From: Armin Wolf <W_Armin@gmx.de>
To: Werner Sembach <wse@tuxedocomputers.com>,
hansg@kernel.org, ilpo.jarvinen@linux.intel.com
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/5] platform/x86/uniwill: Implement USB-C power priority setting
Date: Sat, 7 Mar 2026 16:52:08 +0100 [thread overview]
Message-ID: <cb3438af-2f5e-4699-9feb-8e980af8d1d2@gmx.de> (raw)
In-Reply-To: <20260303225440.504358-3-wse@tuxedocomputers.com>
Am 03.03.26 um 23:54 schrieb Werner Sembach:
> On some devices Uniwill offers the option to set the USB-C port to
> prioritise charging or performance. This patch exposes this setting to the
> userspace via sysfs for all TUXEDO devices supporting it.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
> ---
> drivers/platform/x86/uniwill/uniwill-acpi.c | 145 +++++++++++++++++++-
> 1 file changed, 138 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/platform/x86/uniwill/uniwill-acpi.c b/drivers/platform/x86/uniwill/uniwill-acpi.c
> index 048b265bff374..22ae5fccd6a06 100644
> --- a/drivers/platform/x86/uniwill/uniwill-acpi.c
> +++ b/drivers/platform/x86/uniwill/uniwill-acpi.c
> @@ -266,8 +266,8 @@
> #define BATTERY_CHARGE_FULL_OVER_24H BIT(3)
> #define BATTERY_ERM_STATUS_REACHED BIT(4)
>
> -#define EC_ADDR_CHARGE_PRIO 0x07CC
> -#define CHARGING_PERFORMANCE BIT(7)
> +#define EC_ADDR_USB_C_POWER_PRIORITY 0x07CC
> +#define USB_C_POWER_PRIORITY BIT(7)
>
> /* Same bits as EC_ADDR_LIGHTBAR_AC_CTRL except LIGHTBAR_S3_OFF */
> #define EC_ADDR_LIGHTBAR_BAT_CTRL 0x07E2
> @@ -324,6 +324,12 @@
> #define UNIWILL_FEATURE_PRIMARY_FAN BIT(7)
> #define UNIWILL_FEATURE_SECONDARY_FAN BIT(8)
> #define UNIWILL_FEATURE_NVIDIA_CTGP_CONTROL BIT(9)
> +#define UNIWILL_FEATURE_USB_C_POWER_PRIORITY BIT(10)
> +
> +enum usb_c_power_priority_options {
> + USB_C_POWER_PRIORITY_CHARGING = 0,
> + USB_C_POWER_PRIORITY_PERFORMANCE,
> +};
>
> struct uniwill_data {
> struct device *dev;
> @@ -343,6 +349,8 @@ struct uniwill_data {
> struct mutex input_lock; /* Protects input sequence during notify */
> struct input_dev *input_device;
> struct notifier_block nb;
> + struct mutex usb_c_power_priority_lock; /* Protects dependent bit write and state safe */
> + enum usb_c_power_priority_options last_usb_c_power_priority_option;
> };
>
> struct uniwill_battery_entry {
> @@ -527,6 +535,7 @@ static bool uniwill_writeable_reg(struct device *dev, unsigned int reg)
> case EC_ADDR_CTGP_DB_CTGP_OFFSET:
> case EC_ADDR_CTGP_DB_TPP_OFFSET:
> case EC_ADDR_CTGP_DB_DB_OFFSET:
> + case EC_ADDR_USB_C_POWER_PRIORITY:
> return true;
> default:
> return false;
> @@ -565,6 +574,7 @@ static bool uniwill_readable_reg(struct device *dev, unsigned int reg)
> case EC_ADDR_CTGP_DB_CTGP_OFFSET:
> case EC_ADDR_CTGP_DB_TPP_OFFSET:
> case EC_ADDR_CTGP_DB_DB_OFFSET:
> + case EC_ADDR_USB_C_POWER_PRIORITY:
> return true;
> default:
> return false;
> @@ -587,6 +597,7 @@ static bool uniwill_volatile_reg(struct device *dev, unsigned int reg)
