From: Mieczyslaw Nalewaj <namiltd@yahoo.com>
To: linusw@kernel.org, alsi@bang-olufsen.dk, andrew@lunn.ch,
olteanv@gmail.com, kuba@kernel.org, davem@davemloft.net,
edumazet@google.com, pabeni@redhat.com, linux@armlinux.org.uk,
luizluca@gmail.com, maxime.chevallier@bootlin.com,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next 1/8] net: dsa: realtek: rtl8365mb: detect RTL8367S-VB
Date: Wed, 7 Oct 2026 22:36:15 +0200 [thread overview]
Message-ID: <c973a8a3-6853-4214-a7df-20f99f47d327@yahoo.com> (raw)
In-Reply-To: <84fc7483-b22d-45ea-a3b8-3285dc357265@yahoo.com>
The RTL8367S-VB belongs to a newer hardware generation (family D) which
features a modified register layout and independent logic blocks compared
to the older legacy chips (family C). This patch introduces the family
separation by defining RTL8365MB_FAMILY_D, hooks up the new hardware
ID (0x6642), revision, and maps its unique external interface capability
where SGMII/HSGMII sits on ext_int 0 instead of ext_int 1.
Also cap priv->num_ports at RTL8365MB_D_MAX_NUM_PORTS (8) for family D.
This is a functional change: it sets ds->num_ports, the IRQ domain size
and the bound of every loop over priv->num_ports.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
---
drivers/net/dsa/realtek/rtl8365mb.h | 14 ++++++++++
drivers/net/dsa/realtek/rtl8365mb_main.c | 35 +++++++++++++++++++++++-
2 files changed, 48 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/dsa/realtek/rtl8365mb.h
diff --git a/drivers/net/dsa/realtek/rtl8365mb.h b/drivers/net/dsa/realtek/rtl8365mb.h
new file mode 100644
index 0000000..315de4c
--- /dev/null
+++ b/drivers/net/dsa/realtek/rtl8365mb.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _RTL8365MB_H
+#define _RTL8365MB_H
+
+#include "realtek.h"
+
+enum rtl8365mb_family {
+ RTL8365MB_FAMILY_C,
+ RTL8365MB_FAMILY_D,
+};
+
+enum rtl8365mb_family rtl8365mb_get_family(struct realtek_priv *priv);
+
+#endif /* _RTL8365MB_H */
diff --git a/drivers/net/dsa/realtek/rtl8365mb_main.c b/drivers/net/dsa/realtek/rtl8365mb_main.c
index da06f95..80fc551 100644
--- a/drivers/net/dsa/realtek/rtl8365mb_main.c
+++ b/drivers/net/dsa/realtek/rtl8365mb_main.c
@@ -81,6 +81,7 @@
* - RTL8367RB-VB
* - RTL8367SB
* - RTL8367S
+ * - RTL8367S-VB
* - RTL8370MB
* - RTL8310SR
*
@@ -110,12 +111,14 @@
#include "rtl83xx.h"
#include "rtl8365mb_l2.h"
#include "rtl8365mb_vlan.h"
+#include "rtl8365mb.h"
/* Family-specific data and limits */
#define RTL8365MB_PHYADDRMAX 7
#define RTL8365MB_NUM_PHYREGS 32
#define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1)
#define RTL8365MB_MAX_NUM_PORTS 11
+#define RTL8365MB_D_MAX_NUM_PORTS 8
/* Valid for the whole family except RTL8370B, which has 4160 entries.
* RTL8370B is mentioned in vendor code but it might not even belong
* to the same RTL8367C family.
