Re: [PATCH 06/15] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

[-- Attachment #1: Type: text/plain, Size: 1658 bytes --]

On Fri, 18 Nov 2022, Bartosz Golaszewski wrote:

> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Simplify the conditions in qcom_geni_serial_isr() and fix indentation.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  drivers/tty/serial/qcom_geni_serial.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index dd1491a72deb..22c1869c60f4 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -824,20 +824,18 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
>  
>  	if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN))
>  		qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN,
> -					geni_status & M_GENI_CMD_ACTIVE);
> +					   geni_status & M_GENI_CMD_ACTIVE);
>  
> -	if (s_irq_status & S_GP_IRQ_0_EN || s_irq_status & S_GP_IRQ_1_EN) {
> +	if (s_irq_status & (S_GP_IRQ_0_EN | S_GP_IRQ_1_EN)) {
>  		if (s_irq_status & S_GP_IRQ_0_EN)
>  			uport->icount.parity++;
>  		drop_rx = true;
> -	} else if (s_irq_status & S_GP_IRQ_2_EN ||
> -					s_irq_status & S_GP_IRQ_3_EN) {
> +	} else if (s_irq_status & (S_GP_IRQ_2_EN | S_GP_IRQ_3_EN)) {
>  		uport->icount.brk++;
>  		port->brk = true;
>  	}
>  
> -	if (s_irq_status & S_RX_FIFO_WATERMARK_EN ||
> -					s_irq_status & S_RX_FIFO_LAST_EN)
> +	if (s_irq_status & (S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN))
>  		qcom_geni_serial_handle_rx(uport, drop_rx);
>  
>  out_unlock:
> 

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

-- 
 i.