From: Gavin Shan <gshan@redhat.com>
To: Anshuman Khandual <anshuman.khandual@arm.com>,
linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Will Deacon <will@kernel.com>,
catalin.marinas@arm.com, Steve Capper <steve.capper@arm.com>,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Marc Zyngier <maz@kernel.org>,
will@kernel.org
Subject: Re: [PATCH V3 1/3] arm64/mm/hotplug: Register boot memory hot remove notifier earlier
Date: Wed, 23 Sep 2020 16:04:56 +1000 [thread overview]
Message-ID: <bde102b0-7054-ae1d-d5d2-6348f4049d13@redhat.com> (raw)
In-Reply-To: <1600689908-28213-2-git-send-email-anshuman.khandual@arm.com>
Hi Anshuman,
On 9/21/20 10:05 PM, Anshuman Khandual wrote:
> This moves memory notifier registration earlier in the boot process from
> device_initcall() to early_initcall() which will help in guarding against
> potential early boot memory offline requests. Even though there should not
> be any actual offlinig requests till memory block devices are initialized
> with memory_dev_init() but then generic init sequence might just change in
> future. Hence an early registration for the memory event notifier would be
> helpful. While here, just skip the registration if CONFIG_MEMORY_HOTREMOVE
> is not enabled and also call out when memory notifier registration fails.
>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Steve Capper <steve.capper@arm.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> ---
> arch/arm64/mm/mmu.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
With the following nit-picky comments resolved:
Reviewed-by: Gavin Shan <gshan@redhat.com>
> diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
> index 75df62fea1b6..df3b7415b128 100644
> --- a/arch/arm64/mm/mmu.c
> +++ b/arch/arm64/mm/mmu.c
> @@ -1499,7 +1499,17 @@ static struct notifier_block prevent_bootmem_remove_nb = {
>
> static int __init prevent_bootmem_remove_init(void)
> {
> - return register_memory_notifier(&prevent_bootmem_remove_nb);
> + int ret = 0;
> +
> + if (!IS_ENABLED(CONFIG_MEMORY_HOTREMOVE))
> + return ret;
> +
> + ret = register_memory_notifier(&prevent_bootmem_remove_nb);
> + if (!ret)
> + return ret;
> +
> + pr_err("Notifier registration failed - boot memory can be removed\n");
> + return ret;
> }
It might be cleaner if the duplicated return statements can be
avoided. Besides, it's always nice to print the errno even though
zero is always returned from register_memory_notifier(). So I guess
you probably need something like below:
ret = register_memory_notifier(&prevent_bootmem_remove_nb);
if (ret)
pr_err("%s: Error %d registering notifier\n", __func__, ret)
return ret;
register_memory_notifier # 0 is returned on !CONFIG_MEMORY_HOTPLUG_SPARSE
blocking_notifier_chain_register
notifier_chain_register # 0 is always returned
> -device_initcall(prevent_bootmem_remove_init);
> +early_initcall(prevent_bootmem_remove_init);
> #endif
>
Cheers,
Gavin
next prev parent reply other threads:[~2020-09-23 6:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-21 12:05 [PATCH V3 0/3] arm64/mm/hotplug: Improve memory offline event notifier Anshuman Khandual
2020-09-21 12:05 ` [PATCH V3 1/3] arm64/mm/hotplug: Register boot memory hot remove notifier earlier Anshuman Khandual
2020-09-23 6:04 ` Gavin Shan [this message]
2020-09-24 3:23 ` Anshuman Khandual
2020-09-21 12:05 ` [PATCH V3 2/3] arm64/mm/hotplug: Enable MEM_OFFLINE event handling Anshuman Khandual
2020-09-23 4:44 ` Anshuman Khandual
2020-09-23 6:31 ` Gavin Shan
2020-09-24 3:51 ` Anshuman Khandual
2020-09-21 12:05 ` [PATCH V3 3/3] arm64/mm/hotplug: Ensure early memory sections are all online Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bde102b0-7054-ae1d-d5d2-6348f4049d13@redhat.com \
--to=gshan@redhat.com \
--cc=anshuman.khandual@arm.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=steve.capper@arm.com \
--cc=will@kernel.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®