Re: [PATCH v2] cpufreq/amd-pstate: Skip auto_sel write when it already matches the mode

[K Prateek Nayak <kprateek.nayak@amd.com>]

Hello Wentao,

On 9/18/2026 12:38 PM, Wentao Guan wrote:
> Since commit 9dfd13f80c85 ("cpufreq/amd-pstate: Toggle auto_sel in active
> mode on shared memory systems"), shmem_init_perf() programs
> AUTONOMOUS_SELECTION_ENABLE unconditionally, including in active mode.
> 
> Platforms that exclusively support autonomous selection report this field
> as an Integer of 1, as required by the ACPI specification, instead of as a
> register descriptor.  cppc_get_reg_val() reads such a field back
> successfully, but cppc_set_reg_val() rejects the write with -EOPNOTSUPP
> because the entry is not an ACPI_TYPE_BUFFER.
> 
> shmem_init_perf() propagates that error, so every amd_pstate_epp_cpu_init()
> fails, cpufreq_register_driver() ends up with an empty policy list and
> returns -ENODEV, and amd-pstate refuses to load at all:
> 
>   amd_pstate: failed to set auto_sel, ret: -95
>   amd_pstate: Failed to initialize CPU 0: -95
>   ...
>   amd_pstate: failed to register with return -19
> 
> Skip the write when the register already holds the value the requested mode
> needs.  Active and guided mode are fixed on these platforms, which report
> auto_sel as 1, while passive mode still fails to load on a platform that
> cannot disable autonomous selection, exactly as it did before the
> offending commit.
> 
> Fixes: 9dfd13f80c85 ("cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems")
> Cc: stable@vger.kernel.org
> Tested-by: LFRon <ronforever@outlook.com>
> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>

You can flip that to:

Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>

You did all the hard work to find, debug, and test it!

> Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
> ---
> changelog v2:
> Accecpt and tested the K Prateek Nayak reviews.
> v1 link:
> https://lore.kernel.org/stable/20260918054808.48999-1-guanwentao@uniontech.com/#R
> ---
> ---
>  drivers/cpufreq/amd-pstate.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 3a6b4b224a66d..91ec44f9fbb96 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -535,6 +535,9 @@ static int shmem_init_perf(struct amd_cpudata *cpudata)
>  		return 0;
>  	}
>  
> +	if ((cppc_state != AMD_PSTATE_PASSIVE) == auto_sel)
> +		return 0;
> +
>  	ret = cppc_set_auto_sel(cpudata->cpu,
>  			(cppc_state == AMD_PSTATE_PASSIVE) ? 0 : 1);

nit. Now that we arrive here only to flip the autosel value,
you can just do:

    cppc_set_auto_sel(cpudata->cpu, !auto_sel)

... and remove that ternary op.

-- 
Thanks and Regards,
Prateek