From: Heiner Kallweit <hkallweit1@gmail.com>
To: javen <javen_xu@realsil.com.cn>,
nic_swsd@realtek.com, andrew+netdev@lunn.ch, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
horms@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [Patch net-next v6 3/7] r8169: add support for new interrupt mapping
Date: Tue, 2 Jun 2026 23:23:05 +0200 [thread overview]
Message-ID: <c52f0c89-b47c-4e24-bed1-6ee95bb31053@gmail.com> (raw)
In-Reply-To: <20260526081117.173-4-javen_xu@realsil.com.cn>
On 26.05.2026 10:11, javen wrote:
> From: Javen Xu <javen_xu@realsil.com.cn>
>
> To support RSS, the number of hardware interrupt bits should match the
> interrupt of software. So we add support for new interrupt mapping here.
> ISR_VER_MAP_REG is the hardware register to indicate interrupt status.
> IMR_SET_VEC_MAP_REG is interrupt mask which is set to enable irq.
>
> Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
> ---
> Changes in v2:
> - no changes
>
> Changes in v3:
> - init index in napi_struct and get message_id from index
> - move rtl8169_disable_hw_interrupt_msix directly before the call to
> napi_schedule()
> - change the condition in rtl8169_request_irq when RTL_VEC_MAP_ENABLE
> enabled, use rtl8169_interrupt_msix
>
> Changes in v4:
> - remove flag tp->feature, replace tp->features & RTL_VEC_MAP_ENABLE
> with tp->irq_nvecs > 1, they are equivalent.
> - follow reverse xmas tree, in rtl8169_interrupt_msix(),
> rtl8169_poll_msix_rx(), rtl8169_poll_msix_tx(),
> rtl8169_poll_msix_other()
> - use napi->index in rtl8169_poll_msix_other()
> - add a comment to describe RTL8127 MSI-X vector layout
> - simplify r8169_init_napi()
>
> Changes in v5:
> - replace magic number in rtl8169_poll_msix_tx()
>
> Changes in v6:
> - when irq_nvecs <= 1, use register IntrMask_8125, else using vec map
> - fix irq sequence in rtl8169_interrupt_msix(), disable interrupts
> before clean it
> - remove dead code in rtl8169_poll_msix_tx()
> ---
> drivers/net/ethernet/realtek/r8169_main.c | 166 +++++++++++++++++++---
> 1 file changed, 150 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 62bf77aa1ec8..951d2046a81b 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -79,6 +79,7 @@
> #define R8169_TX_START_THRS (2 * R8169_TX_STOP_THRS)
> #define R8169_MAX_RX_QUEUES 8
> #define R8127_MAX_RX_QUEUES 8
> +#define R8127_MAX_TX_QUEUES 8
> #define R8169_DEFAULT_RX_QUEUES 1
> #define R8169_MAX_TX_QUEUES 1
>
> @@ -449,8 +450,12 @@ enum rtl8125_registers {
> RSS_CTRL_8125 = 0x4500,
> Q_NUM_CTRL_8125 = 0x4800,
> EEE_TXIDLE_TIMER_8125 = 0x6048,
> + IMR_CLEAR_VEC_MAP_REG = 0x0d00,
> + ISR_VEC_MAP_REG = 0x0d04,
> + IMR_SET_VEC_MAP_REG = 0x0d0c,
> };
>
> +#define MSIX_ID_VEC_MAP_LINKCHG 29
> #define LEDSEL_MASK_8125 0x23f
>
> #define RX_VLAN_INNER_8125 BIT(22)
> @@ -581,6 +586,9 @@ enum rtl_register_content {
>
> /* magic enable v2 */
> MagicPacket_v2 = (1 << 16), /* Wake up when receives a Magic Packet */
> +#define ISRIMR_LINKCHG BIT(29)
> +#define ISRIMR_TOK_Q0 BIT(8)
> +#define ISRIMR_ROK_Q0 BIT(0)
> };
>
> enum rtl_desc_bit {
> @@ -1664,26 +1672,38 @@ static u32 rtl_get_events(struct rtl8169_private *tp)
>
> static void rtl_ack_events(struct rtl8169_private *tp, u32 bits)
> {
> - if (rtl_is_8125(tp))
> - RTL_W32(tp, IntrStatus_8125, bits);
> - else
> + if (rtl_is_8125(tp)) {
> + if (tp->irq_nvecs > 1)
> + RTL_W32(tp, ISR_VEC_MAP_REG, bits);
> + else
> + RTL_W32(tp, IntrStatus_8125, bits);
> + } else {
> RTL_W16(tp, IntrStatus, bits);
> + }
> }
>
> static void rtl_irq_disable(struct rtl8169_private *tp)
> {
> - if (rtl_is_8125(tp))
> - RTL_W32(tp, IntrMask_8125, 0);
> - else
> + if (rtl_is_8125(tp)) {
> + if (tp->irq_nvecs > 1)
> + RTL_W32(tp, IMR_CLEAR_VEC_MAP_REG, 0xffffffff);
> + else
> + RTL_W32(tp, IntrMask_8125, 0);
> + } else {
> RTL_W16(tp, IntrMask, 0);
> + }
> }
>
> static void rtl_irq_enable(struct rtl8169_private *tp)
> {
> - if (rtl_is_8125(tp))
> - RTL_W32(tp, IntrMask_8125, tp->irq_mask);
> - else
> + if (rtl_is_8125(tp)) {
> + if (tp->irq_nvecs > 1)
