From: Marek Szyprowski <m.szyprowski@samsung.com>
To: Hayes Wang <hayeswang@realtek.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>
Cc: nic_swsd <nic_swsd@realtek.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"pmalani@chromium.org" <pmalani@chromium.org>,
"grundler@chromium.org" <grundler@chromium.org>,
'Linux Samsung SOC' <linux-samsung-soc@vger.kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: Re: [PATCH net-next] r8152: support request_firmware for RTL8153
Date: Wed, 23 Oct 2019 12:22:54 +0200 [thread overview]
Message-ID: <c20abd08-5f22-2cc8-15fa-956d06b5b8af@samsung.com> (raw)
In-Reply-To: <0835B3720019904CB8F7AA43166CEEB2F18ED3FA@RTITMBSVM03.realtek.com.tw>
Hi Hayes,
On 23.10.2019 11:48, Hayes Wang wrote:
> Marek Szyprowski [mailto:m.szyprowski@samsung.com]
>> Sent: Wednesday, October 23, 2019 5:17 PM
>> Subject: Re: [PATCH net-next] r8152: support request_firmware for RTL8153
>>
>> Hi Hayes,
>>
>> On 16.10.2019 05:02, Hayes Wang wrote:
>>> This patch supports loading additional firmware file through
>>> request_firmware().
>>>
>>> A firmware file may include a header followed by several blocks
>>> which have different types of firmware. Currently, the supported
>>> types are RTL_FW_END, RTL_FW_PLA, and RTL_FW_USB.
>>>
>>> The firmware is used to fix some compatible or hardware issues. For
>>> example, the device couldn't be found after rebooting several times.
>>>
>>> The supported chips are
>>> RTL_VER_04 (rtl8153a-2.fw)
>>> RTL_VER_05 (rtl8153a-3.fw)
>>> RTL_VER_06 (rtl8153a-4.fw)
>>> RTL_VER_09 (rtl8153b-2.fw)
>>>
>>> Signed-off-by: Hayes Wang <hayeswang@realtek.com>
>>> Reviewed-by: Prashant Malani <pmalani@chromium.org>
>> This patch (which landed in linux-next last days) causes a following
>> kernel oops on the ARM 32bit Exynos5422 SoC based Odroid XU4 board:
> Please try the following patch.
Yes, this fixes the issue. I've applied those changes manually on top of
Linux next-20191022, due to some differences in the context. When you
prepare a final patch, feel free to add:
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index d3c30ccc8577..283b35a76cf0 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -4000,8 +4000,8 @@ static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
> static void rtl8152_apply_firmware(struct r8152 *tp)
> {
> struct rtl_fw *rtl_fw = &tp->rtl_fw;
> - const struct firmware *fw = rtl_fw->fw;
> - struct fw_header *fw_hdr = (struct fw_header *)fw->data;
> + const struct firmware *fw;
> + struct fw_header *fw_hdr;
> struct fw_phy_patch_key *key;
> u16 key_addr = 0;
> int i;
> @@ -4009,6 +4009,9 @@ static void rtl8152_apply_firmware(struct r8152 *tp)
> if (IS_ERR_OR_NULL(rtl_fw->fw))
> return;
>
> + fw = rtl_fw->fw;
> + fw_hdr = (struct fw_header *)fw->data;
> +
> if (rtl_fw->pre_fw)
> rtl_fw->pre_fw(tp);
>
>>> +static void rtl8152_apply_firmware(struct r8152 *tp)
>>> +{
>>> + struct rtl_fw *rtl_fw = &tp->rtl_fw;
>>> + const struct firmware *fw = rtl_fw->fw;
>>> + struct fw_header *fw_hdr = (struct fw_header *)fw->data;
>>> + int i;
>>> +
>>> + if (IS_ERR_OR_NULL(rtl_fw->fw))
>>> + return;
>>> +
>>> + if (rtl_fw->pre_fw)
>>> + rtl_fw->pre_fw(tp);
>>> +
>>>
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
next prev parent reply other threads:[~2019-10-23 10:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-16 3:02 Hayes Wang
2019-10-16 18:31 ` David Miller
[not found] ` <CGME20191023091648eucas1p12dcc4e9041169e3c7ae43f4ea525dd7f@eucas1p1.samsung.com>
2019-10-23 9:16 ` Marek Szyprowski
2019-10-23 9:48 ` Hayes Wang
2019-10-23 10:22 ` Marek Szyprowski [this message]
2019-10-23 11:52 ` Hayes Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c20abd08-5f22-2cc8-15fa-956d06b5b8af@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=grundler@chromium.org \
--cc=hayeswang@realtek.com \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pmalani@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®