From: "yukuai (C)" <yukuai3@huawei.com>
To: Ming Lei <ming.lei@redhat.com>
Cc: <axboe@kernel.dk>, <tj@kernel.org>, <linux-block@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <cgroups@vger.kernel.org>,
<yi.zhang@huawei.com>
Subject: Re: [PATCH 6/6] rq-qos: fix uaf in rq_qos_done_io()
Date: Fri, 24 Sep 2021 16:19:40 +0800 [thread overview]
Message-ID: <bd4b9f4e-f0e6-907f-90d9-d49ae0f1cbad@huawei.com> (raw)
In-Reply-To: <YU0utuB17kA+wcON@T590>
On 2021/09/24 9:49, Ming Lei wrote:
> On Fri, Sep 24, 2021 at 09:23:42AM +0800, yukuai (C) wrote:
>> On 2021/09/24 8:41, Ming Lei wrote:
>>> On Thu, Sep 23, 2021 at 09:46:31PM +0800, Yu Kuai wrote:
>>>> our test report a uaf:
>>>>
>>>> [ 142.925504] ==================================================================
>>>> [ 142.929084] BUG: KASAN: use-after-free in __rq_qos_done_bio+0x57/0x90
>>>> [ 142.931131] Read of size 8 at addr ffff88810306d858 by task blkdiscard/858
>>>> [ 142.933289]
>>>> [ 142.933798] CPU: 1 PID: 858 Comm: blkdiscard Not tainted 5.15.0-rc1-00004-g18bc2dec41ab-d4
>>>> [ 142.936580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364
>>>> [ 142.939318] Call Trace:
>>>> [ 142.939662] ? dump_stack_lvl+0x73/0x9f
>>>> [ 142.940197] ? print_address_description.constprop.0+0x2f/0x250
>>>> [ 142.941004] ? __rq_qos_done_bio+0x57/0x90
>>>> [ 142.941564] ? __rq_qos_done_bio+0x57/0x90
>>>> [ 142.942132] ? kasan_report.cold+0x81/0x165
>>>> [ 142.942710] ? __rq_qos_done_bio+0x57/0x90
>>>> [ 142.943282] ? __asan_load8+0x74/0x110
>>>> [ 142.943798] ? __rq_qos_done_bio+0x57/0x90
>>>> [ 142.944365] ? bio_endio+0x142/0x430
>>>> [ 142.944864] ? submit_bio_checks+0x178/0xef0
>>>> [ 142.945456] ? trace_event_raw_event_block_rq_requeue+0x300/0x300
>>>> [ 142.946283] ? mempool_alloc+0xe9/0x2f0
>>>> [ 142.946812] ? remove_element+0x130/0x130
>>>> [ 142.947371] ? init_timer_key+0x83/0x1b0
>>>> [ 142.947917] ? submit_bio_noacct+0x86/0x9c0
>>>> [ 142.948496] ? blk_queue_enter+0x6d0/0x6d0
>>>> [ 142.949066] ? bio_alloc_bioset+0x1b2/0x3a0
>>>> [ 142.949649] ? __rcu_read_unlock+0x45/0x370
>>>> [ 142.950227] ? bvec_alloc+0x120/0x120
>>>> [ 142.950732] ? submit_bio+0x60/0x230
>>>> [ 142.951230] ? blk_next_bio+0x4f/0x70
>>>> [ 142.951740] ? __blkdev_issue_discard+0x257/0x520
>>>> [ 142.952387] ? __blkdev_issue_write_zeroes+0x270/0x270
>>>> [ 142.953089] ? bd_abort_claiming+0x70/0x70
>>>> [ 142.953652] ? __kasan_check_write+0x20/0x30
>>>> [ 142.954236] ? _raw_spin_lock+0xaf/0x130
>>>> [ 142.954769] ? _raw_read_lock_bh+0xa0/0xa0
>>>> [ 142.955328] ? __get_locked_pte+0x1b3/0x310
>>>> [ 142.955897] ? _raw_spin_unlock+0x3b/0x80
>>>> [ 142.956444] ? blkdev_issue_discard+0xd3/0x1a0
>>>> [ 142.957051] ? blkdev_issue_write_same+0x540/0x540
>>>> [ 142.957708] ? _raw_spin_lock+0xaf/0x130
>>>> [ 142.958244] ? bd_abort_claiming+0x70/0x70
>>>> [ 142.958805] ? wake_up_bit+0x46/0x50
>>>> [ 142.959302] ? preempt_count_sub+0x14/0x160
>>>> [ 142.959877] ? _raw_spin_unlock+0x3b/0x80
>>>> [ 142.960428] ? bd_abort_claiming+0x65/0x70
>>>> [ 142.960993] ? blk_ioctl_discard+0x1bd/0x240
>>>> [ 142.961582] ? blkdev_bszset+0x1c0/0x1c0
>>>> [ 142.962118] ? special_mapping_fault+0x6f/0x200
>>>> [ 142.962743] ? __do_fault+0x80/0x410
