RE: [PATCH v4 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021

["Tony Huang 黃懷厚" <tony.huang@sunplus.com>]

Dear Krzysztof:

> > +++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
> > @@ -0,0 +1,79 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright
> > +(C) Sunplus Ltd. Co. 2021 %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mmc/sunplus,mmc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: sunplus MMC controller
> 
> s/sunplus/Sunplus/
> 

Below is my modification:
title: Sunplus MMC Controller

> > +
> > +allOf:
> > +  - $ref: "mmc-controller.yaml"
> 
> allOf below maintainers,
> 

I will modify it.

> > +
> > +maintainers:
> > +  - Tony Huang <tonyhuang.sunplus@gmail.com>
> > +  - Li-hao Kuo <lhjeff911@gmail.com>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - sunplus,mmc-v1
> > +      - sunplus,mmc-v2
> 
> How did this happen? Versions of blocks are usually discouraged, unless you
> have clear specification,. The previous discussion did not end with "add v1 and
> v2".
> 
> Do you have clear documentation/specification of these blocks? If no, please
> use SoC compatibles.
> 

v1: support SDIO 2.0							
v2: support eMMC 4.41							
The register base address and offset address of emmc and sd card are different.							
eMMC and sdcard are individual hardware settings							
We need version to distinguish different speeds							

> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    minItems: 1
> 
> maxItems
> 

I will modify it.

> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  max-frequency: true
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    mmc0: mmc@9c003b00 {
> > +        compatible = "sunplus,mmc-v2";
> > +        reg = <0x9c003b00 0x180>;
> > +        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
> > +        clocks = <&clkc 0x4e>;
> > +        resets = <&rstc 0x3e>;
> > +        bus-width = <8>;
> > +        max-frequency = <52000000>;
> > +        non-removable;
> > +        disable-wp;
> > +        cap-mmc-highspeed;
> > +        mmc-ddr-3_3v;
> > +        no-sdio;
> > +        no-sd;
> > +    };
> > +
> > +    mmc1: mmc@9c003e80 {
> > +       compatible = "sunplus,mmc-v1";
> > +       reg = <0x9c003e80 0x280>;
> > +       interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
> > +       clocks = <&clkc 0x4f>;
> > +       resets = <&rstc 0x3f>;
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&mmc1_mux &mmc1_mux_cd>;
> > +       max-frequency = <52000000>;
> > +       disable-wp;
> > +       cap-sd-highspeed;
> > +       no-sdio;
> > +       no-mmc;
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS index fb18ce7..2d91431 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -18242,6 +18242,12 @@ L:	netdev@vger.kernel.org
> >  S:	Maintained
> >  F:	drivers/net/ethernet/dlink/sundance.c
> >
> > +SUNPLUS MMC DRIVER
> > +M:	Tony Huang <tonyhuang.sunplus@gmail.com>
> > +M: Li-hao Kuo <lhjeff911@gmail.com>
> 
> Wrong indentation.

I will modify it.

> 
> > +S:	Maintained
> > +F:	Documentation/devicetree/bindings/mmc/sunplu,mmc.yaml
> 
> Wrong file name.
> 

I will modify it.