From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Mark Brown <broonie@kernel.org>, Lee Jones <lee.jones@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 02/18] staging: hikey9xx: hisilicon,hi6421-spmi-pmic.yaml: simplify props
Date: Tue, 19 Jan 2021 11:14:07 +0100 [thread overview]
Message-ID: <bfb4ecb4a6b830259f59bfe1da203d9c01997d2f.1611048785.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1611048785.git.mchehab+huawei@kernel.org>
As all regulator-specific properties got moved to be part of the
driver, remove them from the DT spec.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 106 +++++++-----------
1 file changed, 40 insertions(+), 66 deletions(-)
diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
index 80e74c261e05..f385146d2bd1 100644
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
@@ -55,47 +55,6 @@ properties:
$ref: "/schemas/regulator/regulator.yaml#"
- properties:
- reg:
- description: Enable register.
-
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- vsel-reg:
- description: Voltage selector register.
-
- enable-mask:
- description: Bitmask used to enable the regulator.
-
- voltage-table:
- description: Table with the selector items for the voltage regulator.
- minItems: 2
- maxItems: 16
-
- off-on-delay-us:
- description: Time required for changing state to enabled in microseconds.
-
- startup-delay-us:
- description: Startup time in microseconds.
-
- idle-mode-mask:
- description: Bitmask used to put the regulator on idle mode.
-
- eco-microamp:
- description: Maximum current while on idle mode.
-
- required:
- - reg
- - vsel-reg
- - enable-mask
- - voltage-table
- - off-on-delay-us
- - startup-delay-us
-
required:
- compatible
- reg
@@ -117,43 +76,58 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- ldo3: ldo3@16 {
- reg = <0x16>;
- vsel-reg = <0x51>;
-
+ ldo3: LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2000000>;
regulator-boot-on;
-
- enable-mask = <0x01>;
-
- voltage-table = <1500000>, <1550000>, <1600000>, <1650000>,
- <1700000>, <1725000>, <1750000>, <1775000>,
- <1800000>, <1825000>, <1850000>, <1875000>,
- <1900000>, <1925000>, <1950000>, <2000000>;
- off-on-delay-us = <20000>;
- startup-delay-us = <120>;
};
- ldo4: ldo4@17 { /* 40 PIN */
- reg = <0x17>;
- vsel-reg = <0x52>;
-
+ ldo4: LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <1900000>;
regulator-boot-on;
+ };
- enable-mask = <0x01>;
- idle-mode-mask = <0x10>;
- eco-microamp = <10000>;
+ ldo9: LDO9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
- hi6421-vsel = <0x52 0x07>;
- voltage-table = <1725000>, <1750000>, <1775000>, <1800000>,
- <1825000>, <1850000>, <1875000>, <1900000>;
- off-on-delay-us = <20000>;
- startup-delay-us = <120>;
+ ldo15: LDO15 {
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16: LDO16 {
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17: LDO17 {
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33: LDO33 {
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34: LDO34 {
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
};
};
};
--
2.29.2
next prev parent reply other threads:[~2021-01-19 10:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-19 10:14 [PATCH v3 00/18] Move Hisilicon 6421v600 SPMI driver set out of staging Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 01/18] staging: hikey9xx: hisilicon,hisi-spmi-controller.yaml fix bindings Mauro Carvalho Chehab
2021-01-19 10:14 ` Mauro Carvalho Chehab [this message]
2021-01-19 10:14 ` [PATCH v3 03/18] staging: hikey9xx: hisi-spmi-controller: clean sparse warnings Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 04/18] staging: hikey9xx: hi6421v600-regulator: do some cleanups Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 05/18] staging: hikey9xx: hi6421v600-regulator: move LDO config from DT Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 06/18] staging: hikey9xx: hi6421v600-regulator: cleanup debug msgs Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 07/18] staging: hikey9xx: hi6421v600-regulator: get rid of an static data Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 08/18] staging: hikey9xx: hi6421v600-regulator: do some cleanups Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 09/18] staging: hikey9xx: hi6421v600-regulator: update copyright Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 10/18] staging: hikey9xx: hi6421v600-regulator: fix delay logic Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 11/18] staging: hikey9xx: hi6421v600-regulator: cleanup comments Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 12/18] staging: hikey9xx: hi6421v600-regulator: fix get_optimum_mode Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 13/18] staging: hikey9xx: hisilicon,hi6421-spmi-pmic.yaml: cleanup a warning Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 14/18] spmi: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 15/18] mfd: " Mauro Carvalho Chehab
2021-01-19 13:46 ` Mark Brown
2021-01-19 15:50 ` Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 16/18] regulator: hi6421v600-regulator: move it " Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 17/18] dts: hisilicon: add support for USB3 on Hikey 970 Mauro Carvalho Chehab
2021-01-19 10:14 ` [PATCH v3 18/18] dts: hisilicon: add support for the PMIC found " Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bfb4ecb4a6b830259f59bfe1da203d9c01997d2f.1611048785.git.mchehab+huawei@kernel.org \
--to=mchehab+huawei@kernel.org \
--cc=broonie@kernel.org \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®