@@ -707,6 +710,7 @@ struct rtl8365mb_extint {
* @name: human-readable chip name
* @chip_id: chip identifier
* @chip_ver: chip silicon revision
+ * @family: chip family
* @extints: available external interfaces
* @jam_table: chip-specific initialization jam table
* @jam_size: size of the chip's jam table
@@ -719,6 +723,7 @@ struct rtl8365mb_chip_info {
const char *name;
u32 chip_id;
u32 chip_ver;
+ enum rtl8365mb_family family;
const struct rtl8365mb_extint extints[RTL8365MB_MAX_NUM_EXTINTS];
const struct rtl8365mb_jam_tbl_entry *jam_table;
size_t jam_size;
@@ -731,6 +736,7 @@ static const struct rtl8365mb_chip_info rtl8365mb_chip_infos[] = {
.name = "RTL8365MB-VC",
.chip_id = 0x6367,
.chip_ver = 0x0040,
+ .family = RTL8365MB_FAMILY_C,
.extints = {
{ 6, 1, PHY_INTF(MII) | PHY_INTF(TMII) |
PHY_INTF(RMII) | PHY_INTF(RGMII) },
@@ -742,6 +748,7 @@ static const struct rtl8365mb_chip_info rtl8365mb_chip_infos[] = {
.name = "RTL8367S",
.chip_id = 0x6367,
.chip_ver = 0x00A0,
+ .family = RTL8365MB_FAMILY_C,
.extints = {
{ 6, 1, PHY_INTF(SGMII) | PHY_INTF(HSGMII) },
{ 7, 2, PHY_INTF(MII) | PHY_INTF(TMII) |
@@ -754,6 +761,7 @@ static const struct rtl8365mb_chip_info rtl8365mb_chip_infos[] = {
.name = "RTL8367SB",
.chip_id = 0x6367,
.chip_ver = 0x0010,
+ .family = RTL8365MB_FAMILY_C,
.extints = {
{ 6, 1, PHY_INTF(MII) | PHY_INTF(TMII) |
PHY_INTF(RMII) | PHY_INTF(RGMII) |
@@ -768,6 +776,7 @@ static const struct rtl8365mb_chip_info rtl8365mb_chip_infos[] = {
.name = "RTL8367RB-VB",
.chip_id = 0x6367,
.chip_ver = 0x0020,
+ .family = RTL8365MB_FAMILY_C,
.extints = {
{ 6, 1, PHY_INTF(MII) | PHY_INTF(TMII) |
PHY_INTF(RMII) | PHY_INTF(RGMII) },
@@ -777,6 +786,19 @@ static const struct rtl8365mb_chip_info rtl8365mb_chip_infos[] = {
.jam_table = rtl8365mb_init_jam_8365mb_vc,
.jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc),
},
+ {
+ .name = "RTL8367S-VB",
+ .chip_id = 0x6642,
+ .chip_ver = 0x0010,
+ .family = RTL8365MB_FAMILY_D,
+ .extints = {
+ { 6, 0, PHY_INTF(SGMII) | PHY_INTF(HSGMII) },
+ { 7, 1, PHY_INTF(MII) | PHY_INTF(TMII) |
+ PHY_INTF(RMII) | PHY_INTF(RGMII) },
+ },
+ .jam_table = rtl8365mb_init_jam_8365mb_vc,
+ .jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc),
+ },
};
enum rtl8365mb_stp_state {
@@ -874,6 +896,13 @@ struct rtl8365mb {
#define pcs_to_rtl8365mb(_pcs) container_of((_pcs), struct rtl8365mb, pcs)
+enum rtl8365mb_family rtl8365mb_get_family(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+
+ return mb->chip_info->family;
+}
+
static int rtl8365mb_phy_poll_busy(struct realtek_priv *priv)
{
u32 val;
@@ -3349,7 +3378,11 @@ static int rtl8365mb_detect(struct realtek_priv *priv)
dev_info(priv->dev, "found an %s switch\n", mb->chip_info->name);
- priv->num_ports = RTL8365MB_MAX_NUM_PORTS;
+ if (rtl8365mb_get_family(priv) == RTL8365MB_FAMILY_D)
+ priv->num_ports = RTL8365MB_D_MAX_NUM_PORTS;
+ else
+ priv->num_ports = RTL8365MB_MAX_NUM_PORTS;
+
mb->priv = priv;
mb->cpu.trap_port = RTL8365MB_MAX_NUM_PORTS;
mb->cpu.insert = RTL8365MB_CPU_INSERT_TO_ALL;
--
2.53.0
next prev parent reply other threads:[~2026-10-07 20:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <84fc7483-b22d-45ea-a3b8-3285dc357265.ref@yahoo.com>
2026-10-07 20:34 ` [PATCH net-next 0/8] net: dsa: realtek: rtl8365mb: add support for RTL8367S-VB Mieczyslaw Nalewaj
2026-10-07 20:36 ` Mieczyslaw Nalewaj [this message]
2026-10-07 20:37 ` [PATCH net-next 2/8] net: dsa: realtek: rtl8365mb: set speed for family D Mieczyslaw Nalewaj
2026-10-07 20:38 ` [PATCH net-next 3/8] net: dsa: realtek: rtl8365mb: get pvid " Mieczyslaw Nalewaj
2026-10-07 20:39 ` [PATCH net-next 4/8] net: dsa: realtek: rtl8365mb: set RGMII mode " Mieczyslaw Nalewaj
2026-10-08 1:22 ` Andrew Lunn
2026-10-07 20:39 ` [PATCH net-next 5/8] net: dsa: realtek: rtl8365mb: set and get vlan 4k " Mieczyslaw Nalewaj
2026-10-07 20:40 ` [PATCH net-next 6/8] net: dsa: realtek: rtl8365mb: set/clear pvid " Mieczyslaw Nalewaj
2026-10-07 20:41 ` [PATCH net-next 7/8] net: dsa: realtek: rtl8365mb: add family D SDS13 PCS support Mieczyslaw Nalewaj
2026-10-07 20:42 ` [PATCH net-next 8/8] net: dsa: realtek: rtl8365mb: re-latch the family D SerDes Mieczyslaw Nalewaj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c973a8a3-6853-4214-a7df-20f99f47d327@yahoo.com \
--to=namiltd@yahoo.com \
--cc=alsi@bang-olufsen.dk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=luizluca@gmail.com \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®