
+{
+}
+#endif
+#endif
--
1.5.3.6.970.gd25430
next prev parent reply other threads:[~2007-12-06 12:56 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-29 16:02 [PATCH 00/47] CRIS patches for CRISv32 EtraxFS and ARTPEC-3 Jesper Nilsson
2007-11-29 16:02 ` [PATCH 01/47] Rearrange Kconfigs for CRIS v10 and v32 to allow compilation without warnings Jesper Nilsson
2007-11-29 16:03 ` [PATCH 02/47] Add new driver files for Artpec-3 Jesper Nilsson
2007-12-12 11:09 ` Andrew Morton
2007-11-29 16:05 ` [PATCH 03/47] Add new driver files for Etrax-FS Jesper Nilsson
2007-11-29 16:11 ` [PATCH 04/47] Add new machine dependent files for Etrax-FS and Artpec-3 Jesper Nilsson
2007-11-29 16:23 ` [PATCH 06/47] Add serial driver for CRISv32 Jesper Nilsson
2007-12-12 11:14 ` Andrew Morton
2007-11-29 16:24 ` [PATCH 07/47] Add L2 cache initialization code Jesper Nilsson
2007-11-29 16:26 ` [PATCH 08/47] Add SECOND_WORD_SYNC, used in CRISv32 version of sync_serial Jesper Nilsson
2007-11-29 16:30 ` [PATCH 09/47] Update CRISv32 synchronous serial driver Jesper Nilsson
2007-11-29 16:58 ` [PATCH 10/47] Merge axisflashmap.h with Axis internal changes Jesper Nilsson
2007-11-29 17:11 ` [PATCH 11/47] Minor fixes to CRISv32 irq defines Jesper Nilsson
2007-11-29 17:19 ` [PATCH 12/47] Remove unnecessary CVS log from cris/mm/init.c Jesper Nilsson
2007-11-30 9:11 ` [PATCH 13/47] Add prototypes for cache flushing on CRISv32 Jesper Nilsson
2007-11-30 9:12 ` [PATCH 14/47] Add headers for CRISv32 chips EtraxFS and Artpec-3 Jesper Nilsson
2007-11-30 12:59 ` [PATCH 15/47] Minor fixes to mm/fault.c for CRIS Jesper Nilsson
2007-12-12 11:17 ` Andrew Morton
2007-12-12 13:36 ` Jesper Nilsson
2007-11-30 13:11 ` [PATCH 16/47] Minor CRIS generic kernel/traps.c changes Jesper Nilsson
2007-11-30 13:14 ` [PATCH 17/47] Add handling of PTRACE_DETATCH for CRISv32. Whitespace and formatting changes to avoid checkpatch errors Jesper Nilsson
2007-11-30 14:40 ` [PATCH 18/47] Remove define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY from CRIS Jesper Nilsson
2007-11-30 14:44 ` [PATCH 19/47] Update CRISv32 entry.S to working order Jesper Nilsson
2007-11-30 14:47 ` [PATCH 20/47] Fixup CRISv32 kernel Makefile Jesper Nilsson
2007-11-30 14:54 ` [PATCH 21/47] New version of CRISv32 I2C driver Jesper Nilsson
2007-12-12 11:19 ` Andrew Morton
2007-11-30 15:01 ` [PATCH 22/47] Update and improve axisflashmap for CRISv32 Jesper Nilsson
2007-11-30 15:07 ` [PATCH 23/47] Update CRIS main Kbuild makefile Jesper Nilsson
2007-11-30 15:08 ` [PATCH 24/47] Update CRISv10 boot " Jesper Nilsson
2007-11-30 15:10 ` [PATCH 25/47] Update CRISv10 boot compressed " Jesper Nilsson
2007-11-30 15:11 ` [PATCH 26/47] Update CRISv10 rescue " Jesper Nilsson
2007-11-30 15:13 ` [PATCH 27/47] Update CRISv10 rescue head.s Jesper Nilsson
2007-12-06 13:58 ` David Miller
2007-12-07 0:46 ` Jesper Nilsson
2007-11-30 15:17 ` [PATCH 28/47] Update and improve CRISv10 axisflashmap.c Jesper Nilsson
2007-11-30 15:22 ` [PATCH 29/47] Update CRISv32 traps.c Jesper Nilsson
2007-12-12 11:21 ` Andrew Morton
2007-11-30 15:24 ` [PATCH 30/47] Update CRISv32 boot Kbuild makefile Jesper Nilsson
2007-11-30 15:25 ` [PATCH 31/47] Update CRISv32 boot compressed " Jesper Nilsson
2007-11-30 15:28 ` [PATCH 32/47] Update CRISv32 boot rescue " Jesper Nilsson
2007-11-30 15:30 ` [PATCH 33/47] Remove CRISv32 common gpio and nandflash, add mach-fs and mach-a3 as subdirs Jesper Nilsson
2007-11-30 15:40 ` [PATCH 34/47] Update CRISv32 compressed head.S Jesper Nilsson
2007-11-30 16:16 ` [PATCH 35/47] Update CRISv32 boot/compressed/misc.c Jesper Nilsson
2007-11-30 16:20 ` [PATCH 36/47] Update CRISv32 boot/rescue/head.S code Jesper Nilsson
2007-11-30 16:26 ` [PATCH 37/47] Update CRISv32 debugport Jesper Nilsson
2007-11-30 16:28 ` [PATCH 38/47] Include path fix for CRISv32 timex.h Jesper Nilsson
2007-11-30 16:46 ` [PATCH 39/47] Update and improve CRISv32 fasttimer.c Jesper Nilsson
2007-12-12 11:23 ` Andrew Morton
2007-11-30 16:54 ` [PATCH 40/47] Update CRISv32 kernel/head.S Jesper Nilsson
2007-11-30 17:09 ` [PATCH 41/47] Update and simplify CRISv32 kernel/irq.c Jesper Nilsson
2007-12-03 9:54 ` [PATCH 42/47] Minor updates to CRISv32 kernel/process.c Jesper Nilsson
2007-12-12 11:24 ` Andrew Morton
2007-12-03 10:12 ` Jesper Nilsson [this message]
2007-12-03 10:16 ` [PATCH 44/47] Minor fixes for CRISv32 io.h Jesper Nilsson
2007-12-12 11:29 ` Andrew Morton
2007-12-12 17:04 ` Jesper Nilsson
2007-12-03 10:37 ` [PATCH 45/47] New default config for CRISv10 Jesper Nilsson
2007-12-04 16:25 ` [PATCH 46/47] Update and improve CRISv32 kernel/time.c Jesper Nilsson
2007-12-12 11:33 ` Andrew Morton
2007-12-04 16:40 ` [PATCH 47/47] Add new defconfigs for Artpec-3 and EtraxFS, both CRISv32 Jesper Nilsson
2007-12-12 10:52 ` [PATCH 00/47] CRIS patches for CRISv32 EtraxFS and ARTPEC-3 Andrew Morton
2007-12-12 13:28 ` Jesper Nilsson
2007-12-12 13:28 ` Adrian Bunk
2007-12-12 13:46 ` Jesper Nilsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bcb009a14ec15a9c03db519e5a7fb076a509f504.1196848533.git.jesper.nilsson@axis.com \
--to=jesper.nilsson@axis.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikael.starvik@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®