From: Xulin Sun <xulin.sun@windriver.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: tps65217: add power regulator & backlight drivers support
Date: Wed, 17 Jan 2024 15:56:26 +0800 [thread overview]
Message-ID: <c9f5b6b7-7e01-5b99-c2a9-1bbfd50ebb27@windriver.com> (raw)
In-Reply-To: <70d52400-13b8-4f2f-81e3-0753e77e129f@linaro.org>
On 1/17/24 15:24, Krzysztof Kozlowski wrote:
> On 17/01/2024 05:33, Xulin Sun wrote:
>> Support TPS65217 voltage regulator driver and TPS65217 Backlight driver.
>> And enable them by default. This will avoid below booting failed
>> information:
>> tps65217-pmic: Failed to locate of_node [id: -1]
>> tps65217-bl: Failed to locate of_node [id: -1]
>>
>> Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
>> ---
>> arch/arm/boot/dts/tps65217.dtsi | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
>> index 0d463de5650f..f412e7476660 100644
>> --- a/arch/arm/boot/dts/tps65217.dtsi
>> +++ b/arch/arm/boot/dts/tps65217.dtsi
>> @@ -13,6 +13,16 @@ &tps {
>> interrupt-controller;
>> #interrupt-cells = <1>;
>>
>> + pmic {
>> + compatible = "ti,tps65217-pmic";
>> + status = "okay";
> Why do you need status here?
It corresponds to the drvier: drivers/regulator/tps65217-regulator.c,
and regulator is one of the main function of TPS65217.
I think it should be enabled by default, so set status to "okay" here.
Thanks
Xulin
>
> Best regards,
> Krzysztof
>
next prev parent reply other threads:[~2024-01-17 7:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-17 4:33 Xulin Sun
2024-01-17 7:24 ` Krzysztof Kozlowski
2024-01-17 7:56 ` Xulin Sun [this message]
2024-01-17 8:01 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c9f5b6b7-7e01-5b99-c2a9-1bbfd50ebb27@windriver.com \
--to=xulin.sun@windriver.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®