> + RTL_W32(tp, IMR_SET_VEC_MAP_REG, tp->irq_mask);
> + else
> + RTL_W32(tp, IntrMask_8125, tp->irq_mask);
> + } else {
> RTL_W16(tp, IntrMask, tp->irq_mask);
> + }
> }
>
> static void rtl8169_irq_mask_and_ack(struct rtl8169_private *tp)
> @@ -5062,6 +5082,45 @@ static void rtl8169_free_irq(struct rtl8169_private *tp)
> }
> }
>
> +static void rtl8169_disable_hw_interrupt_msix(struct rtl8169_private *tp, int message_id)
> +{
> + RTL_W32(tp, IMR_CLEAR_VEC_MAP_REG, BIT(message_id));
> +}
> +
> +static void rtl8169_clear_hw_isr(struct rtl8169_private *tp, int message_id)
> +{
> + RTL_W32(tp, ISR_VEC_MAP_REG, BIT(message_id));
> +}
> +
> +static void rtl8169_enable_hw_interrupt_msix(struct rtl8169_private *tp, int message_id)
> +{
> + RTL_W32(tp, IMR_SET_VEC_MAP_REG, BIT(message_id));
> +}
> +
> +static irqreturn_t rtl8169_interrupt_msix(int irq, void *dev_instance)
> +{
> + struct napi_struct *napi = dev_instance;
> + struct net_device *dev = napi->dev;
> + int message_id = napi->index;
> + struct rtl8169_private *tp;
> +
> + tp = netdev_priv(dev);
> +
> + if (message_id == MSIX_ID_VEC_MAP_LINKCHG) {
> + rtl8169_clear_hw_isr(tp, message_id);
> + phy_mac_interrupt(tp->phydev);
> + return IRQ_HANDLED;
> + }
> +
> + rtl8169_disable_hw_interrupt_msix(tp, message_id);
> + rtl8169_clear_hw_isr(tp, message_id);
> +
> + tp->recheck_desc_ownbit = true;
> + napi_schedule(napi);
> +
> + return IRQ_HANDLED;
> +}
> +
> static int rtl8169_request_irq(struct rtl8169_private *tp)
> {
> struct net_device *dev = tp->dev;
> @@ -5070,8 +5129,12 @@ static int rtl8169_request_irq(struct rtl8169_private *tp)
>
> for (i = 0; i < tp->irq_nvecs; i++) {
> napi = &tp->rtl8169_napi[i];
> - rc = pci_request_irq(tp->pci_dev, i, rtl8169_interrupt,
> - NULL, napi, "%s-%d", dev->name, i);
> + if (tp->irq_nvecs > 1)
> + rc = pci_request_irq(tp->pci_dev, i, rtl8169_interrupt_msix,
> + NULL, napi, "%s-%d", dev->name, i);
> + else
> + rc = pci_request_irq(tp->pci_dev, i, rtl8169_interrupt,
> + NULL, napi, "%s-%d", dev->name, i);
> if (rc)
> goto free_irq;
> }
> @@ -5517,10 +5580,16 @@ static const struct net_device_ops rtl_netdev_ops = {
>
> static void rtl_set_irq_mask(struct rtl8169_private *tp)
> {
> - tp->irq_mask = RxOK | RxErr | TxOK | TxErr | LinkChg;
> + if (tp->irq_nvecs > 1) {
> + tp->irq_mask = ISRIMR_LINKCHG | ISRIMR_TOK_Q0;
> + for (int i = 0; i < tp->num_rx_rings; i++)
> + tp->irq_mask |= ISRIMR_ROK_Q0 << i;
> + } else {
> + tp->irq_mask = RxOK | RxErr | TxOK | TxErr | LinkChg;
>
> - if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
> - tp->irq_mask |= SYSErr | RxFIFOOver;
> + if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
> + tp->irq_mask |= SYSErr | RxFIFOOver;
> + }
> }
>
> static int rtl_alloc_irq(struct rtl8169_private *tp)
> @@ -5825,10 +5894,75 @@ static void r8169_del_napi_action(void *data)
> netif_napi_del(&tp->rtl8169_napi[i]);
> }
>
> +static int rtl8169_poll_msix_rx(struct napi_struct *napi, int budget)
> +{
> + struct net_device *dev = napi->dev;
> + const int message_id = napi->index;
> + struct rtl8169_private *tp;
> + int work_done = 0;
> +
> + tp = netdev_priv(dev);
> +
> + if (message_id < tp->num_rx_rings)
> + work_done += rtl_rx(dev, tp, &tp->rx_ring[message_id], budget);
> +
> + if (work_done < budget && napi_complete_done(napi, work_done))
> + rtl8169_enable_hw_interrupt_msix(tp, message_id);
> +
> + return work_done;
> +}
> +
> +static int rtl8169_poll_msix_tx(struct napi_struct *napi, int budget)
> +{
> + struct net_device *dev = napi->dev;
> + const int message_id = napi->index;
> + struct rtl8169_private *tp;
> +
> + tp = netdev_priv(dev);
> +
> + rtl_tx(dev, tp, budget);
> +
> + if (napi_complete_done(napi, 0))
> + rtl8169_enable_hw_interrupt_msix(tp, message_id);
> +
> + return 0;
> +}
> +
> +static int rtl8169_poll_msix_other(struct napi_struct *napi, int budget)
> +{
> + struct net_device *dev = napi->dev;
> + const int message_id = napi->index;
This variable is used only once, I don't really see a benefit.
