Re: [PATCH] net: cpsw_new: unregister devlink on port registration failure

["Sverdlin, Alexander" <alexander.sverdlin@siemens.com>]

Hi Guangshuo,

On Wed, 2026-06-03 at 22:07 +0800, Guangshuo Li wrote:
> cpsw_probe() registers devlink before registering the CPSW ports.
> 
> If cpsw_register_ports() fails, the error path only unregisters the
> notifiers and then releases the lower level resources. It does not undo
> the successful cpsw_register_devlink() call, leaving the devlink instance
> and its parameters registered after probe has failed.
> 
> Add a devlink cleanup label for the path where devlink registration has
> already succeeded, and use it when port registration fails.
> 
> Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>

thanks for the patch! Apart from the issue Andrew mentioned, the fix itself
looks good to me,

Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>

> ---
>  drivers/net/ethernet/ti/cpsw_new.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
> index 7f42f58a4b03..95b3b58db6e0 100644
> --- a/drivers/net/ethernet/ti/cpsw_new.c
> +++ b/drivers/net/ethernet/ti/cpsw_new.c
> @@ -2050,7 +2050,7 @@ static int cpsw_probe(struct platform_device *pdev)
>  
>  	ret = cpsw_register_ports(cpsw);
>  	if (ret)
> -		goto clean_unregister_notifiers;
> +		goto clean_unregister_devlink;
>  
>  	dev_notice(dev, "initialized (regs %pa, pool size %d) hw_ver:%08X %d.%d (%d)\n",
>  		   &ss_res->start, descs_pool_size,
> @@ -2062,6 +2062,8 @@ static int cpsw_probe(struct platform_device *pdev)
>  
>  	return 0;
>  
> +clean_unregister_devlink:
> +	cpsw_unregister_devlink(cpsw);
>  clean_unregister_notifiers:
>  	cpsw_unregister_notifiers(cpsw);
>  clean_cpts:

-- 
Alexander Sverdlin
Siemens AG
www.siemens.com