From: Nora Schiffer <nora.schiffer@ew.tq-group.com>
To: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Alexander Stein <alexander.stein@ew.tq-group.com>,
linux-arm-kernel@lists.infradead.org, linux@ew.tq-group.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: freescale: fsl-ls1028a-tqmls1028a-mbls1028a: switch mmc aliases
Date: Tue, 17 Mar 2026 09:29:29 +0100 [thread overview]
Message-ID: <bfd19beec4ccbe296cdc1da865b15caf3ad1e5cc.camel@ew.tq-group.com> (raw)
In-Reply-To: <20260224152523.570057-1-nora.schiffer@ew.tq-group.com>
On Tue, 2026-02-24 at 16:25 +0100, Nora Schiffer wrote:
> All modern TQ-Systems boards follow the convention that mmc0 is the eMMC
> and mmc1 is the SD-card when both interfaces exist, reducing differences
> between boards for both documentation and U-Boot code (which uses the
> same Device Trees). Adjust the recently added MBLS1028A Device Tree
> accordingly.
>
> Fixes: 0538ca1f102d ("arm64: dts: ls1028a: Add mbls1028a and mbls1028a-ind devicetrees")
> Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
>
> v2:
> - updated author information after name change
> - collected review tags
>
> As mentioned in the v1 submission, it would be great to get this in
> before v7.0, as the TQMLS1028A/MBLS1028A was just added in the current
> development cycle, and we'd like to avoid changing the aliases after the
> DTS was part of a mainline kernel release.
>
> Best,
> Nora
Hi Frank,
can we get this applied, so the change makes it into v7.0?
Best,
Nora
>
>
> .../boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi
> index cf338b2e80064..426a81e1743f1 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi
> @@ -17,8 +17,8 @@ aliases {
> gpio0 = &gpio1;
> gpio1 = &gpio2;
> gpio2 = &gpio3;
> - mmc0 = &esdhc; /* SD-Card */
> - mmc1 = &esdhc1; /* eMMC */
> + mmc0 = &esdhc1; /* eMMC */
> + mmc1 = &esdhc; /* SD-Card */
> serial0 = &duart0;
> serial1 = &duart1;
> };
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/
next prev parent reply other threads:[~2026-03-17 8:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-24 15:25 Nora Schiffer
2026-03-17 8:29 ` Nora Schiffer [this message]
2026-04-01 11:31 ` Nora Schiffer
2026-06-02 9:56 ` Nora Schiffer
2026-06-02 20:38 ` Frank Li
2026-06-02 20:34 ` Frank.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bfd19beec4ccbe296cdc1da865b15caf3ad1e5cc.camel@ew.tq-group.com \
--to=nora.schiffer@ew.tq-group.com \
--cc=Frank.Li@nxp.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®