> case EC_ADDR_TRIGGER:
> case EC_ADDR_SWITCH_STATUS:
> case EC_ADDR_CHARGE_CTRL:
> + case EC_ADDR_USB_C_POWER_PRIORITY:
> return true;
> default:
> return false;
> @@ -883,6 +894,104 @@ static int uniwill_nvidia_ctgp_init(struct uniwill_data *data)
> return 0;
> }
>
> +static const char * const USB_C_POWER_PRIORITY_TEXT[] = {
> + [USB_C_POWER_PRIORITY_CHARGING] = "charging",
> + [USB_C_POWER_PRIORITY_PERFORMANCE] = "performance",
> +};
> +
> +static const u8 USB_C_POWER_PRIORITY_VALUE[] = {
> + [USB_C_POWER_PRIORITY_CHARGING] = 0,
> + [USB_C_POWER_PRIORITY_PERFORMANCE] = USB_C_POWER_PRIORITY,
> +};
> +
> +static ssize_t usb_c_power_priority_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct uniwill_data *data = dev_get_drvdata(dev);
> + enum usb_c_power_priority_options option;
> + unsigned int value;
> + int ret;
> +
> + option = sysfs_match_string(USB_C_POWER_PRIORITY_TEXT, buf);
> + if (option < 0)
> + return option;
> +
> + value = USB_C_POWER_PRIORITY_VALUE[option];
> +
> + guard(mutex)(&data->usb_c_power_priority_lock);
> +
> + ret = regmap_update_bits(data->regmap, EC_ADDR_USB_C_POWER_PRIORITY,
> + USB_C_POWER_PRIORITY, value);
> + if (ret < 0)
> + return ret;
> +
> + data->last_usb_c_power_priority_option = option;
> +
> + return count;
> +}
> +
> +static ssize_t usb_c_power_priority_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct uniwill_data *data = dev_get_drvdata(dev);
> + unsigned int value;
> + int ret;
> +
> + ret = regmap_read(data->regmap, EC_ADDR_USB_C_POWER_PRIORITY, &value);
> + if (ret < 0)
> + return ret;
> +
> + value &= USB_C_POWER_PRIORITY;
> +
> + if (USB_C_POWER_PRIORITY_VALUE[USB_C_POWER_PRIORITY_PERFORMANCE] == value)
> + return sysfs_emit(buf, "%s\n",
> + USB_C_POWER_PRIORITY_TEXT[USB_C_POWER_PRIORITY_PERFORMANCE]);
> +
> + return sysfs_emit(buf, "%s\n", USB_C_POWER_PRIORITY_TEXT[USB_C_POWER_PRIORITY_CHARGING]);
> +}
> +
> +static DEVICE_ATTR_RW(usb_c_power_priority);
> +
> +static int usb_c_power_priority_restore(struct uniwill_data *data)
> +{
> + unsigned int value;
> +
> + value = USB_C_POWER_PRIORITY_VALUE[data->last_usb_c_power_priority_option];
> +
> + guard(mutex)(&data->usb_c_power_priority_lock);
> +
> + return regmap_update_bits(data->regmap, EC_ADDR_USB_C_POWER_PRIORITY,
> + USB_C_POWER_PRIORITY, value);
> +}
> +
> +static int usb_c_power_priority_init(struct uniwill_data *data)
> +{
> + unsigned int value;
> + int ret;
> +
> + if (!uniwill_device_supports(data, UNIWILL_FEATURE_USB_C_POWER_PRIORITY))
> + return 0;
> +
> + ret = devm_mutex_init(data->dev, &data->usb_c_power_priority_lock);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_read(data->regmap, EC_ADDR_USB_C_POWER_PRIORITY, &value);
> + if (ret < 0)
> + return ret;
> +
> + value &= USB_C_POWER_PRIORITY;
> +
> + data->last_usb_c_power_priority_option =
> + USB_C_POWER_PRIORITY_VALUE[USB_C_POWER_PRIORITY_PERFORMANCE] == value ?
