From: "Oskari Lemmelä" <oskari@lemmela.net>
To: Lee Jones <lee.jones@linaro.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
Quentin Schulz <quentin.schulz@bootlin.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 1/2] mfd: axp20x: Re-align mfd cell entries
Date: Mon, 10 Dec 2018 08:55:47 +0200 [thread overview]
Message-ID: <c77951e6-46d9-d48a-b5bb-33bb9d00a929@lemmela.net> (raw)
In-Reply-To: <20181210063642.GT26661@dell>
Hi Lee,
On 10.12.2018 8.36, Lee Jones wrote:
> On Sat, 08 Dec 2018, Oskari Lemmela wrote:
>
>> From: Chen-Yu Tsai <wens@csie.org>
>>
>> In the axp20x driver, the various mfd_cell lists had varying amounts
>> of indentation, sometimes even within the same list. For the axp288,
>> there's no alignment at all.
>>
>> Re-align the right hand side of the assignments with the least amount
>> of tabs possible. Also collapse the closing bracket and the opening
>> bracket of the next entry onto the same line for the axp288, to be
>> consistent with all the other mfd_cell lists.
>>
>> This patch is whitespace change only. No functionality is modified.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
> Why is Oskari Lemmela's SoB here?
>
> You both authored this alignment patch?
I picked up Chen-Yu's patch from
https://github.com/wens/linux/commit/b99cec26bae2835a0374463570ea9ea26b034afa.
I should have mentioned it cover letter.
Chen-Yu is correct author. I'm just sending his patch.
>
>> ---
>> drivers/mfd/axp20x.c | 107 +++++++++++++++++++++----------------------
>> 1 file changed, 51 insertions(+), 56 deletions(-)
>>
>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>> index dfc3cff1d08b..8037b4e01ed6 100644
>> --- a/drivers/mfd/axp20x.c
>> +++ b/drivers/mfd/axp20x.c
>> @@ -640,9 +640,9 @@ static const struct mfd_cell axp221_cells[] = {
>>
>> static const struct mfd_cell axp223_cells[] = {
>> {
>> - .name = "axp221-pek",
>> - .num_resources = ARRAY_SIZE(axp22x_pek_resources),
>> - .resources = axp22x_pek_resources,
>> + .name = "axp221-pek",
>> + .num_resources = ARRAY_SIZE(axp22x_pek_resources),
>> + .resources = axp22x_pek_resources,
>> }, {
>> .name = "axp22x-adc",
>> .of_compatible = "x-powers,axp221-adc",
>> @@ -650,7 +650,7 @@ static const struct mfd_cell axp223_cells[] = {
>> .name = "axp20x-battery-power-supply",
>> .of_compatible = "x-powers,axp221-battery-power-supply",
>> }, {
>> - .name = "axp20x-regulator",
>> + .name = "axp20x-regulator",
>> }, {
>> .name = "axp20x-ac-power-supply",
>> .of_compatible = "x-powers,axp221-ac-power-supply",
>> @@ -666,9 +666,9 @@ static const struct mfd_cell axp223_cells[] = {
>>
>> static const struct mfd_cell axp152_cells[] = {
>> {
>> - .name = "axp20x-pek",
>> - .num_resources = ARRAY_SIZE(axp152_pek_resources),
>> - .resources = axp152_pek_resources,
>> + .name = "axp20x-pek",
>> + .num_resources = ARRAY_SIZE(axp152_pek_resources),
>> + .resources = axp152_pek_resources,
>> },
>> };
>>
>> @@ -697,84 +697,79 @@ static const struct resource axp288_charger_resources[] = {
>>
>> static const struct mfd_cell axp288_cells[] = {
>> {
>> - .name = "axp288_adc",
>> - .num_resources = ARRAY_SIZE(axp288_adc_resources),
>> - .resources = axp288_adc_resources,
>> - },
>> - {
>> - .name = "axp288_extcon",
>> - .num_resources = ARRAY_SIZE(axp288_extcon_resources),
>> - .resources = axp288_extcon_resources,
>> - },
>> - {
>> - .name = "axp288_charger",
>> - .num_resources = ARRAY_SIZE(axp288_charger_resources),
>> - .resources = axp288_charger_resources,
>> - },
>> - {
>> - .name = "axp288_fuel_gauge",
>> - .num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources),
>> - .resources = axp288_fuel_gauge_resources,
>> - },
>> - {
>> - .name = "axp221-pek",
>> - .num_resources = ARRAY_SIZE(axp288_power_button_resources),
>> - .resources = axp288_power_button_resources,
>> - },
>> - {
>> - .name = "axp288_pmic_acpi",
