From: "Henning P. Schmiedehausen" <hps@intermeta.de>
To: linux-kernel@vger.kernel.org
Subject: Re: Intel ICH5 APIC, ACPI problems in 2.4
Date: Wed, 13 Aug 2003 08:32:46 +0000 (UTC) [thread overview]
Message-ID: <bhct3e$s29$1@tangens.hometree.net> (raw)
In-Reply-To: <3F37D13D.7080309@pobox.com>
Jeff Garzik <jgarzik@pobox.com> writes:
>I have a couple uniprocessor ICH5 systems from different vendors, with
>similar behavior:
>2.6: HyperThreading works, ACPI works, all irqs properly routed
>2.4: HT works only works with ACPI enabled, but,
> ACPI kills the irq routing for the external PCI slots.
> pci=noacpi or whatever doesn't work. !CONFIG_ACPI + "noapic"
> fixes irq routing, but then no HT sibling appears.
To give a datapoint:
ICH5 works like a breeze with RH 2.4.20-19.9 kernel:
% lspci -vt
-[00]-+-00.0 Intel Corp. 82865G [Springdale-G] Chipset Host Bridge
[...]
+-1f.1 Intel Corp. 82801EB ICH5 IDE
[...]
% cat /proc/cpuinfo | grep -i genuine | wc -l
2
% dmesg
Linux version 2.4.20-19.9smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP Tue Jul 15 17:04:18 EDT 2003
[...]
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00f5b40
RSD PTR v0 [ACPIAM]
ACPI table found: RSDT v1 [INTEL D865PERL 8195.1813]
ACPI table found: FACP v2 [INTEL D865PERL 8195.1813]
ACPI table found: APIC v1 [INTEL D865PERL 8195.1813]
LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
LAPIC_NMI (acpi_id[0x0001] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC (acpi_id[0x0002] id[0x1] enabled[1])
CPU 1 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16
[...]
This is an intel 865 PERLK desktop board with a 2,6 GHz HT CPU. Even
the ICH5 serial ATA works which really had me impressed:
ICH5-SATA: IDE controller at PCI slot 00:1f.2
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 18
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
hde: Maxtor 6Y120M0, ATA DISK drive
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63, UDMA(33)
(The UDMA(33) seems to be a lie, I can read ~ 57 MBytes/sec from this disk).
So there might be some patches in the RH kernel, that are missing from
2.4.22-rc2
Regards
Henning
--
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen INTERMETA GmbH
hps@intermeta.de +49 9131 50 654 0 http://www.intermeta.de/
Java, perl, Solaris, Linux, xSP Consulting, Web Services
freelance consultant -- Jakarta Turbine Development -- hero for hire
"Dominate!! Dominate!! Eat your young and aggregate! I have grotty silicon!"
-- AOL CD when played backwards (User Friendly - 200-10-15)
next prev parent reply other threads:[~2003-08-13 8:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-11 17:24 Jeff Garzik
2003-08-13 8:32 ` Henning P. Schmiedehausen [this message]
2003-08-11 22:42 Brown, Len
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='bhct3e$s29$1@tangens.hometree.net' \
--to=hps@intermeta.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®