Re: [PATCH v2] ASoC: qcom: sc8280xp: Derive TDM channels from DT mask

[Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>]

> diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
> index 9aae6aadd43d..f5b147962afa 100644
> --- a/sound/soc/qcom/sc8280xp.c
> +++ b/sound/soc/qcom/sc8280xp.c
> @@ -303,6 +303,22 @@ static int sc8280xp_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
>   	channels->min = 2;
>   	channels->max = 2;
>   	switch (cpu_dai->id) {
> +	case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
> +	case AIF_TDM_RX_0 ... AIF_TDM_TX_12: {
> +		struct qcom_snd_tdm_slot_cfg cpu_cfg, codec_cfg;
> +		unsigned int mask;
> +
> +		if (qcom_snd_get_dai_tdm_slots(rtd, &cpu_cfg, &codec_cfg))


qcom_snd_get_dai_tdm_slots() errors are silently ignored here and the channel count falls back to 2.
Could we distinguish the no-TDM-slot case from an actual parsing/configuration error?
This would also make invalid TDM configurations easier to debug.

Thanks,
Prasad

> +			break;
> +
> +		/* Same slot mask selection as q6tdm_set_tdm_slot() */
> +		mask = (cpu_dai->id & 0x1) ? cpu_cfg.tx_mask : cpu_cfg.rx_mask;
> +		if (mask) {
> +			channels->min = hweight32(mask);
> +			channels->max = channels->min;
> +		}
> +		break;
> +	}
>   	case TX_CODEC_DMA_TX_0:
>   	case TX_CODEC_DMA_TX_1:
>   	case TX_CODEC_DMA_TX_2: