From: Guenter Roeck <linux@roeck-us.net>
To: "Joaquín Ignacio Aramendía" <samsagax@gmail.com>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
gregkh@linuxfoundation.org
Subject: Re: [PATCH v2 1/2] hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups
Date: Tue, 18 Jul 2023 19:42:34 -0700 [thread overview]
Message-ID: <bf0f1dc5-35b8-4a72-be11-692e82fe6ab9@roeck-us.net> (raw)
In-Reply-To: <20230717222526.229984-2-samsagax@gmail.com>
On Mon, Jul 17, 2023 at 07:25:15PM -0300, Joaquín Ignacio Aramendía wrote:
> A driver should not be manually adding groups in its probe function (it will
> race with userspace), so replace the call to devm_device_add_groups() to use
> the platform dev_groups callback instead.
>
> This will allow for removal of the devm_device_add_groups() function.
>
> Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Applied.
Thanks,
Guenter
> ---
> drivers/hwmon/oxp-sensors.c | 38 +++++++++++++++++++++++--------------
> 1 file changed, 24 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/hwmon/oxp-sensors.c b/drivers/hwmon/oxp-sensors.c
> index e1a907cae820..1e1cc67bcdea 100644
> --- a/drivers/hwmon/oxp-sensors.c
> +++ b/drivers/hwmon/oxp-sensors.c
> @@ -220,6 +220,20 @@ static int tt_toggle_disable(void)
> }
>
> /* Callbacks for turbo toggle attribute */
> +static umode_t tt_toggle_is_visible(struct kobject *kobj,
> + struct attribute *attr, int n)
> +{
> + switch (board) {
> + case aok_zoe_a1:
> + case oxp_mini_amd_a07:
> + case oxp_mini_amd_pro:
> + return attr->mode;
> + default:
> + break;
> + }
> + return 0;
> +}
> +
> static ssize_t tt_toggle_store(struct device *dev,
> struct device_attribute *attr, const char *buf,
> size_t count)
> @@ -396,7 +410,15 @@ static struct attribute *oxp_ec_attrs[] = {
> NULL
> };
>
> -ATTRIBUTE_GROUPS(oxp_ec);
> +static struct attribute_group oxp_ec_attribute_group = {
> + .is_visible = tt_toggle_is_visible,
> + .attrs = oxp_ec_attrs,
> +};
> +
> +static const struct attribute_group *oxp_ec_groups[] = {
> + &oxp_ec_attribute_group,
> + NULL
> +};
>
> static const struct hwmon_ops oxp_ec_hwmon_ops = {
> .is_visible = oxp_ec_hwmon_is_visible,
> @@ -415,7 +437,6 @@ static int oxp_platform_probe(struct platform_device *pdev)
> const struct dmi_system_id *dmi_entry;
> struct device *dev = &pdev->dev;
> struct device *hwdev;
> - int ret;
>
> /*
> * Have to check for AMD processor here because DMI strings are the
> @@ -430,18 +451,6 @@ static int oxp_platform_probe(struct platform_device *pdev)
>
> board = (enum oxp_board)(unsigned long)dmi_entry->driver_data;
>
> - switch (board) {
> - case aok_zoe_a1:
> - case oxp_mini_amd_a07:
> - case oxp_mini_amd_pro:
> - ret = devm_device_add_groups(dev, oxp_ec_groups);
> - if (ret)
> - return ret;
> - break;
> - default:
> - break;
> - }
> -
> hwdev = devm_hwmon_device_register_with_info(dev, "oxpec", NULL,
> &oxp_ec_chip_info, NULL);
>
> @@ -451,6 +460,7 @@ static int oxp_platform_probe(struct platform_device *pdev)
> static struct platform_driver oxp_platform_driver = {
> .driver = {
> .name = "oxp-platform",
> + .dev_groups = oxp_ec_groups,
> },
> .probe = oxp_platform_probe,
> };
next prev parent reply other threads:[~2023-07-19 2:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-17 22:25 [PATCH v2 0/2] hwmon: (oxp-sensors) Refactor probe() and init() and remove devm_add_groups() Joaquín Ignacio Aramendía
2023-07-17 22:25 ` [PATCH v2 1/2] hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups Joaquín Ignacio Aramendía
2023-07-18 13:39 ` Greg KH
2023-07-19 2:42 ` Guenter Roeck [this message]
2023-07-17 22:25 ` [PATCH v2 2/2] hwmon: (oxp-sensors) Move board detection to the init function Joaquín Ignacio Aramendía
2023-07-18 13:40 ` Greg KH
2023-07-19 2:47 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bf0f1dc5-35b8-4a72-be11-692e82fe6ab9@roeck-us.net \
--to=linux@roeck-us.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=samsagax@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®