Re: [PATCH] PCI/PM: Avoid D3cold for HP Spectre x360 Convertible 15-ch0xx PCIe Ports

[Mario Limonciello <superm1@kernel.org>]

On 6/28/2024 19:17, superm1@kernel.org wrote:
> From: Mario Limonciello <mario.limonciello@amd.com>
> 
> HP Spectre x360 Convertible 15-ch0xx is an Intel Kaby Lake-G system that
> contains an AMD Polaris Radeon dGPU.
> Attempting to use the dGPU fails with the following sequence:
> 
>    amdgpu 0000:01:00.0: not ready 1023ms after resume; waiting
>    amdgpu 0000:01:00.0: not ready 2047ms after resume; waiting
>    amdgpu 0000:01:00.0: not ready 4095ms after resume; waiting
>    amdgpu 0000:01:00.0: not ready 8191ms after resume; waiting
>    amdgpu 0000:01:00.0: not ready 16383ms after resume; waiting
>    amdgpu 0000:01:00.0: not ready 32767ms after resume; waiting
>    amdgpu 0000:01:00.0: not ready 65535ms after resume; giving up
>    amdgpu 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
>    [drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than 20secs aborting
> 
> The issue is that the Root Port the dGPU is connected to can't handle the
> transition from D3cold to D0 so the dGPU can't properly exit runtime PM.
> 
> The existing logic in pci_bridge_d3_possible() checks for systems that are
> newer than 2015 to decide that D3 is safe, but this system appears not to
> work properly.
> 
> Add the system to bridge_d3_blacklist to prevent D3cold from being used.
> 
> Reported-and-tested-by: Tony Murray <murraytony@gmail.com>
> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3389
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/pci/pci.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 35fb1f17a589..65e3a550052f 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2965,6 +2965,17 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
>   			DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
>   		},
>   	},
> +	{
> +		/*
> +		 * Changing power state of root port dGPU is connected fails
> +		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
> +		 */
> +		.ident = "HP Spectre x360 Convertible 15-ch0xx",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
> +			DMI_MATCH(DMI_BOARD_NAME, "83BB"),
> +		},
> +	},
>   #endif
>   	{ }
>   };

Bjorn,

Ping on this one.  It's a trivial quirk that Tony and I already root 
caused on Gitlab, I'd hope this can be squeezed in.

Thanks,