Re: [PATCH v2 1/4] dt-bindings: iio: adc: ad7192: Add properties

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 14/11/2023 21:05, Alisa-Dariana Roman wrote:
> Document properties used for clock configuration.

Some background here is missing - otherwise it looks like you are adding
new properties...

> 
> Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
> ---
>  .../devicetree/bindings/iio/adc/adi,ad7192.yaml        | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> index 16def2985ab4..9b59d6eea368 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> @@ -80,6 +80,16 @@ properties:
>        and when chop is disabled.
>      type: boolean
>  
> +  adi,clock-xtal:
> +    description: |
> +      External crystal connected from MCLK1 to MCLK2.

And this should be input clock.

> +    type: boolean
> +
> +  adi,int-clock-output-enable:
> +    description: |
> +      Internal 4.92 MHz clock available on MCLK2 pin.
> +    type: boolean

This should be clock-cells and clock provider.

Unless you are just documenting already used interface which you do not
want to break...

> +
>    bipolar:
>      description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
>      type: boolean

Best regards,
Krzysztof