From: Claudiu Manoil <claudiu.manoil@nxp.com>
To: netdev@vger.kernel.org
Cc: s32@nxp.com, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 3/5] arm64: dts: s32n79: add NETC IEP18 ECAM node for ENETC PPM ports
Date: Tue, 3 Nov 2026 16:09:09 +0200 [thread overview]
Message-ID: <c76cf39edbce4e576aa7a3fe1544767fc7026f96.1793712309.git.claudiu.manoil@nxp.com> (raw)
In-Reply-To: <cover.1793712309.git.claudiu.manoil@nxp.com>
Add the netc_iep18 PCIe ECAM host node describing the NETC integrated
endpoint bus allocated to the first Linux cohort on S32N79. The bus is
enumerated via the generic pci-host-ecam-generic driver and hosts the
ENETC v4 Pseudo-MAC (PPM) PF and its VFs, which connect internally to
the on-chip NETC switch (not owned by Linux).
The node is kept disabled at the SoC level; boards that wire up NETC
enable it. MSIs are routed through the GIC-v3 ITS (msi-map) and DMA is
translated by the SMMUv3 (iommu-map).
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
---
v3: none
v2:
- Replaced the 'msi-parent' stub property with 'msi-map', as per H/W spec.
arch/arm64/boot/dts/freescale/s32n79.dtsi | 24 +++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/s32n79.dtsi b/arch/arm64/boot/dts/freescale/s32n79.dtsi
index 94ab58783fdc8..65cf65e828328 100644
--- a/arch/arm64/boot/dts/freescale/s32n79.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32n79.dtsi
@@ -122,6 +122,30 @@ irqsteer_coss: interrupt-controller@4ed00000 {
};
};
+ nwss-bus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x48800000 0x0 0x48800000 0x0 0x4b0000>,
+ <0x2 0x40000000 0x2 0x40000000 0x0 0x20000000>;
+
+ netc_iep18: pcie@241200000 {
+ compatible = "pci-host-ecam-generic";
+ reg = <0x2 0x41200000 0x0 0x100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x0 0x0>;
+ iommu-map = <0x0 &smmu 0xc0000 0x100>;
+ msi-map = <0x0 &its 0xc0000 0x100>;
+ dma-coherent;
+ status = "disabled";
+
+ /* All NETC PCIe functions */
+ ranges = <0x82000000 0x0 0x48800000 0x0 0x48800000 0x0 0x4b0000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
next prev parent reply other threads:[~2026-11-03 14:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1793712309.git.claudiu.manoil@nxp.com>
2026-11-03 14:09 ` [PATCH net-next v3 1/5] net: enetc: Add pseudo-MAC support for ENETCv4 Ports via a fixed-link node Claudiu Manoil
2026-11-03 14:09 ` [PATCH net-next v3 2/5] net: enetc: Enable probing of version 4.4 devices Claudiu Manoil
2026-11-09 17:37 ` Simon Horman
2026-11-11 8:55 ` Claudiu Manoil
2026-11-03 14:09 ` Claudiu Manoil [this message]
2026-11-03 14:09 ` [PATCH net-next v3 4/5] arm64: dts: s32n79-rdb: enable NETC IEP18 Claudiu Manoil
2026-11-03 14:09 ` [PATCH net-next v3 5/5] PCI: Create OF node for NXP ENETC pseudo-MAC functions Claudiu Manoil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c76cf39edbce4e576aa7a3fe1544767fc7026f96.1793712309.git.claudiu.manoil@nxp.com \
--to=claudiu.manoil@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®