On Mon, 24 Feb 2025, John Keeping wrote:

> When flushing transmit side DMA, it is the transmit channel that should
> be terminated, not the receive channel.
> 
> Fixes: 9e512eaaf8f40 ("serial: 8250: Fix fifo underflow on flush")
> Reported-by: Wentao Guan <guanwentao@uniontech.com>
> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
> ---
>  drivers/tty/serial/8250/8250_dma.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
> index f245a84f4a508..bdd26c9f34bdf 100644
> --- a/drivers/tty/serial/8250/8250_dma.c
> +++ b/drivers/tty/serial/8250/8250_dma.c
> @@ -162,7 +162,7 @@ void serial8250_tx_dma_flush(struct uart_8250_port *p)
>  	 */
>  	dma->tx_size = 0;
>  
> -	dmaengine_terminate_async(dma->rxchan);
> +	dmaengine_terminate_async(dma->txchan);
>  }
>  
>  int serial8250_rx_dma(struct uart_8250_port *p)
> 

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

-- 
 i.