Re: [PATCH v3 00/11] Add PCIe support for bcm2712

[Stanimir Varbanov <svarbanov@suse.de>]

On 10/14/24 17:05, Rob Herring (Arm) wrote:
> 
> On Mon, 14 Oct 2024 16:06:59 +0300, Stanimir Varbanov wrote:
>> Hello,
>>
>> Here is v3 the series to add support for PCIe on bcm2712 SoC
>> used by RPi5. Previous v2 can be found at [1].
>>
>> v2 -> v3 changes include:
>>  - Added Reviewed-by/Acked-by tags.
>>  - MIP MSI-X driver has been converted to MSI parent.
>>  - Added a new patch for PHY PLL adjustment need to succesfully
>>    enumerate PCIe endpoints on extension connector (tested with
>>    Pineboards AI Bundle + NVME SSD adapter card).
>>  - Re-introduced brcm,msi-offset DT private property for MIP
>>    interrupt-controller (without it I'm anable to use the interrupts
>>    of adapter cards on PCIe enxtension connector).
>>
>> For more info check patches.
>>
>> [1] https://patchwork.kernel.org/project/linux-pci/cover/20240910151845.17308-1-svarbanov@suse.de/
>>
>> Stanimir Varbanov (11):
>>   dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
>>   dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
>>   irqchip: mip: Add Broadcom bcm2712 MSI-X interrupt controller
>>   PCI: brcmstb: Expand inbound size calculation helper
>>   PCI: brcmstb: Enable external MSI-X if available
>>   PCI: brcmstb: Avoid turn off of bridge reset
>>   PCI: brcmstb: Add bcm2712 support
>>   PCI: brcmstb: Reuse config structure
>>   PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
>>   arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
>>   arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
>>
>>  .../brcm,bcm2712-msix.yaml                    |  60 ++++
>>  .../bindings/pci/brcm,stb-pcie.yaml           |   5 +-
>>  .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     |   8 +
>>  arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 160 +++++++++
>>  drivers/irqchip/Kconfig                       |  16 +
>>  drivers/irqchip/Makefile                      |   1 +
>>  drivers/irqchip/irq-bcm2712-mip.c             | 308 ++++++++++++++++++
>>  drivers/pci/controller/pcie-brcmstb.c         | 197 ++++++++---
>>  8 files changed, 707 insertions(+), 48 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml
>>  create mode 100644 drivers/irqchip/irq-bcm2712-mip.c
>>
>> --
>> 2.43.0
>>
>>
>>
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y broadcom/bcm2712-rpi-5-b.dtb' for 20241014130710.413-1-svarbanov@suse.de:

Sorry about that. I forgot to update brcm,stb-pcie.yaml schema for
number of resets.

~Stan

> 
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@100000: resets: [[12, 42], [13]] is too short
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@100000: reset-names:0: 'rescal' was expected
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@100000: reset-names:1: 'bridge' was expected
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@100000: reset-names: ['bridge', 'rescal'] is too short
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@110000: 'msi-controller' is a required property
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@110000: resets: [[12, 43], [13]] is too short
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@110000: reset-names:0: 'rescal' was expected
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@110000: reset-names:1: 'bridge' was expected
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@110000: reset-names: ['bridge', 'rescal'] is too short
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@120000: 'msi-controller' is a required property
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@120000: resets: [[12, 44], [13]] is too short
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@120000: reset-names:0: 'rescal' was expected
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@120000: reset-names:1: 'bridge' was expected
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@120000: reset-names: ['bridge', 'rescal'] is too short
> 	from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> 
> 
> 
> 
>