From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Frank Wunderlich <linux@fw-web.de>, linux-rockchip@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Philipp Zabel <p.zabel@pengutronix.de>,
Yifeng Zhao <yifeng.zhao@rock-chips.com>,
Johan Jonker <jbx6244@gmail.com>,
Peter Geis <pgwipeout@gmail.com>, Simon Xue <xxm@rock-chips.com>,
Liang Chen <cl@rock-chips.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
Date: Fri, 26 Aug 2022 09:50:34 +0300 [thread overview]
Message-ID: <cae915f6-c951-ba97-346d-00922c85067d@linaro.org> (raw)
In-Reply-To: <20220825193836.54262-6-linux@fw-web.de>
On 25/08/2022 22:38, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
>
> Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
> set PCIe related regulators to always on.
>
> Suggested-by: Peter Geis <pgwipeout@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> v5:
> - rebase on 6.0-rc1
> - add pinctrl for pcie
> - fix ngff pwr_en_h gpio for hw ref 1.1
>
> v4:
> - change u8 lane-map to u32 data-lanes
>
> v3:
> - squash lane-map over bifurcation property
> - add comment which slot is M2 and which one if mPCIe
> - fixes from Peter:
> - drop regulator-always-on/regulator-boot-on from regulators
> - increase startup-delay-us for regulators
> - set phy-mode on PCIe3-phy
> - add num-lanes to PCIe overrides
> - add usb node for to PCIe/m2
> - move lane-map from PCIe controller to PCIe-phy
>
> v2:
> - underscores in nodenames
> - rockchip,bifurcation to vendor unspecific bifurcation
> - fix trailing space
> ---
> .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 117 ++++++++++++++++++
> 1 file changed, 117 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> index 93d383b8be87..40b90c052634 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> @@ -86,6 +86,66 @@ vcc5v0_sys: vcc5v0-sys {
> vin-supply = <&dc_12v>;
> };
>
> + pcie30_avdd0v9: pcie30-avdd0v9 {
Use consistent naming, so if other nodes have "regulator" suffix, use it
here as well.
> + compatible = "regulator-fixed";
> + regulator-name = "pcie30_avdd0v9";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + pcie30_avdd1v8: pcie30-avdd1v8 {
Ditto.
> + compatible = "regulator-fixed";
> + regulator-name = "pcie30_avdd1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + /* pi6c pcie clock generator feeds both ports */
> + vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_pcie";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <200000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-08-26 6:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-25 19:38 [PATCH v5 0/5] RK3568 PCIe V3 support Frank Wunderlich
2022-08-25 19:38 ` [PATCH v5 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy Frank Wunderlich
2022-09-04 15:06 ` Vinod Koul
2022-10-04 15:09 ` Rob Herring
2022-10-04 15:19 ` Frank Wunderlich
2022-10-04 20:57 ` Sebastian Reichel
2022-10-11 4:41 ` Andrew Powers-Holmes
2022-08-25 19:38 ` [PATCH v5 2/5] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf Frank Wunderlich
2022-08-25 19:38 ` [PATCH v5 3/5] phy: rockchip: Support PCIe v3 Frank Wunderlich
2022-09-04 15:06 ` Vinod Koul
2022-08-25 19:38 ` [PATCH v5 4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes Frank Wunderlich
2022-08-25 19:38 ` [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro Frank Wunderlich
2022-08-26 6:50 ` Krzysztof Kozlowski [this message]
2022-08-27 8:50 ` Aw: " Frank Wunderlich
2022-08-27 8:56 ` Krzysztof Kozlowski
2022-08-27 9:14 ` Aw: " Frank Wunderlich
2022-08-27 9:19 ` Krzysztof Kozlowski
2022-09-04 15:28 ` Heiko Stübner
2022-09-04 17:22 ` (subset) [PATCH v5 0/5] RK3568 PCIe V3 support Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cae915f6-c951-ba97-346d-00922c85067d@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=cl@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@fw-web.de \
--cc=p.zabel@pengutronix.de \
--cc=pgwipeout@gmail.com \
--cc=robh+dt@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=vkoul@kernel.org \
--cc=xxm@rock-chips.com \
--cc=yifeng.zhao@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®