From: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
To: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>,
<linux-kernel@vger.kernel.org>, <horms@kernel.org>,
<John.p.donnelly@oracle.com>, <will@kernel.org>,
<kexec@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4] arm64: kdump: simplify the reservation behaviour of crashkernel=,high
Date: Sat, 25 Mar 2023 09:53:36 +0800 [thread overview]
Message-ID: <cac9bb78-18b3-6f7d-8f35-db15de7c9b80@huawei.com> (raw)
In-Reply-To: <ZB25WN02AHOS8RTT@MiWiFi-R3L-srv>
On 2023/3/24 22:53, Baoquan He wrote:
> Hi Leizhen,
>
> On 03/24/23 at 10:47am, Leizhen (ThunderTown) wrote:
> ......
>>>>>> 2) with the fixed CRASH_ADDR_LOW_MAX as 4G, we can easily fix the
>>>>>> problem of base page mapping for the whole linear mapping if crsahkernel=
>>>>>> is set in kernel parameter shown in [1] at bottom.
>>>>>
>>>>> That's a different problem ;). I should re-read that thread, forgot most
>>>>> of the details but I recall one of the counter arguments was that there
>>>>> isn't a strong case to unmap the crashkernel reservation. Now, if we
>>>>> place crashdump kernel image goes in the 'high' reservation, can we not
>>>>> leave the 'low' reservation mapped? We don't really care about it as it
>>>>> wouldn't have any meaningful code/data to be preserved. If the 'high'
>>>>> one goes above 4G always, we don't depend on the arm64_dma_phys_limit.
>>>>
>>>> Yes, this looks ideal. While it only works when crashkernel=,high case and
>>>> it succeeds to reserve a memory region for the specified size of crashkernel
>>>> high memory. At below, we have 4 cases of crashkernel= syntax:
>>>>
>>>> crashkernel=size
>>>> 1)first attempt: low memory under arm64_dma_phys_limit
>>>> 2)fallback: finding memory above 4G
>>>
>>> (2) should be 'finding memory above arm64_dma_phys_limit' to keep the
>>> current behaviour for RPi4.
>>>
>>>> crashkernel=size,high
>>>> 3)first attempt: finding memory above 4G
>>>> 4)fallback: low memory under arm64_dma_phys_limit
>>>
>>> Yes.
>>>
>>>> case 3) works with your suggestion. However, 1), 2), 4) all need to
>>>> defer to bootmem_init(). With these cases and different handling,
>>>> reserve_crashkernel() could be too complicated.
>>>
>>> Ah, because of the fallback below arm64_dma_phys_limit as in (4), we
>>> still can't move the full crashkernel reservation early. Well, we could
>>> do it in two steps: (a) early attempt at crashkernel reservation above
>>> 4G if 'high' was specified and we avoid mapping it if successful and (b)
>>> do the late crashkernel reservation below arm64_dma_phys_limit and skip
>>> unmapping as being too late. This way most server-like platforms would
>>> get a reservation above 4G, unmapped.
>>>
>>>> I am wondering if we can cancel the protection of crashkernel memory
>>>> region on arm64 for now. In earlier discussion, people questioned if the
>>>> protection is necessary on arm64. After comparison, I would rather take
>>>> away the protection method of crashkernel region since they try to
>>>> protect in a chance in one million , while the base page mapping for the
>>>> whole linear mapping is mitigating arm64 high end server always.
>>>
>>> This works for me. We can add the protection later for addresses above
>>> 4GB only as mentioned above.
>>
>> Recently, I've also been rethinking the performance issues when kdump is
>> enabled. I have a new idea. For crashkernel=X, we can temporarily search
>> for free memory from the low address to the high address. As below:
>>
>> save_bottom_up = memblock_bottom_up();
>> if (!high)
>> memblock_set_bottom_up(true);
>> crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, crash_base, crash_max);
>> memblock_set_bottom_up(save_bottom_up);
>>
>> The final code change should be small, and I'll try it today.
>
> I have sent a patchset to remove the crashkernel region protection code
> as per Catalin's confirmation. I personally like the code conciseness w/o
> protection because kinds of crahskernel reservation has been complex,
> the situation on arm64 will makes it worse if we try to keep the
> protection and fix the performance issue. While I am glad to see any
> attempt to achieve the two goals if it's satisfactory.
I saw the patchset. No protection is also a good idea, the code is
simplified a lot.
>
> .
>
--
Regards,
Zhen Lei
next prev parent reply other threads:[~2023-03-25 1:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-06 8:41 Baoquan He
2023-03-06 12:55 ` Leizhen (ThunderTown)
2023-03-08 11:02 ` Simon Horman
2023-03-15 14:52 ` Catalin Marinas
2023-03-16 9:47 ` Baoquan He
2023-03-16 17:35 ` Catalin Marinas
2023-03-17 15:09 ` Baoquan He
2023-03-17 18:05 ` Catalin Marinas
2023-03-20 13:12 ` Baoquan He
2023-03-23 17:25 ` Catalin Marinas
2023-03-24 2:47 ` Leizhen (ThunderTown)
2023-03-24 14:53 ` Baoquan He
2023-03-25 1:53 ` Leizhen (ThunderTown) [this message]
2023-03-24 14:08 ` Baoquan He
2023-03-24 17:08 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cac9bb78-18b3-6f7d-8f35-db15de7c9b80@huawei.com \
--to=thunder.leizhen@huawei.com \
--cc=John.p.donnelly@oracle.com \
--cc=bhe@redhat.com \
--cc=catalin.marinas@arm.com \
--cc=horms@kernel.org \
--cc=kexec@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®