On Wed, 11 Jun 2025, Jiri Slaby (SUSE) wrote: > serial8250_do_set_termios() consists of many registers and up flags > settings. Extract all these into separate functions. This time, setting > of CSIZE for UART_CAP_MINI ports. > > Signed-off-by: Jiri Slaby (SUSE) > --- > drivers/tty/serial/8250/8250_port.c | 24 +++++++++++++++++------- > 1 file changed, 17 insertions(+), 7 deletions(-) > > diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c > index a73f4db22feb..edfbaa6b7a1b 100644 > --- a/drivers/tty/serial/8250/8250_port.c > +++ b/drivers/tty/serial/8250/8250_port.c > @@ -2670,6 +2670,22 @@ void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) > } > EXPORT_SYMBOL_GPL(serial8250_update_uartclk); > > +static void serial8250_set_mini(struct uart_port *port, struct ktermios *termios) > +{ > + struct uart_8250_port *up = up_to_u8250p(port); > + > + if (!(up->capabilities & UART_CAP_MINI)) > + return; > + > + termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); > + > + tcflag_t csize = termios->c_cflag & CSIZE; > + if (csize == CS5 || csize == CS6) { > + termios->c_cflag &= ~CSIZE; > + termios->c_cflag |= CS7; > + } > +} > + > void > serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, > const struct ktermios *old) > @@ -2679,14 +2695,8 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, > unsigned long flags; > unsigned int baud, quot, frac = 0; > > - if (up->capabilities & UART_CAP_MINI) { > - termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); > - if ((termios->c_cflag & CSIZE) == CS5 || > - (termios->c_cflag & CSIZE) == CS6) > - termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7; > - } > + serial8250_set_mini(port, termios); > cval = serial8250_compute_lcr(up, termios->c_cflag); > - > baud = serial8250_get_baud_rate(port, termios, old); > quot = serial8250_get_divisor(port, baud, &frac); > > Reviewed-by: Ilpo Järvinen -- i.