>>>> [ 142.963241] ? blkdev_common_ioctl+0x6c9/0x1190
>>>> [ 142.963877] ? ioctl_file_clone+0x110/0x110
>>>> [ 142.964457] ? blk_ioctl_discard+0x240/0x240
>>>> [ 142.965038] ? copy_page_range+0x2b60/0x2b60
>>>> [ 142.965623] ? vfs_getattr_nosec+0x177/0x190
>>>> [ 142.966214] ? __ia32_compat_sys_newfstat+0x40/0x40
>>>> [ 142.966885] ? blkdev_ioctl+0x180/0x4b0
>>>> [ 142.967409] ? blkdev_common_ioctl+0x1190/0x1190
>>>> [ 142.968033] ? handle_mm_fault+0x3c2/0x660
>>>> [ 142.968590] ? __kasan_check_write+0x20/0x30
>>>> [ 142.969172] ? block_ioctl+0x7d/0xa0
>>>> [ 142.969666] ? __x64_sys_ioctl+0xd5/0x150
>>>> [ 142.970224] ? do_syscall_64+0x35/0x80
>>>> [ 142.970733] ? entry_SYSCALL_64_after_hwframe+0x44/0xae
>>>> [ 142.971441]
>>>> [ 142.971653] Allocated by task 283:
>>>> [ 142.972117] kasan_save_stack+0x23/0x60
>>>> [ 142.972637] set_alloc_info+0x46/0x70
>>>> [ 142.973136] __kasan_kmalloc+0x8d/0xd0
>>>> [ 142.973639] kmem_cache_alloc_trace+0x3e7/0x820
>>>> [ 142.974254] wbt_init+0x40/0x430
>>>> [ 142.974694] wbt_enable_default+0xbb/0x100
>>>> [ 142.975248] blk_register_queue+0x216/0x3e0
>>>> [ 142.975812] device_add_disk+0x4ac/0x880
>>>> [ 142.976358] sd_probe+0x690/0x910
>>>> [ 142.976809] really_probe+0x5c3/0x800
>>>> [ 142.977306] __driver_probe_device+0x233/0x330
>>>> [ 142.977907] driver_probe_device+0x69/0x140
>>>> [ 142.978466] __device_attach_driver+0x125/0x210
>>>> [ 142.979081] bus_for_each_drv+0x10e/0x1b0
>>>> [ 142.979615] __device_attach_async_helper+0x175/0x230
>>>> [ 142.980302] async_run_entry_fn+0x7b/0x310
>>>> [ 142.980859] process_one_work+0x46a/0xa80
>>>> [ 142.981400] worker_thread+0x33d/0x8d0
>>>> [ 142.981917] kthread+0x282/0x300
>>>> [ 142.982363] ret_from_fork+0x1f/0x30
>>>> [ 142.982862]
>>>> [ 142.983077] Freed by task 863:
>>>> [ 142.983501] kasan_save_stack+0x23/0x60
>>>> [ 142.984029] kasan_set_track+0x24/0x40
>>>> [ 142.984547] kasan_set_free_info+0x30/0x60
>>>> [ 142.985115] __kasan_slab_free+0x137/0x210
>>>> [ 142.985678] kfree+0x10b/0x570
>>>> [ 142.986106] wbt_exit+0x68/0x80
>>>> [ 142.986535] rq_qos_exit+0x5f/0x80
>>>> [ 142.987002] blk_cleanup_queue+0xdb/0x250
>>>> [ 142.987546] __scsi_remove_device+0xb1/0x2e0
>>>> [ 142.988131] scsi_remove_device+0x38/0x60
>>>> [ 142.988676] sdev_store_delete+0x73/0x100
>>>> [ 142.989230] dev_attr_store+0x40/0x70
>>>> [ 142.989730] sysfs_kf_write+0x89/0xc0
>>>> [ 142.990233] kernfs_fop_write_iter+0x21d/0x340
>>>> [ 142.990839] new_sync_write+0x27e/0x3a0
>>>> [ 142.991362] vfs_write+0x46e/0x630
>>>> [ 142.991834] ksys_write+0xcd/0x1e0
>>>> [ 142.992300] __x64_sys_write+0x46/0x60
>>>> [ 142.992814] do_syscall_64+0x35/0x80
>>>> [ 142.993311] entry_SYSCALL_64_after_hwframe+0x44/0xae
>>>> [ 142.994213] The buggy address belongs to the object at ffff88810306d800
>>>> [ 142.994213] which belongs to the cache kmalloc-256 of size 256
>>>> [ 142.995889] The buggy address is located 88 bytes inside of
>>>> [ 142.995889] 256-byte region [ffff88810306d800, ffff88810306d900)
>>>> [ 142.997448] The buggy address belongs to the page:
>>>> [ 142.998102] page:0000000069471149 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc
>>>> [ 142.999372] head:0000000069471149 order:2 compound_mapcount:0 compound_pincount:0
