Re: [PATCH v4 1/2] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth

[Janaki Ramaiah Thota <quic_janathot@quicinc.com>]

On 11/27/2024 6:38 PM, Bartosz Golaszewski wrote:
> On Wed, Nov 27, 2024 at 2:05 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>>
>> On 27/11/2024 12:51, Janaki Ramaiah Thota wrote:
>>> Add a PMU node for the WCN6750 module present on the qcs6490-rb3gen board
>>> and use the power sequencer for the same.
>>>
>>> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 174 ++++++++++++++++++-
>>>   drivers/bluetooth/hci_qca.c                  |   2 +-
>>>   drivers/power/sequencing/pwrseq-qcom-wcn.c   |  22 +++
>>>   3 files changed, 196 insertions(+), 2 deletions(-)
>>
>> DTS is always separate and cannot go via the same (driver) tree,
>>
>> Missing bindings.
>>
>> Missing changelog, it's v4 so what happened here?
>>
>> Best regards,
>> Krzysztof
> 
> Ah, so this is where the driver change is at.
> 
> Janaki: the DT binding lives under the "regulator" namespace so it's
> Mark Brown who typically takes changes to it via his tree. I pick up
> driver changes into the pwrseq tree. Bjorn takes the DTS changes. Luiz
> and Marcel are responsible for Bluetooth changes so you will have to
> split all these changes into separate commits.
> 
> Bart

Thanks Bartosz, will split the patches and update.

Regards,
Janakiram