From: Sinan Kaya <okaya@codeaurora.org>
To: poza@codeaurora.org
Cc: Lukas Wunner <lukas@wunner.de>,
linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Bjorn Helgaas <bhelgaas@google.com>,
Keith Busch <keith.busch@intel.com>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH V5 3/3] PCI: Mask and unmask hotplug interrupts during reset
Date: Tue, 3 Jul 2018 09:31:24 -0400 [thread overview]
Message-ID: <bd04c9d1-6dfe-3071-69f9-beb0d649b6c0@codeaurora.org> (raw)
In-Reply-To: <2640af5e-f00f-d814-425d-78ac57714f6d@codeaurora.org>
On 7/3/2018 9:25 AM, Sinan Kaya wrote:
>> what if we only have conditional enumeration ? (leaving removing devices followed by SBR as is) ?
>>
Sorry, I think I didn't quite get your question.
Are you asking about the enumeration following link up while keeping the
current code as is?
Issue is observing hotplug link down event in the middle of AER recovery as in
my previous reply.
If we mask hotplug interrupts before secondary bus reset via my patch,
then hotplug driver will not observe both link up and link down interrupts.
If we don't mask hotplug interrupts, we have a race condition.
I hope I answered your question.
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2018-07-03 13:31 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1530571967-19099-1-git-send-email-okaya@codeaurora.org>
2018-07-02 22:52 ` [PATCH V5 1/3] PCI: pciehp: implement mask and unmask interrupt functions Sinan Kaya
2018-07-02 22:52 ` [PATCH V5 2/3] PCI: pciehp: reuse pciehp_mask/unmask_irq() in reset_slot() Sinan Kaya
2018-07-02 22:52 ` [PATCH V5 3/3] PCI: Mask and unmask hotplug interrupts during reset Sinan Kaya
2018-07-03 8:34 ` Lukas Wunner
2018-07-03 10:52 ` poza
2018-07-03 12:04 ` okaya
2018-07-03 11:30 ` okaya
2018-07-03 13:11 ` poza
2018-07-03 13:25 ` Sinan Kaya
2018-07-03 13:31 ` Sinan Kaya [this message]
2018-07-03 13:59 ` Lukas Wunner
2018-07-03 14:10 ` poza
2018-07-03 14:17 ` Lukas Wunner
2018-07-03 15:34 ` Sinan Kaya
2018-07-29 12:32 ` Lukas Wunner
2018-07-03 14:12 ` Lukas Wunner
2018-07-03 14:29 ` poza
2018-07-29 12:19 ` Lukas Wunner
2018-07-03 14:34 ` Lukas Wunner
2018-07-03 15:12 ` poza
2018-07-03 15:49 ` Sinan Kaya
2018-07-03 15:43 ` Sinan Kaya
2018-07-08 17:14 ` Lukas Wunner
2018-07-09 14:48 ` Sinan Kaya
2018-07-09 16:00 ` Lukas Wunner
2018-07-10 18:30 ` Sinan Kaya
2018-07-20 20:01 ` Bjorn Helgaas
2018-07-21 2:58 ` Sinan Kaya
2018-07-21 6:07 ` Sinan Kaya
2018-07-25 8:29 ` poza
2018-07-29 18:02 ` Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bd04c9d1-6dfe-3071-69f9-beb0d649b6c0@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=bhelgaas@google.com \
--cc=keith.busch@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=poza@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®