Re: [RFC PATCH] sched/fair: Introduce WAKEUP_BIAS_PREV_IDLE to reduce migrations

[Mathieu Desnoyers <mathieu.desnoyers@efficios.com>]

On 2023-10-15 11:44, Chen Yu wrote:
> On 2023-10-12 at 16:36:26 -0400, Mathieu Desnoyers wrote:
>> Introduce the WAKEUP_BIAS_PREV_IDLE scheduler feature to reduce the
>> task migration rate.
>>
>> For scenarios where the system is under-utilized (CPUs are partly idle),
>> eliminate frequent task migrations from almost idle CPU to completely
>> idle CPUs by introducing a bias towards the previous CPU if it is idle
>> or almost idle in select_idle_sibling(). Use 1% of the CPU capacity
>> of the previously used CPU as CPU utilization "almost idle" cutoff.
>>
>> +
>> +/*
>> + * A runqueue is considered almost idle if:
>> + *
>> + *   cpu_util_without(cpu, p) / 1024 <= 1% * capacity_of(cpu)
> 
> util_avg is in the range [0:1024], thus cpu_util_without(cpu, p) / 1024
> is <= 1, and 1% * cap is 10, so 1 <= 10 is always true.
> I suppose you want to compare:
>   (cpu_util_without(cpu, p) / capacity_orig_of(cpu)) <= 1% ->
>      cpu_util_without(cpu, p) * 100 <= capacity_orig_of(cpu) ?

Good point!

Now that I have fixed this, I come back to a situation where:

- load_avg works, probably because it multiplies by the weight, and 
therefore when there are few tasks on the runqueue it reflects the fact 
that the runqueue is almost idle. Even though it happens to work, it 
does not appear to be an elegant solution.

- util_avg and runnable_avg do not work. Probably because they take into 
account both running/runnable and recently blocked tasks, so they cannot 
be used to provide a clear picture of the very-short-term idleness 
status for the purpose of selecting a prev rq.

I wonder if there are any rq stats I can use which do not include 
recently blocked tasks ?

Thanks,

Mathieu


> 
> thanks,
> Chenyu
>   
> 

-- 
Mathieu Desnoyers
EfficiOS Inc.
https://www.efficios.com