Re: [PATCH] hwmon: Add driver for NZXT Kraken X and Z series AIO CPU coolers

[Guenter Roeck <linux@roeck-us.net>]

On Mon, Jan 29, 2024 at 12:19:28PM +0100, Aleksa Savic wrote:
> This driver enables hardware monitoring support for NZXT Kraken
> X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers.
> 
> All models expose liquid temperature and pump speed (in RPM), as well as
> PWM control (natively only through a temp-PWM curve, but the driver also
> emulates fixed PWM control on top of that). The Z-series models
> additionally expose the speed and duty of an optionally connected fan,
> with the same PWM control capabilities.
> 
> Pump and fan duty control mode can be set through pwm[1-2]_enable,
> where 1 is for the manual control mode and 2 is for the liquid temp
> to PWM curve mode. Writing a 0 disables control of the channel through
> the driver after setting its duty to 100%. As it is not possible to query
> the device for the active mode, the driver keeps track of it.
> 
> The temperature of the curves relates to the fixed [20-59] C range, per
> device limitations, and correlating to the detected liquid temperature.
> Only PWM values (ranging from 0-255) can be set.
> 
> The addressable RGB LEDs and LCD screen, included only on Z-series models,
> are not supported in this driver.
> 
> Co-developed-by: Jonas Malaco <jonas@protocubo.io>
> Signed-off-by: Jonas Malaco <jonas@protocubo.io>
> Co-developed-by: Yury Zhuravlev <stalkerg@gmail.com>
> Signed-off-by: Yury Zhuravlev <stalkerg@gmail.com>
> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>

Applied.

Thanks,
Guenter