From: Ping-Ke Shih <pkshih@realtek.com>
To: "Guilherme G. Piccoli" <gpiccoli@igalia.com>,
<pkshih@realtek.com>, <linux-wireless@vger.kernel.org>
Cc: <kvalo@kernel.org>, <linux-kernel@vger.kernel.org>,
<kernel@gpiccoli.net>, <kernel-dev@igalia.com>,
<rtl8821cerfe2@gmail.com>,
"Guilherme G. Piccoli" <gpiccoli@igalia.com>,
<stable@vger.kernel.org>,
<syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com>
Subject: Re: [PATCH V4] wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failures
Date: Wed, 6 Nov 2024 14:34:32 +0800 [thread overview]
Message-ID: <bcd236f2-ba8b-4515-8dca-b4b803ee91d2@RTEXMBS04.realtek.com.tw> (raw)
In-Reply-To: <20241101193412.1390391-1-gpiccoli@igalia.com>
"Guilherme G. Piccoli" <gpiccoli@igalia.com> wrote:
> Syzkaller reported a hung task with uevent_show() on stack trace. That
> specific issue was addressed by another commit [0], but even with that
> fix applied (for example, running v6.12-rc5) we face another type of hung
> task that comes from the same reproducer [1]. By investigating that, we
> could narrow it to the following path:
>
> (a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and
> dummy_hcd infrastructure.
>
> (b) During the probe of rtl8192cu, the driver ends-up performing an efuse
> read procedure (which is related to EEPROM load IIUC), and here lies the
> issue: the function read_efuse() calls read_efuse_byte() many times, as
> loop iterations depending on the efuse size (in our example, 512 in total).
>
> This procedure for reading efuse bytes relies in a loop that performs an
> I/O read up to *10k* times in case of failures. We measured the time of
> the loop inside read_efuse_byte() alone, and in this reproducer (which
> involves the dummy_hcd emulation layer), it takes 15 seconds each. As a
> consequence, we have the driver stuck in its probe routine for big time,
> exposing a stack trace like below if we attempt to reboot the system, for
> example:
>
> task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000
> Workqueue: usb_hub_wq hub_event
> Call Trace:
> __schedule+0xe22/0xeb6
> schedule_timeout+0xe7/0x132
> __wait_for_common+0xb5/0x12e
> usb_start_wait_urb+0xc5/0x1ef
> ? usb_alloc_urb+0x95/0xa4
> usb_control_msg+0xff/0x184
> _usbctrl_vendorreq_sync+0xa0/0x161
> _usb_read_sync+0xb3/0xc5
> read_efuse_byte+0x13c/0x146
> read_efuse+0x351/0x5f0
> efuse_read_all_map+0x42/0x52
> rtl_efuse_shadow_map_update+0x60/0xef
> rtl_get_hwinfo+0x5d/0x1c2
> rtl92cu_read_eeprom_info+0x10a/0x8d5
> ? rtl92c_read_chip_version+0x14f/0x17e
> rtl_usb_probe+0x323/0x851
> usb_probe_interface+0x278/0x34b
> really_probe+0x202/0x4a4
> __driver_probe_device+0x166/0x1b2
> driver_probe_device+0x2f/0xd8
> [...]
>
> We propose hereby to drastically reduce the attempts of doing the I/O
> reads in case of failures, restricted to USB devices (given that
> they're inherently slower than PCIe ones). By retrying up to 10 times
> (instead of 10000), we got reponsiveness in the reproducer, while seems
> reasonable to believe that there's no sane USB device implementation in
> the field requiring this amount of retries at every I/O read in order
> to properly work. Based on that assumption, it'd be good to have it
> backported to stable but maybe not since driver implementation (the 10k
> number comes from day 0), perhaps up to 6.x series makes sense.
>
> [0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
>
> [1] A note about that: this syzkaller report presents multiple reproducers
> that differs by the type of emulated USB device. For this specific case,
> check the entry from 2024/08/08 06:23 in the list of crashes; the C repro
> is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000.
>
> Cc: stable@vger.kernel.org # v6.1+
> Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com
> Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
1 patch(es) applied to rtw-next branch of rtw.git, thanks.
5c1b54456300 wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failures
---
https://github.com/pkshih/rtw.git
prev parent reply other threads:[~2024-11-06 6:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-01 19:30 Guilherme G. Piccoli
2024-11-06 6:34 ` Ping-Ke Shih [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bcd236f2-ba8b-4515-8dca-b4b803ee91d2@RTEXMBS04.realtek.com.tw \
--to=pkshih@realtek.com \
--cc=gpiccoli@igalia.com \
--cc=kernel-dev@igalia.com \
--cc=kernel@gpiccoli.net \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=rtl8821cerfe2@gmail.com \
--cc=stable@vger.kernel.org \
--cc=syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®