Re: [PATCH 3/4] dt-bindings: rtc: update stm32-rtc documentation for st,syscfg property

[Amelie DELAUNAY <amelie.delaunay@st.com>]

Hi,

On 05/04/2018 09:40 AM, Alexandre Torgue wrote:
> Hi Alexandre,
> 
> On 05/03/2018 10:53 PM, Alexandre Belloni wrote:
>> Amelie,
>>
>> On 26/04/2018 21:58:03-0500, Rob Herring wrote:
>>> On Thu, Apr 19, 2018 at 03:21:42PM +0200, Amelie Delaunay wrote:
>>>> RTC driver should not be aware of the PWR registers offset and bits
>>>> position. Furthermore, we can imagine that Disable Backup Protection 
>>>> (DBP)
>>>> relative register and bit mask could change depending on the SoC. So 
>>>> this
>>>> patch moves st,syscfg property from single pwrcfg phandle to pwrcfg
>>>> phandle/offset/mask triplet.
>>>>
>>>> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
>>>> ---
>>>>   Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt | 10 
>>>> ++++++----
>>>>   1 file changed, 6 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt 
>>>> b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
>>>> index a66692a..00f8b5d 100644
>>>> --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
>>>> +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
>>>> @@ -14,8 +14,10 @@ Required properties:
>>>>       It is required only on stm32h7.
>>>>   - interrupt-parent: phandle for the interrupt controller.
>>>>   - interrupts: rtc alarm interrupt.
>>>> -- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup 
>>>> domain
>>>> -  (RTC registers) write protection.
>>>> +- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg 
>>>> used to
>>>> +  access control register at offset, and change the dbp (Disable 
>>>> Backup
>>>> +  Protection) bit represented by the mask, mandatory to 
>>>> disable/enable backup
>>>> +  domain (RTC registers) write protection.
>>>
>>> It's fine to add this, but you are breaking compatibility in the driver
>>> with existing DTBs by requiring these new fields.
>>>
>>
>> I'm fine with that change but I would like confirmation that this has
>> been well thought. Maybe Maxime or Alexandre could give their ack.
>>
> 
> It's a good thing to remove PWR registers information from RTC driver. 
> My only concern was the compatibility with old DT but we can accept it. 
> Indeed, Kernel will continue to boot fine, only RTC will not probe if we 
> use old DT.
> 
> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
> 
> Regards
> alex

I am going to send a series to update st,syscfg property in 
stm32f429/stm32f746/stm32h743 RTC node.

Thanks,
Amelie