>>>> [ 143.000375] flags: 0x2fffff80010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
>>>> [ 143.001403] raw: 002fffff80010200 0000000000000000 0000000100000001 ffff88810004cb40
>>>> [ 143.002455] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
>>>> [ 143.003477] page dumped because: kasan: bad access detected
>>>> [ 143.004222]
>>>> [ 143.004433] Memory state around the buggy address:
>>>> [ 143.005077] ffff88810306d700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>>>> [ 143.006040] ffff88810306d780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>>>> [ 143.007012] >ffff88810306d800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>>>> [ 143.007981] ^
>>>> [ 143.008795] ffff88810306d880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>>>> [ 143.009764] ffff88810306d900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>>>> [ 143.010731] ==================================================================
>>>>
>>>> This is because 'q_usage_counter' will not hold when bio_endio() is
>>>> called from error path, thus bio_endio() can concurrent with
>>>> blk_cleanup_queue():
>>>
>>> What is the exact error path? We actually grabs one ref of q_usage_counter
>>> during submitting bio, so the issue should have been fixed by not
>>> releasing the refcount early in the error path? Or the refcnt isn't grabbed
>>> yet when handling the error?
>>>
>>
>> Hi,
>>
>> We found at least two places:
>>
>> The first is error path from submit_bio_checks(), and we succeed to
>> construct repoducer here.
>>
>> The second is from bio_queue_enter(), bio_endio() will be called if
>> blk_queue_enter() failed.
>
> OK, both should be addressed by the following simple patch:
>
>
> diff --git a/block/bio.c b/block/bio.c
> index 5df3dd282e40..a6fb6a0b4295 100644
> --- a/block/bio.c
> +++ b/block/bio.c
> @@ -1466,7 +1466,7 @@ void bio_endio(struct bio *bio)
> if (!bio_integrity_endio(bio))
> return;
>
> - if (bio->bi_bdev)
> + if (bio->bi_bdev && bio_flagged(bio, BIO_TRACKED))
> rq_qos_done_bio(bio->bi_bdev->bd_disk->queue, bio);
>
> if (bio->bi_bdev && bio_flagged(bio, BIO_TRACE_COMPLETION)) {
>
Hi,
This patch looks good to me
Thanks,
Kuai
prev parent reply other threads:[~2021-09-24 8:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 13:46 [PATCH 0/6] " Yu Kuai
2021-09-23 13:46 ` [PATCH 1/6] rq-qos: introduce rq_qos_free() Yu Kuai
2021-09-23 13:46 ` [PATCH 2/6] blk-wbt: introduce wbt_free() Yu Kuai
2021-09-23 13:46 ` [PATCH 3/6] io-cost: introduce ioc_rqos_free() Yu Kuai
2021-09-23 13:46 ` [PATCH 4/6] blk-iolatency: splict blkcg_iolatency_free() from blkcg_iolatency_exit() Yu Kuai
2021-09-23 13:46 ` [PATCH 5/6] blk-ioprio: introduce blkcg_ioprio_free() Yu Kuai
2021-09-23 13:46 ` [PATCH 6/6] rq-qos: fix uaf in rq_qos_done_io() Yu Kuai
2021-09-24 0:41 ` Ming Lei
2021-09-24 1:23 ` yukuai (C)
2021-09-24 1:49 ` Ming Lei
2021-09-24 8:19 ` yukuai (C) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bd4b9f4e-f0e6-907f-90d9-d49ae0f1cbad@huawei.com \
--to=yukuai3@huawei.com \
--cc=axboe@kernel.dk \
--cc=cgroups@vger.kernel.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.lei@redhat.com \
--cc=tj@kernel.org \
--cc=yi.zhang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®