Re: [PATCH 1/4] power: supply: axp20x_battery: add support for DT battery

[Quentin Schulz <quentin.schulz@free-electrons.com>]

Hi Chen-Yu,

On 16/05/2017 07:18, Chen-Yu Tsai wrote:
> On Thu, May 11, 2017 at 9:42 PM, Quentin Schulz
> <quentin.schulz@free-electrons.com> wrote:
>> This adds support in X-Powers AXP20X and AXP22X battery driver for a
>> fixed battery in DT.
>>
>> It will take the minimum supported voltage by the battery as defined in
>> the battery DT node and set the V_OFF register to this value, telling
>> the system to shut down if the supplied power is below this value.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
>> ---
>>  drivers/power/supply/axp20x_battery.c | 10 ++++++++++
>>  1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
>> index 5d29b2eab8fc..66f530541735 100644
>> --- a/drivers/power/supply/axp20x_battery.c
>> +++ b/drivers/power/supply/axp20x_battery.c
>> @@ -433,6 +433,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
>>  {
>>         struct axp20x_batt_ps *axp20x_batt;
>>         struct power_supply_config psy_cfg = {};
>> +       struct power_supply_battery_info info;
>>
>>         if (!of_device_is_available(pdev->dev.of_node))
>>                 return -ENODEV;
>> @@ -484,6 +485,15 @@ static int axp20x_power_probe(struct platform_device *pdev)
>>                 return PTR_ERR(axp20x_batt->batt);
>>         }
>>
>> +       if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
> 
> This is not in -next. It would help if you mention any requisite patches.
> 

I started working on this when next-20170503 was the latest and forgot
to rebase before sending the patch series. It was actually in both
next-20170502 and 20170503 but not in more recent ones.

Liam told me in a private message he's soon sending a new version of his
patch series, so I'll be waiting for the patches to reappear in next.

Thanks,
Quentin

> ChenYu
> 
>> +               int vmin = info.voltage_min_design_uv;
>> +
>> +               if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
>> +                                                             vmin))
>> +                       dev_err(&pdev->dev,
>> +                               "couldn't set voltage_min_design\n");
>> +       }
>> +
>>         return 0;
>>  }
>>
>> --
>> 2.11.0
>>

-- 
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com