Re: [PATCH] rtc: rs5c372: Add support of RTC_VL_READ ioctl

[Camel Guo <camelg@axis.com>]

Hi,

After discussion internally on this patch, we would like to abandon this 
patch and purpose this one 
https://lore.kernel.org/linux-rtc/20211110115455.18699-1-camel.guo@axis.com/T/#u 
instead. Sorry for the inconvenience and please review that patch instead.

Best Regards
Camel Guo

On 11/5/21 1:40 AM, Pavel Modilaynen wrote:
> From: Pavel Modilaynen <pavelmn@lnxpavelmn.se.axis.com>
> 
> Read, cache and expose with RTC_VL_READ ioctl low voltage
> detection flag. It is supported on all devices except RS5C372A/B,
> for which osciallation halt detection bit is interpreted
> as low voltage condition.
> Add RTC_VL_CLEAR ioctl to clear the cached value.
> 
> Signed-off-by: Pavel Modilaynen <pavelmn@lnxpavelmn.se.axis.com>
> ---
>   drivers/rtc/rtc-rs5c372.c | 46 +++++++++++++++++++++++++++++++++++++++
>   1 file changed, 46 insertions(+)
> 
> diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
> index 80980414890c..68d2ed9670c4 100644
> --- a/drivers/rtc/rtc-rs5c372.c
> +++ b/drivers/rtc/rtc-rs5c372.c
> @@ -126,6 +126,7 @@ struct rs5c372 {
>   	unsigned		smbus:1;
>   	char			buf[17];
>   	char			*regs;
> +	int			voltage_low;
>   };
>   
>   static int rs5c_get_regs(struct rs5c372 *rs5c)
> @@ -216,22 +217,40 @@ static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm)
>   	if (status < 0)
>   		return status;
>   
> +	/* check the warning bits */
>   	switch (rs5c->type) {
>   	case rtc_r2025sd:
>   	case rtc_r2221tl:
>   		if ((rs5c->type == rtc_r2025sd && !(ctrl2 & R2x2x_CTRL2_XSTP)) ||
>   		    (rs5c->type == rtc_r2221tl &&  (ctrl2 & R2x2x_CTRL2_XSTP))) {
>   			dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n");
> +			/* keep it as indicator of low/dead battery */
> +			rs5c->voltage_low = 1;
>   			return -EINVAL;
>   		}
>   		break;
>   	default:
>   		if (ctrl2 & RS5C_CTRL2_XSTP) {
>   			dev_warn(&client->dev, "rtc oscillator interruption detected. Please reset the rtc clock.\n");
> +			/* keep it as indicator of low/dead battery */
> +			rs5c->voltage_low = 1;
>   			return -EINVAL;
>   		}
>   	}
>   
> +
> +	switch (rs5c->type) {
> +	case rtc_rs5c372a:
> +	case rtc_rs5c372b:
> +		break;
> +	default:
> +		if (ctrl2 & R2x2x_CTRL2_VDET) {
> +			rs5c->voltage_low = 1;
> +			dev_warn(&client->dev, "low voltage detected\n");
> +		}
> +		break;
> +	}
> +
>   	tm->tm_sec = bcd2bin(rs5c->regs[RS5C372_REG_SECS] & 0x7f);
>   	tm->tm_min = bcd2bin(rs5c->regs[RS5C372_REG_MINS] & 0x7f);
>   	tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]);
> @@ -485,6 +504,32 @@ static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
>   #define	rs5c372_rtc_proc	NULL
>   #endif
>   
> +#ifdef CONFIG_RTC_INTF_DEV
> +static int rs5c372_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
> +{
> +	struct rs5c372	*rs5c = i2c_get_clientdata(to_i2c_client(dev));
> +
> +	dev_dbg(dev, "%s: cmd=%x\n", __func__, cmd);
> +
> +	switch (cmd) {
> +	case RTC_VL_READ:
> +		if (rs5c->voltage_low)
> +			dev_info(dev, "low voltage detected, date/time is not reliable.\n");
> +
> +		return put_user(rs5c->voltage_low, (unsigned int __user *)arg);
> +	case RTC_VL_CLR:
> +		/* Clear the cached value. */
> +		rs5c->voltage_low = 0;
> +		return 0;
> +	default:
> +		return -ENOIOCTLCMD;
> +	}
> +	return 0;
> +}
> +#else
> +#define rs5c372_ioctl	NULL
> +#endif
> +
>   static const struct rtc_class_ops rs5c372_rtc_ops = {
>   	.proc		= rs5c372_rtc_proc,
>   	.read_time	= rs5c372_rtc_read_time,
> @@ -492,6 +537,7 @@ static const struct rtc_class_ops rs5c372_rtc_ops = {
>   	.read_alarm	= rs5c_read_alarm,
>   	.set_alarm	= rs5c_set_alarm,
>   	.alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
> +	.ioctl		= rs5c372_ioctl,
>   };
>   
>   #if IS_ENABLED(CONFIG_RTC_INTF_SYSFS)
>