From: "Zdenek Kabelac" <zdenek.kabelac@gmail.com>
To: "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: BUG: bad unlock balance detected! e1000e
Date: Mon, 8 Dec 2008 12:24:09 +0100 [thread overview]
Message-ID: <c4e36d110812080324y68c0e453qcb68a040da7ac9a2@mail.gmail.com> (raw)
Hi
During occasional scan of message log - I've found out this BUG which
happened on Dec3 with the -rc7 from that day.
(So if it's now fixed in current git feel free to ignore :))
My machine T61 - C2D, 2GB, 64bit kernel - message appeared during
shutdown and was actually not noticed by me...
NetworkManager: <WARN> nm_signal_handler(): Caught signal 15,
shutting down normally.
NetworkManager: <info> (eth0): now unmanaged
NetworkManager: <info> (eth0): device state change: 3 -> 1
NetworkManager: <info> (eth0): cleaning up...
NetworkManager: <info> (eth0): taking down device.
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
NetworkManager/2058 is trying to release lock (nvm_mutex) at:
[<ffffffff8052acb9>] mutex_unlock+0x9/0x10
but there are no more locks to release!
other info that might help us debug this:
1 lock held by NetworkManager/2058:
#0: (rtnl_mutex){--..}, at: [<ffffffff804b09ba>] rtnetlink_rcv+0x1a/0x40
stack backtrace:
Pid: 2058, comm: NetworkManager Not tainted 2.6.28-rc7 #90
Call Trace:
[<ffffffff8026bf6b>] print_unlock_inbalance_bug+0xfb/0x120
[<ffffffff8026db76>] ? mark_held_locks+0x56/0xa0
[<ffffffff802500ba>] ? try_to_del_timer_sync+0x5a/0x70
[<ffffffff8052ce23>] ? _spin_unlock_irqrestore+0x43/0x70
[<ffffffff8026f468>] lock_release_non_nested+0x1a8/0x2a0
[<ffffffff802500ba>] ? try_to_del_timer_sync+0x5a/0x70
[<ffffffff8052acb9>] ? mutex_unlock+0x9/0x10
[<ffffffff8026f61b>] lock_release+0xbb/0x200
[<ffffffff8052abc6>] __mutex_unlock_slowpath+0x86/0x170
[<ffffffff8052acb9>] mutex_unlock+0x9/0x10
[<ffffffffa019cf45>] e1000_release_swflag_ich8lan+0x35/0x40 [e1000e]
[<ffffffffa019de19>] e1000_reset_hw_ich8lan+0xa9/0x130 [e1000e]
[<ffffffffa01ab140>] e1000e_reset+0xf0/0x260 [e1000e]
[<ffffffff802500ea>] ? del_timer_sync+0x1a/0x30
[<ffffffffa01ab4d8>] e1000e_down+0x178/0x180 [e1000e]
[<ffffffffa01ad0b6>] e1000_close+0x26/0xd0 [e1000e]
[<ffffffff804a59b6>] dev_close+0x76/0xc0
[<ffffffff804a7bd6>] dev_change_flags+0x96/0x1e0
[<ffffffff804b1b4c>] do_setlink+0x2ac/0x440
[<ffffffff8052cd46>] ? _read_unlock+0x26/0x30
[<ffffffff804b1ded>] rtnl_setlink+0x10d/0x150
[<ffffffff8052aeb2>] ? mutex_lock_nested+0x1f2/0x300
[<ffffffff804b09ba>] ? rtnetlink_rcv+0x1a/0x40
[<ffffffff804b0b6d>] rtnetlink_rcv_msg+0x18d/0x240
[<ffffffff804b09e0>] ? rtnetlink_rcv_msg+0x0/0x240
[<ffffffff804bba29>] netlink_rcv_skb+0x89/0xb0
[<ffffffff804b09c9>] rtnetlink_rcv+0x29/0x40
[<ffffffff804bb74d>] netlink_unicast+0x2bd/0x2d0
[<ffffffff8049e3ee>] ? __alloc_skb+0x6e/0x150
[<ffffffff804bc6c4>] netlink_sendmsg+0x204/0x2f0
[<ffffffff80499ed8>] ? sock_def_readable+0x68/0x70
[<ffffffff80498077>] sock_sendmsg+0x107/0x130
[<ffffffff8025c690>] ? autoremove_wake_function+0x0/0x40
[<ffffffff80213853>] ? native_sched_clock+0x13/0x60
[<ffffffff802d60e6>] ? fget_light+0x106/0x110
[<ffffffff80497987>] ? move_addr_to_kernel+0x57/0x60
[<ffffffff804a087f>] ? verify_iovec+0x3f/0xe0
[<ffffffff80498229>] sys_sendmsg+0x189/0x320
[<ffffffff8049851d>] ? sys_sendto+0xfd/0x120
[<ffffffff802e6650>] ? d_free+0x50/0x60
[<ffffffff802d6691>] ? __fput+0x171/0x1e0
[<ffffffff8026dda3>] ? trace_hardirqs_on_caller+0x133/0x190
[<ffffffff8028e02f>] ? audit_syscall_entry+0x15f/0x190
[<ffffffff8052c906>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8020c57b>] system_call_fastpath+0x16/0x1b
next reply other threads:[~2008-12-08 11:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-08 11:24 Zdenek Kabelac [this message]
2008-12-09 11:03 ` Frederik Deweerdt
2008-12-09 23:08 ` Andrew Morton
2008-12-09 23:43 ` Frederik Deweerdt
2008-12-09 23:56 ` Andrew Morton
2008-12-11 0:37 ` [E1000-devel] " Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c4e36d110812080324y68c0e453qcb68a040da7ac9a2@mail.gmail.com \
--to=zdenek.kabelac@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®