From: Waiman Long <llong@redhat.com>
To: Juri Lelli <juri.lelli@redhat.com>, Waiman Long <llong@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Vincent Guittot <vincent.guittot@linaro.org>,
Dietmar Eggemann <dietmar.eggemann@arm.com>,
Steven Rostedt <rostedt@goodmis.org>,
Ben Segall <bsegall@google.com>, Mel Gorman <mgorman@suse.de>,
Valentin Schneider <vschneid@redhat.com>,
linux-kernel@vger.kernel.org, Phil Auld <pauld@redhat.com>,
Joel Fernandes <joel@joelfernandes.org>
Subject: Re: [PATCH] sched/deadline: Skip overflow check if 0 capacity
Date: Fri, 8 Nov 2024 13:41:52 -0500 [thread overview]
Message-ID: <c4eebfa9-bfea-4ebe-b5d1-de88f1f5cc54@redhat.com> (raw)
In-Reply-To: <Zy48-zbUnjTzxXXB@jlelli-thinkpadt14gen4.remote.csb>
On 11/8/24 11:31 AM, Juri Lelli wrote:
> On 08/11/24 08:39, Waiman Long wrote:
>> On 11/8/24 8:25 AM, Juri Lelli wrote:
>>> On 07/11/24 23:29, Waiman Long wrote:
>>>> By properly setting up a 1-cpu sched domain (partition) with no
>>>> task, it was found that offlining that particular CPU failed because
>>>> dl_bw_check_overflow() in cpuset_cpu_inactive() returned -EBUSY. This
>>>> is due to the fact that dl_bw_capacity() return 0 as the sched domain
>>>> has no active CPU causing a false positive in the overflow check.
>>>>
>>>> Fix this corner case by skipping the __dl_overflow() check in
>>>> dl_bw_manage() when the returned capacity is 0.
>>>>
>>>> Signed-off-by: Waiman Long <longman@redhat.com>
>>>> ---
>>>> kernel/sched/deadline.c | 8 +++++++-
>>>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
>>>> index be1b917dc8ce..0195f350d6d3 100644
>>>> --- a/kernel/sched/deadline.c
>>>> +++ b/kernel/sched/deadline.c
>>>> @@ -3479,7 +3479,13 @@ static int dl_bw_manage(enum dl_bw_request req, int cpu, u64 dl_bw)
>>>> } else {
>>>> unsigned long cap = dl_bw_capacity(cpu);
>>>> - overflow = __dl_overflow(dl_b, cap, 0, dl_bw);
>>>> + /*
>>>> + * In the unlikely case of 0 capacity (e.g. a sched domain
>>>> + * with no active CPUs), skip the overflow check as it will
>>>> + * always return a false positive.
>>>> + */
>>>> + if (likely(cap))
>>>> + overflow = __dl_overflow(dl_b, cap, 0, dl_bw);
>>> The remaining total_bw that make this check fail should be the one
>>> relative to the dl_server on the cpu that is going offline. Wonder if we
>>> shouldn't rather clean that up (remove dl_server contribution) before we
>>> get to this point during an hotplug operation. Need to think about it a
>>> little more.
>> static inline bool
>> __dl_overflow(struct dl_bw *dl_b, unsigned long cap, u64 old_bw, u64 new_bw)
>> {
>> return dl_b->bw != -1 &&
>> cap_scale(dl_b->bw, cap) < dl_b->total_bw - old_bw + new_bw;
>> }
>>
>> With a 0 cap, cap_scale(dl_b->bw, cap) will always be 0. As long as total_bw
>> isn't 0 and bw isn't -1, the condition will be true.
> Right, but I fear that by hiding the special corner case we would also
> miss the cases where we have DEADLINE tasks with bandwidth on that
> single CPU and then ignore it.
>
> So, maybe something like the below?
>
> ---
> kernel/sched/deadline.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
> index be1b917dc8ce..7884e566557c 100644
> --- a/kernel/sched/deadline.c
> +++ b/kernel/sched/deadline.c
> @@ -130,11 +130,24 @@ static inline int dl_bw_cpus(int i)
> if (cpumask_subset(rd->span, cpu_active_mask))
> return cpumask_weight(rd->span);
>
> + /*
> + * Hotplug extreme case in which the last remaining online CPU in a
> + * root domain is going offline. We get here after that cpus has been
> + * cleared from cpu_active_mask, so the loop below would return 0
> + * CPUs, which of course doesn't make much sense. Return at least 1
> + * CPU.
> + */
> +
> + if (cpumask_weight(rd->span) == 1)
> + return 1;
> +
> cpus = 0;
>
> for_each_cpu_and(i, rd->span, cpu_active_mask)
> cpus++;
>
> + WARN_ON(!cpus);
> +
> return cpus;
> }
> ---
This patch looks good to me.
With this patch and my cpuset patches applied, the test_cpuset_prs.sh
test passed without any error. You can add the following tags if you
send this patch out.
Reported-by: Waiman Long <longman@redhat.com>
Tested-by: Waiman Long <longman@redhat.com
> That said though, I believe I just found an additional issue. With the
> above the system doesn't crash (it did w/o it), but happily moves
> DEADLINE tasks out of a domain with a single CPU going offline. Last
> time I looked at this we were properly checking and failing the hotplug
> operation, but it was indeed a while ago, so not sure yet what changed.
> More staring.
>
> Oh, so broken, yay. :)
The cpuset code will move tasks in a partition with no effective CPUs to
its parent.
Cheers,
Longman
next prev parent reply other threads:[~2024-11-08 18:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-08 4:29 Waiman Long
2024-11-08 13:25 ` Juri Lelli
2024-11-08 13:39 ` Waiman Long
2024-11-08 16:31 ` Juri Lelli
2024-11-08 18:41 ` Waiman Long [this message]
2024-11-08 18:47 ` Waiman Long
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c4eebfa9-bfea-4ebe-b5d1-de88f1f5cc54@redhat.com \
--to=llong@redhat.com \
--cc=bsegall@google.com \
--cc=dietmar.eggemann@arm.com \
--cc=joel@joelfernandes.org \
--cc=juri.lelli@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=mingo@redhat.com \
--cc=pauld@redhat.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=vincent.guittot@linaro.org \
--cc=vschneid@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®