>> + .name = "axp288_adc",
>> + .num_resources = ARRAY_SIZE(axp288_adc_resources),
>> + .resources = axp288_adc_resources,
>> + }, {
>> + .name = "axp288_extcon",
>> + .num_resources = ARRAY_SIZE(axp288_extcon_resources),
>> + .resources = axp288_extcon_resources,
>> + }, {
>> + .name = "axp288_charger",
>> + .num_resources = ARRAY_SIZE(axp288_charger_resources),
>> + .resources = axp288_charger_resources,
>> + }, {
>> + .name = "axp288_fuel_gauge",
>> + .num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources),
>> + .resources = axp288_fuel_gauge_resources,
>> + }, {
>> + .name = "axp221-pek",
>> + .num_resources = ARRAY_SIZE(axp288_power_button_resources),
>> + .resources = axp288_power_button_resources,
>> + }, {
>> + .name = "axp288_pmic_acpi",
>> },
>> };
>>
>> static const struct mfd_cell axp803_cells[] = {
>> {
>> - .name = "axp221-pek",
>> - .num_resources = ARRAY_SIZE(axp803_pek_resources),
>> - .resources = axp803_pek_resources,
>> + .name = "axp221-pek",
>> + .num_resources = ARRAY_SIZE(axp803_pek_resources),
>> + .resources = axp803_pek_resources,
>> },
>> - { .name = "axp20x-regulator" },
>> + { .name = "axp20x-regulator" },
>> };
>>
>> static const struct mfd_cell axp806_self_working_cells[] = {
>> {
>> - .name = "axp221-pek",
>> - .num_resources = ARRAY_SIZE(axp806_pek_resources),
>> - .resources = axp806_pek_resources,
>> + .name = "axp221-pek",
>> + .num_resources = ARRAY_SIZE(axp806_pek_resources),
>> + .resources = axp806_pek_resources,
>> },
>> - { .name = "axp20x-regulator" },
>> + { .name = "axp20x-regulator" },
>> };
>>
>> static const struct mfd_cell axp806_cells[] = {
>> {
>> - .id = 2,
>> - .name = "axp20x-regulator",
>> + .id = 2,
>> + .name = "axp20x-regulator",
>> },
>> };
>>
>> static const struct mfd_cell axp809_cells[] = {
>> {
>> - .name = "axp221-pek",
>> - .num_resources = ARRAY_SIZE(axp809_pek_resources),
>> - .resources = axp809_pek_resources,
>> + .name = "axp221-pek",
>> + .num_resources = ARRAY_SIZE(axp809_pek_resources),
>> + .resources = axp809_pek_resources,
>> }, {
>> - .id = 1,
>> - .name = "axp20x-regulator",
>> + .id = 1,
>> + .name = "axp20x-regulator",
>> },
>> };
>>
>> static const struct mfd_cell axp813_cells[] = {
>> {
>> - .name = "axp221-pek",
>> - .num_resources = ARRAY_SIZE(axp803_pek_resources),
>> - .resources = axp803_pek_resources,
>> + .name = "axp221-pek",
>> + .num_resources = ARRAY_SIZE(axp803_pek_resources),
>> + .resources = axp803_pek_resources,
>> }, {
>> - .name = "axp20x-regulator",
>> + .name = "axp20x-regulator",
>> }, {
>> - .name = "axp20x-gpio",
>> - .of_compatible = "x-powers,axp813-gpio",
>> + .name = "axp20x-gpio",
>> + .of_compatible = "x-powers,axp813-gpio",
>> }, {
>> - .name = "axp813-adc",
>> - .of_compatible = "x-powers,axp813-adc",
>> + .name = "axp813-adc",
>> + .of_compatible = "x-powers,axp813-adc",
>> }, {
>> .name = "axp20x-battery-power-supply",
>> .of_compatible = "x-powers,axp813-battery-power-supply",
Thanks,
Oskari
next prev parent reply other threads:[~2018-12-10 6:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-08 17:58 [PATCH v8 0/2] AXP8x3 AC and battery power supply support Oskari Lemmela
2018-12-08 17:58 ` [PATCH v8 1/2] mfd: axp20x: Re-align mfd cell entries Oskari Lemmela
2018-12-10 6:32 ` Lee Jones
2018-12-10 6:36 ` Lee Jones
2018-12-10 6:55 ` Oskari Lemmelä [this message]
2018-12-10 7:05 ` Lee Jones
2018-12-08 17:58 ` [PATCH v8 2/2] mfd: axp20x: Add supported cells for AXP803 Oskari Lemmela
2018-12-10 6:32 ` Lee Jones
2018-12-10 6:35 ` Lee Jones
2018-12-10 6:41 ` Chen-Yu Tsai
2018-12-10 7:04 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c77951e6-46d9-d48a-b5bb-33bb9d00a929@lemmela.net \
--to=oskari@lemmela.net \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quentin.schulz@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®