mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Julien Langer <julien.langer@googlemail.com>
To: linux-kernel@vger.kernel.org
Subject: [PATCH]: at91 slowclock: fix two bugs when disabling the PLLs
Date: Tue, 1 Dec 2009 08:22:48 +0100	[thread overview]
Message-ID: <c006aa4b0911302322v769520bbt733dde1451a8e50@mail.gmail.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 732 bytes --]

Hi,

attached are two patches which fix two problems with the at91 slowclock code:

the first one fixes a problem during suspend: When turning off the
PLLs, wait for the LOCKA/LOCKB flags to be unset instead of being set
(which will never happen).

The second patch fixes a problem of trying to turn on/off a PLL which
was already disabled: ohci-at91 disables PLLB when going to suspend.
The slowclock code however tries to do the same. In that case the
slowclock code just stores and restores a 0 to the PLLB register which
results in the wait_pllblock loop to hang until it reaches the
timeout. This patches fixes the problem by only restoring the
PLLA/PLLB registers when they were != 0.


PS: please CC me, I'm not on the list.

[-- Attachment #2: at91_slowclock_pll_unlock.patch --]
[-- Type: text/x-patch, Size: 1985 bytes --]

at91: when turning off the plls during suspend, don't wait for the lock

flag to be set, instead wait for it to be unset. Previously the code would
always run into the loop limitation of 1000 iterations because the flag is
never set when turning the plls off.

Signed-off-by: Julien Langer <julien.langer@gmail.com>
---

 arch/arm/mach-at91/pm_slowclock.S |   35 ++++++++++++++++++++++++++++++++---
 1 files changed, 32 insertions(+), 3 deletions(-)


diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 987fab3..dc6d730 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -45,7 +45,9 @@
 #define MCKRDY_TIMEOUT		1000
 #define MOSCRDY_TIMEOUT 	1000
 #define PLLALOCK_TIMEOUT	1000
+#define PLLAUNLOCK_TIMEOUT	1000
 #define PLLBLOCK_TIMEOUT	1000
+#define PLLBUNLOCK_TIMEOUT	1000
 
 
 /*
@@ -91,6 +93,20 @@
 	.endm
 
 /*
+ * Wait until PLLA has unlocked.
+ */
+	.macro wait_pllaunlock
+	mov	r4, #PLLAUNLOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKA
+	bne	1b
+2:
+	.endm
+
+/*
  * Wait until PLLB has locked.
  */
 	.macro wait_pllblock
@@ -104,6 +120,20 @@
 2:
 	.endm
 
+/*
+ * Wait until PLLB has unlocked.
+ */
+	.macro wait_pllbunlock
+	mov	r4, #PLLBUNLOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKB
+	bne	1b
+2:
+	.endm
+
 	.text
 
 ENTRY(at91_slow_clock)
@@ -175,7 +205,7 @@ ENTRY(at91_slow_clock)
 	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
 	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
-	wait_pllalock
+	wait_pllaunlock
 
 	/* Save PLLB setting and disable it */
 	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
@@ -183,8 +213,7 @@ ENTRY(at91_slow_clock)
 
 	mov	r3, #AT91_PMC_PLLCOUNT
 	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-
-	wait_pllblock
+	wait_pllbunlock
 
 	/* Turn off the main oscillator */
 	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]

[-- Attachment #3: at91_slowclock_pll_fix.patch --]
[-- Type: text/x-patch, Size: 1989 bytes --]

at91: Don't try to restore the PLL settings when the PLLs were turned off

previously.

We run into this problem with the PLLB on the at91: ohci-at91 disables the PLLB
when going to suspend. The slowclock code however tries to do the same: It
saves the PLLB register value and when restoring the value during resume, it
wait's for the PLLB to lock again. However the PLL will never lock and the loop
would run into it's timeout because the slowclock code just stored and restored
an empty register.
This fixes the problem by only restoring PLLA/PLLB when the registers were != 0.

Signed-off-by: Julien Langer <julien.langer@gmail.com>
---

 arch/arm/mach-at91/pm_slowclock.S |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)


diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index dc6d730..dbc8f0a 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -201,20 +201,28 @@ ENTRY(at91_slow_clock)
 	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 	str	r3, .saved_pllar
 
+	cmp r3, #0
+	beq 3f
+
 	mov	r3, #AT91_PMC_PLLCOUNT
 	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
 	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
 	wait_pllaunlock
 
+3:
 	/* Save PLLB setting and disable it */
 	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 	str	r3, .saved_pllbr
 
+	cmp r3, #0
+	beq 4f
+
 	mov	r3, #AT91_PMC_PLLCOUNT
 	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 	wait_pllbunlock
 
+4:
 	/* Turn off the main oscillator */
 	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
 	bic	r3, r3, #AT91_PMC_MOSCEN
@@ -232,16 +240,22 @@ ENTRY(at91_slow_clock)
 
 	/* Restore PLLB setting */
 	ldr	r3, .saved_pllbr
+	cmp r3, #0
+	beq 5f
 	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 
 	wait_pllblock
 
+5:
 	/* Restore PLLA setting */
 	ldr	r3, .saved_pllar
+	cmp r3, #0
+	beq 6f
 	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
 	wait_pllalock
 
+6:
 #ifdef SLOWDOWN_MASTER_CLOCK
 	/*
 	 * First set PRES if it was not 0,

                 reply	other threads:[~2009-12-01  7:22 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c006aa4b0911302322v769520bbt733dde1451a8e50@mail.gmail.com \
    --to=julien.langer@googlemail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®