Re: [PATCH v2 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: Add Sony IMX576 front camera support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/19/26 2:54 PM, Himanshu Bhavani wrote:
> From: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
> 
> Add device tree support for the Sony IMX576 front camera
> sensor and connect it to CAMSS via CSIPHY3.
> 
> Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
> Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
> ---

[...]

>  &cci1_i2c0 {
> -	/* Front cam (Sony IMX576) @ 0x10 */
> +	camera@10 {
> +		compatible = "sony,imx576";
> +		reg = <0x10>;
> +
> +		vana-supply = <&vreg_l3p>;
> +		vif-supply = <&vreg_l6p>;
> +		vdig-supply = <&vreg_32m_cam_dvdd_1p05>;
> +
> +		clocks = <&camcc CAMCC_MCLK1_CLK>;
> +		assigned-clocks = <&camcc CAMCC_MCLK1_CLK>;
> +		assigned-clock-rates = <24000000>;
> +
> +		reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
> +		pinctrl-0 = <&cam_mclk1_default>;
> +		pinctrl-names = "default";
> +
> +		orientation = <0>; /* Front facing */

Please include the new define from:

https://lore.kernel.org/all/20260628-kbingham-orientation-v3-0-4ed92968aff8@ideasonboard.com/
> +		rotation = <90>;
> +
> +		port {
> +			camera_imx576_ep: endpoint {
> +				data-lanes = <1 2 3 4>;
> +				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
> +				link-frequencies = /bits/ 64 <600000000>;
> +				remote-endpoint = <&csiphy3_ep>;
> +			};
> +		};
> +	};
> 
>  	eeprom@50 {
>  		compatible = "giantec,gt24p64a", "atmel,24c64";
> --
> 2.34.1
> 
>