> + struct rtl8169_private *tp;
> +
> + tp = netdev_priv(dev);
> +
> + if (napi_complete_done(napi, 0))
> + rtl8169_enable_hw_interrupt_msix(tp, message_id);
> +
> + return 0;
> +}
> +
> +/* RTL8127 MSI-X vector layout:
> + * Vectors 0 .. (RxQs - 1) : Rx Queues
> + * Vectors RxQs .. (RxQs + TxQs - 1) : Tx Queues
> + * Vector (RxQs + TxQs) and up : Other events (Link status(29), etc.)
> + */
> static void r8169_init_napi(struct rtl8169_private *tp)
> {
> - for (int i = 0; i < tp->irq_nvecs; i++)
> - netif_napi_add(tp->dev, &tp->rtl8169_napi[i], rtl8169_poll);
> + for (int i = 0; i < tp->irq_nvecs; i++) {
> + int (*poll_fn)(struct napi_struct *, int) = rtl8169_poll;
> +
> + if (tp->irq_nvecs > 1) {
> + if (i < R8127_MAX_RX_QUEUES)
> + poll_fn = rtl8169_poll_msix_rx;
> + else if (i < R8127_MAX_RX_QUEUES + R8127_MAX_TX_QUEUES)
> + poll_fn = rtl8169_poll_msix_tx;
> + else
> + poll_fn = rtl8169_poll_msix_other;
> + }
> + netif_napi_add(tp->dev, &tp->rtl8169_napi[i], poll_fn);
> + tp->rtl8169_napi[i].index = i;
> + }
> devm_add_action_or_reset(&tp->pci_dev->dev, r8169_del_napi_action, tp);
> }
>
next prev parent reply other threads:[~2026-06-02 21:23 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-26 8:11 [Patch net-next v6 0/7] r8169: add RSS support for RTL8127 javen
2026-05-26 8:11 ` [Patch net-next v6 1/7] r8169: add support for multi irqs javen
2026-05-29 1:00 ` Jakub Kicinski
2026-05-29 5:43 ` Javen
2026-05-29 18:07 ` Jakub Kicinski
2026-06-02 21:22 ` Heiner Kallweit
2026-05-26 8:11 ` [Patch net-next v6 2/7] r8169: add support for multi rx queues javen
2026-05-29 1:04 ` Jakub Kicinski
2026-05-29 6:47 ` Javen
2026-05-29 18:07 ` Jakub Kicinski
2026-05-26 8:11 ` [Patch net-next v6 3/7] r8169: add support for new interrupt mapping javen
2026-06-02 21:23 ` Heiner Kallweit [this message]
2026-05-26 8:11 ` [Patch net-next v6 4/7] r8169: enable " javen
2026-05-26 8:11 ` [Patch net-next v6 5/7] r8169: add support and enable rss javen
2026-06-02 21:23 ` Heiner Kallweit
2026-05-26 8:11 ` [Patch net-next v6 6/7] r8169: move struct ethtool_ops javen
2026-05-26 8:11 ` [Patch net-next v6 7/7] r8169: support setting rx queue numbers via ethtool javen
2026-06-01 2:14 ` [Patch net-next v6 0/7] r8169: add RSS support for RTL8127 Javen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c52f0c89-b47c-4e24-bed1-6ee95bb31053@gmail.com \
--to=hkallweit1@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=javen_xu@realsil.com.cn \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome