Re: [PATCH] spi: uniphier: Simplify clock handling with devm_clk_get_enabled()

[Kunihiko Hayashi <hayashi.kunihiko@socionext.com>]

Hi,

On 2026/04/07 16:30, Pei Xiao wrote:
> Replace devm_clk_get() followed by clk_prepare_enable() with
> devm_clk_get_enabled() for the clock. This removes the need for
> explicit clock enable and disable calls, as the managed API automatically
> handles clock disabling on device removal or probe failure.
> 
> Remove the now-unnecessary clk_disable_unprepare() calls from the probe
> error path and the remove callback. Adjust error labels accordingly.
> 
> Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
> ---
>   drivers/spi/spi-uniphier.c | 18 ++++--------------
>   1 file changed, 4 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
> index 9e1d364a6198..1b815ee2ed1b 100644
> --- a/drivers/spi/spi-uniphier.c
> +++ b/drivers/spi/spi-uniphier.c
> @@ -666,28 +666,24 @@ static int uniphier_spi_probe(struct platform_device
> *pdev)
>   	}
>   	priv->base_dma_addr = res->start;
>   
> -	priv->clk = devm_clk_get(&pdev->dev, NULL);
> +	priv->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>   	if (IS_ERR(priv->clk)) {
>   		dev_err(&pdev->dev, "failed to get clock\n");
>   		ret = PTR_ERR(priv->clk);
>   		goto out_host_put;
>   	}
>   
> -	ret = clk_prepare_enable(priv->clk);
> -	if (ret)
> -		goto out_host_put;
> -
>   	irq = platform_get_irq(pdev, 0);
>   	if (irq < 0) {
>   		ret = irq;
> -		goto out_disable_clk;
> +		goto out_host_put;
>   	}
>   
>   	ret = devm_request_irq(&pdev->dev, irq, uniphier_spi_handler,
>   			       0, "uniphier-spi", priv);
>   	if (ret) {
>   		dev_err(&pdev->dev, "failed to request IRQ\n");
> -		goto out_disable_clk;
> +		goto out_host_put;
>   	}
>   
>   	init_completion(&priv->xfer_done);
> @@ -716,7 +712,7 @@ static int uniphier_spi_probe(struct platform_device
> *pdev)
>   	if (IS_ERR_OR_NULL(host->dma_tx)) {
>   		if (PTR_ERR(host->dma_tx) == -EPROBE_DEFER) {
>   			ret = -EPROBE_DEFER;
> -			goto out_disable_clk;
> +			goto out_host_put;
>   		}
>   		host->dma_tx = NULL;
>   		dma_tx_burst = INT_MAX;
> @@ -766,9 +762,6 @@ static int uniphier_spi_probe(struct platform_device
> *pdev)
>   		host->dma_tx = NULL;
>   	}
>   
> -out_disable_clk:
> -	clk_disable_unprepare(priv->clk);
> -
>   out_host_put:
>   	spi_controller_put(host);
>   	return ret;
> @@ -777,14 +770,11 @@ static int uniphier_spi_probe(struct platform_device
> *pdev)
>   static void uniphier_spi_remove(struct platform_device *pdev)
>   {
>   	struct spi_controller *host = platform_get_drvdata(pdev);
> -	struct uniphier_spi_priv *priv = spi_controller_get_devdata(host);
>   
>   	if (host->dma_tx)
>   		dma_release_channel(host->dma_tx);
>   	if (host->dma_rx)
>   		dma_release_channel(host->dma_rx);
> -
> -	clk_disable_unprepare(priv->clk);
>   }
>   
>   static const struct of_device_id uniphier_spi_match[] = {

Looks good to me.

Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

Thank you,

---
Best Regards
Kunihiko Hayashi