From: Marcin Dalecki <martin@dalecki.de>
To: Arjan van de Ven <arjan@infradead.org>
Cc: linux-kernel@vger.kernel.org, Chuck <chunkeey@web.de>
Subject: Re: How's the nforce4 support in Linux?
Date: Sat, 26 Mar 2005 18:32:04 +0100 [thread overview]
Message-ID: <bf8a98cafc4141c67d3b4cabfde65ed2@dalecki.de> (raw)
In-Reply-To: <1111850358.8042.34.camel@laptopd505.fenrus.org>
On 2005-03-26, at 16:19, Arjan van de Ven wrote:
> `
>> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
>> hda: dma_intr: error=0x84 { DriveStatusError BadCRC
>
> BadCRC is 99% sure a cabling issue; either a bad/overheated cable or a
> cable used at too high a speed for the cable.
No. It is more likely that the timing programming between the disk and
host controller
are in a miss-match state. UDMA mode detection can come in to mind too.
It makes sense to experiment with hdparm to see if the problem goes
away in non
Ultra DMA modes.
next prev parent reply other threads:[~2005-03-26 17:32 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-26 16:01 Chuck
2005-03-26 15:19 ` Arjan van de Ven
2005-03-26 17:32 ` Marcin Dalecki [this message]
2005-03-27 12:26 ` Chuck
2005-04-02 23:55 ` Julien Wajsberg
-- strict thread matches above, loose matches on Subject: below --
2005-03-25 22:59 Julien Wajsberg
2005-03-25 23:14 ` Lee Revell
2005-03-26 0:38 ` Julien Wajsberg
2005-03-26 0:48 ` Lee Revell
2005-03-29 18:58 ` Tomasz Torcz
2005-03-29 20:40 ` Lee Revell
2005-03-30 15:00 ` Tomasz Torcz
2005-03-30 16:45 ` Lennart Sorensen
2005-03-30 19:19 ` Martin Schlemmer
2005-03-30 21:01 ` Lee Revell
2005-03-31 5:58 ` Martin Schlemmer
2005-03-25 23:20 ` Lee Revell
2005-03-26 0:17 ` Julien Wajsberg
2005-03-26 14:13 ` Michal Schmidt
2005-03-29 6:47 ` Julien Wajsberg
2005-03-25 23:21 ` Lee Revell
2005-03-25 23:41 ` Julien Wajsberg
2005-04-05 13:42 ` Julien Wajsberg
2005-04-05 14:10 ` Richard B. Johnson
2005-04-05 22:58 ` Julien Wajsberg
2005-04-06 11:41 ` Richard B. Johnson
2005-04-06 16:02 ` Bartlomiej Zolnierkiewicz
2005-04-10 23:43 ` Julien Wajsberg
2005-04-10 23:27 ` Julien Wajsberg
2005-03-25 9:37 Chuck Ebbert
[not found] <3LwFC-4Ko-15@gated-at.bofh.it>
[not found] ` <3LwYW-4Xx-11@gated-at.bofh.it>
[not found] ` <3LwYZ-4Xx-25@gated-at.bofh.it>
2005-03-24 10:00 ` Asfand Yar Qazi
2005-03-24 10:11 ` Arjan van de Ven
2005-03-24 16:29 ` Lennart Sorensen
2005-03-24 16:41 ` Raphael Jacquot
2005-03-24 20:41 ` Jeff Garzik
2005-03-25 2:15 ` Robert Hancock
2005-03-25 2:40 ` Lee Revell
[not found] <3Lxis-5a0-29@gated-at.bofh.it>
[not found] ` <3Lxis-5a0-31@gated-at.bofh.it>
[not found] ` <3Lxis-5a0-33@gated-at.bofh.it>
[not found] ` <3Lxis-5a0-27@gated-at.bofh.it>
2005-03-24 10:11 ` Asfand Yar Qazi
2005-03-24 9:20 Asfand Yar Qazi
2005-03-24 9:30 ` Jeff Garzik
2005-03-24 9:34 ` Arjan van de Ven
2005-03-24 10:03 ` Tupshin Harper
2005-03-24 16:27 ` Lennart Sorensen
2005-03-24 21:01 ` Jeff Garzik
2005-03-28 15:31 ` Andi Kleen
2005-03-30 19:42 ` Jeff Garzik
2005-03-30 20:17 ` Indrek Kruusa
2005-03-30 20:25 ` Jeff Garzik
2005-03-30 20:48 ` Indrek Kruusa
2005-03-30 21:06 ` Francois Romieu
2005-03-30 21:47 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bf8a98cafc4141c67d3b4cabfde65ed2@dalecki.de \
--to=martin@dalecki.de \
--cc=arjan@infradead.org \
--cc=chunkeey@web.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome