mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Huang Wei <huangwei@kylinos.cn>
Cc: Hans de Goede <hansg@kernel.org>,
	hmh@hmh.eng.br,  Mark Pearson <mpearson-lenovo@squebb.ca>,
	derekjohn.clark@gmail.com,  ibm-acpi-devel@lists.sourceforge.net,
	platform-driver-x86@vger.kernel.org,
	 LKML <linux-kernel@vger.kernel.org>,
	thisisamirv <thisisamirv@gmail.com>
Subject: Re: [PATCH] platform/x86: thinkpad_acpi: Add X9-14 Gen 1 to non-standard thermal/fan quirk tables
Date: Fri, 18 Sep 2026 18:15:08 +0300 (EEST)	[thread overview]
Message-ID: <c8339940-7bcb-c62c-20a3-63f6db19f3d4@linux.intel.com> (raw)
In-Reply-To: <20260826073014.2611191-1-huangwei@kylinos.cn>

On Wed, 26 Aug 2026, Huang Wei wrote:

> The Lenovo ThinkPad X9-14 Gen 1 uses a non-standard Embedded Controller
> firmware (ECFW) whose thermal and fan registers are not located at the
> classic addresses. On this model the thermal registers sit at 0xA8-0xAF /
> 0xB8-0xBF and the fan registers use the non-standard offsets, instead of
> the legacy 0x78-0x7F / 0xC0-0xC7 (thermal) and 0x2f / 0x84 (fan).
> 
> Because the model is not covered by the existing quirk tables, the driver
> probes the legacy thermal addresses during init, reads back 0x00 from
> every register, concludes the EC is "misbehaving" and disables all
> thermal sensor access:
> 
>   thinkpad_acpi: ThinkPad ACPI EC access misbehaving, disabling thermal
>   sensors access
> 
> Fan access is affected the same way, leaving fan1/fan2 reporting 0 RPM.
> 
> The infrastructure for these non-standard ECFW models is already in place
> (commit 301c1904d638 ("platform/x86: thinkpad_acpi: Fix to correct wrong
> temp reporting on some ThinkPads")); the X9-14 Gen 1 simply was not added
> to the model lists yet. Add its BIOS model code N4D to both the thermal
> and fan quirk tables so that:
>   - thermal_read_mode_check() selects TPACPI_THERMAL_TPEC_12 and reads
>     the 0xA8/0xB8 registers, and
>   - fan_init() selects the non-standard fan register addresses.
> 
> Reported-by: thisisamirv <thisisamirv@gmail.com>
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221228
> Signed-off-by: Huang Wei <huangwei@kylinos.cn>
> ---
>  drivers/platform/x86/lenovo/thinkpad_acpi.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/platform/x86/lenovo/thinkpad_acpi.c b/drivers/platform/x86/lenovo/thinkpad_acpi.c
> index 6dd7c28fc0db..498139ac8f4b 100644
> --- a/drivers/platform/x86/lenovo/thinkpad_acpi.c
> +++ b/drivers/platform/x86/lenovo/thinkpad_acpi.c
> @@ -6021,6 +6021,7 @@ static const struct tpacpi_quirk thermal_quirk_table[] __initconst = {
>  	TPACPI_Q_LNV3('R', '0', 'T', true),	/* 11e Gen5 GL*/
>  	TPACPI_Q_LNV3('R', '1', 'D', true),	/* 11e Gen5 GL-R*/
>  	TPACPI_Q_LNV3('R', '0', 'V', true),	/* 11e Gen5 KL-Y*/
> +	TPACPI_Q_LNV3('N', '4', 'D', true),	/* X9-14 Gen 1 */
>  };
>  
>  static enum thermal_access_mode thermal_read_mode;
> @@ -8845,6 +8846,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
>  	TPACPI_Q_LNV3('R', '0', 'T', TPACPI_FAN_NS),	/* 11e Gen5 GL */
>  	TPACPI_Q_LNV3('R', '1', 'D', TPACPI_FAN_NS),	/* 11e Gen5 GL-R */
>  	TPACPI_Q_LNV3('R', '0', 'V', TPACPI_FAN_NS),	/* 11e Gen5 KL-Y */
> +	TPACPI_Q_LNV3('N', '4', 'D', TPACPI_FAN_NS),	/* X9-14 Gen 1 */
>  	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
>  	TPACPI_Q_LNV3('R', '0', 'Q', TPACPI_FAN_DECRPM),/* L480 */
>  	TPACPI_Q_LNV('8', 'F', TPACPI_FAN_TPR),		/* ThinkPad x120e */

Hi,

This no longer applies cleanly so please respin.


-- 
 i.


  reply	other threads:[~2026-09-18 15:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-26  7:30 Huang Wei
2026-09-18 15:15 ` Ilpo Järvinen [this message]
2026-09-18 16:15   ` [PATCH v2] " Huang Wei
2026-09-18 18:25     ` Ilpo Järvinen
2026-09-18 22:00       ` Mark Pearson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c8339940-7bcb-c62c-20a3-63f6db19f3d4@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=derekjohn.clark@gmail.com \
    --cc=hansg@kernel.org \
    --cc=hmh@hmh.eng.br \
    --cc=huangwei@kylinos.cn \
    --cc=ibm-acpi-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpearson-lenovo@squebb.ca \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=thisisamirv@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®