> + USB_C_POWER_PRIORITY_PERFORMANCE :
> + USB_C_POWER_PRIORITY_CHARGING;
> +
> + return 0;
> +}
> +
> static struct attribute *uniwill_attrs[] = {
> /* Keyboard-related */
> &dev_attr_fn_lock.attr,
> @@ -893,6 +1002,7 @@ static struct attribute *uniwill_attrs[] = {
> &dev_attr_breathing_in_suspend.attr,
> /* Power-management-related */
> &dev_attr_ctgp_offset.attr,
> + &dev_attr_usb_c_power_priority.attr,
> NULL
> };
>
> @@ -927,6 +1037,11 @@ static umode_t uniwill_attr_is_visible(struct kobject *kobj, struct attribute *a
> return attr->mode;
> }
>
> + if (attr == &dev_attr_usb_c_power_priority.attr) {
> + if (uniwill_device_supports(data, UNIWILL_FEATURE_USB_C_POWER_PRIORITY))
> + return attr->mode;
> + }
> +
> return 0;
> }
>
> @@ -1417,11 +1532,10 @@ static int uniwill_notifier_call(struct notifier_block *nb, unsigned long action
>
> return NOTIFY_OK;
> case UNIWILL_OSD_DC_ADAPTER_CHANGED:
> - /* noop for the time being, will change once charging priority
> - * gets implemented.
> - */
> + if (!uniwill_device_supports(data, UNIWILL_FEATURE_USB_C_POWER_PRIORITY))
> + return NOTIFY_DONE;
>
> - return NOTIFY_OK;
> + return notifier_from_errno(usb_c_power_priority_restore(data));
> case UNIWILL_OSD_FN_LOCK:
> if (!uniwill_device_supports(data, UNIWILL_FEATURE_FN_LOCK))
> return NOTIFY_DONE;
> @@ -1515,10 +1629,15 @@ static int uniwill_probe(struct platform_device *pdev)
> return PTR_ERR(regmap);
>
> data->regmap = regmap;
> +
> ret = devm_mutex_init(&pdev->dev, &data->super_key_lock);
> if (ret < 0)
> return ret;
>
> + ret = usb_c_power_priority_init(data);
> + if (ret < 0)
> + return ret;
> +
> ret = uniwill_ec_init(data);
> if (ret < 0)
> return ret;
> @@ -1681,6 +1800,14 @@ static int uniwill_resume_nvidia_ctgp(struct uniwill_data *data)
> CTGP_DB_DB_ENABLE | CTGP_DB_CTGP_ENABLE);
> }
>
> +static int uniwill_resume_usb_c_power_priority(struct uniwill_data *data)
> +{
> + if (!uniwill_device_supports(data, UNIWILL_FEATURE_USB_C_POWER_PRIORITY))
> + return 0;
> +
> + return usb_c_power_priority_restore(data);
> +}
> +
> static int uniwill_resume(struct device *dev)
> {
> struct uniwill_data *data = dev_get_drvdata(dev);
> @@ -1704,7 +1831,11 @@ static int uniwill_resume(struct device *dev)
> if (ret < 0)
> return ret;
>
> - return uniwill_resume_nvidia_ctgp(data);
> + ret = uniwill_resume_nvidia_ctgp(data);
> + if (ret < 0)
> + return ret;
> +
> + return uniwill_resume_usb_c_power_priority(data);
> }
>
> static DEFINE_SIMPLE_DEV_PM_OPS(uniwill_pm_ops, uniwill_suspend, uniwill_resume);
next prev parent reply other threads:[~2026-03-07 15:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-03 22:54 [PATCH v4 0/5] platform/x86/uniwill: More support for TUXEDO devices Werner Sembach
2026-03-03 22:54 ` [PATCH v4 1/5] platform/x86/uniwill: uniwill-laptop: Rework hwmon feature defines Werner Sembach
2026-03-03 22:58 ` Werner Sembach
2026-03-03 22:54 ` [PATCH v4 2/5] platform/x86/uniwill: Implement USB-C power priority setting Werner Sembach
2026-03-07 15:52 ` Armin Wolf [this message]
2026-03-03 22:54 ` [PATCH v4 3/5] platform/x86/uniwill: Apply features across all TUXEDO devices Werner Sembach
2026-03-03 22:54 ` [PATCH v4 4/5] platform/x86/uniwill: Readd Schenker system vendor for XMG FUSION Werner Sembach
2026-03-07 15:56 ` Armin Wolf
2026-03-03 22:54 ` [PATCH v4 5/5] Documentation: laptops: Update documentation for uniwill laptops Werner Sembach
2026-03-03 23:05 ` Randy Dunlap
2026-03-10 22:34 ` Werner Sembach
2026-03-04 8:31 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cb3438af-2f5e-4699-9feb-8e980af8d1d2@gmx.de \
--to=w_armin@gmx.de \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=wse@tuxedocomputers.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®