Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)

[Paul Menzel <pmenzel@molgen.mpg.de>]

Dear Catherine,


Thank you for your patch.

Am 02.09.26 um 18:04 schrieb Catherine L:
> From: "L, Catherine" <catherine.l@intel.com>

Please use the format without comma: Catherine L.

> $ lsusb
> Bus 003 Device 003: ID 8087:0043 Intel Corp.
> 
> $ cat /sys/kernel/debug/usb/devices
> T:  Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
> D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=8087 ProdID=0043 Rev= 0.00
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> 
> Signed-off-by: L, Catherine <catherine.l@intel.com>

Ditto.

> ---
>   drivers/bluetooth/btusb.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 03039ceaa77d..a4fdf6549127 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
>   	{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
>   	{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
>   	{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
> +	/* Otter Peak2, Wildcat Lake */
> +	{ USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },

Please sort and put the comment on the same line as below.

>   	{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
>   	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
>   	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |


Kind regards,

Paul