mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	markgross@kernel.org
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/4] platform/x86/intel/uncore-freq: Enhance HW interface
Date: Thu, 17 Feb 2022 13:25:43 +0100	[thread overview]
Message-ID: <bfbf91a7-1266-89da-c242-9fef14b6fc70@redhat.com> (raw)
In-Reply-To: <20220204000306.2517447-1-srinivas.pandruvada@linux.intel.com>

Hi,

On 2/4/22 01:03, Srinivas Pandruvada wrote:
> The uncore frequency scaling is getting used by more customers to either
> have a deterministic performance or control power consumption.
> The uncore frequency scaling depends on non architecture MSRs, format of
> those MSR can be different on different generations of CPUs.
> This series prepares for easy addition of new HW interface.
> 
> There are no functional changes done except adding a new addition to
> read uncore frequency.
> 
> - The first patch creates a separate folder for uncore-freq.
> - The second patch uses sysfs groups to create attributes.
> - The third patch adds capability to read current uncore frequency.
> - The fourth patch splits common and enumeration part. The enumeration
> part will be specific to each HW interface.
> 
> Srinivas Pandruvada (4):
>   platform/x86/intel/uncore-freq: Move to uncore-frequency folder
>   platform/x86/intel/uncore-freq: Use sysfs API to create attributes
>   platform/x86/intel/uncore-freq: Display uncore current frequency
>   platform/x86/intel-uncore-freq: Split common and enumeration part

Thank you for your patch-series, I've applied the series to my
review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Note I've squashed a small MAINTAINERS change in to patch 1/4 so
that the maintainers entry now points to the new sub-dir.

Regards,

Hans



> 
>  drivers/platform/x86/intel/Kconfig            |  14 +-
>  drivers/platform/x86/intel/Makefile           |   4 +-
>  drivers/platform/x86/intel/uncore-frequency.c | 452 ------------------
>  .../x86/intel/uncore-frequency/Kconfig        |  21 +
>  .../x86/intel/uncore-frequency/Makefile       |   9 +
>  .../uncore-frequency-common.c                 | 252 ++++++++++
>  .../uncore-frequency-common.h                 |  62 +++
>  .../intel/uncore-frequency/uncore-frequency.c | 272 +++++++++++
>  8 files changed, 620 insertions(+), 466 deletions(-)
>  delete mode 100644 drivers/platform/x86/intel/uncore-frequency.c
>  create mode 100644 drivers/platform/x86/intel/uncore-frequency/Kconfig
>  create mode 100644 drivers/platform/x86/intel/uncore-frequency/Makefile
>  create mode 100644 drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c
>  create mode 100644 drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h
>  create mode 100644 drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c
> 


      parent reply	other threads:[~2022-02-17 12:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-04  0:03 Srinivas Pandruvada
2022-02-04  0:03 ` [PATCH 1/4] platform/x86/intel/uncore-freq: Move to uncore-frequency folder Srinivas Pandruvada
2022-02-04  0:03 ` [PATCH 2/4] platform/x86/intel/uncore-freq: Use sysfs API to create attributes Srinivas Pandruvada
2022-02-04  0:03 ` [PATCH 3/4] platform/x86/intel/uncore-freq: Display uncore current frequency Srinivas Pandruvada
2022-02-04  0:03 ` [PATCH 4/4] platform/x86/intel-uncore-freq: Split common and enumeration part Srinivas Pandruvada
2022-02-17 12:25 ` Hans de Goede [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bfbf91a7-1266-89da-c242-9fef14b6fc70@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=srinivas.pandruvada@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®