mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jane Chu <jane.chu@oracle.com>
To: dan.j.williams@intel.com, vishal.l.verma@intel.com,
	dave.jiang@intel.com, ira.weiny@intel.com, willy@infradead.org,
	viro@zeniv.linux.org.uk, brauner@kernel.org,
	nvdimm@lists.linux.dev, linux-kernel@vger.kernel.org,
	linux-fsdevel@vger.kernel.org
Subject: Re: [PATCH v4 1/1] dax: enable dax fault handler to report VM_FAULT_HWPOISON
Date: Tue, 30 May 2023 12:17:22 -0700	[thread overview]
Message-ID: <cc03b826-5e0e-8535-627f-71ca3c07a7a6@oracle.com> (raw)
In-Reply-To: <20230509054714.1746956-2-jane.chu@oracle.com>

Ping... Is there any further concern?

-jane

On 5/8/2023 10:47 PM, Jane Chu wrote:
> When multiple processes mmap() a dax file, then at some point,
> a process issues a 'load' and consumes a hwpoison, the process
> receives a SIGBUS with si_code = BUS_MCEERR_AR and with si_lsb
> set for the poison scope. Soon after, any other process issues
> a 'load' to the poisoned page (that is unmapped from the kernel
> side by memory_failure), it receives a SIGBUS with
> si_code = BUS_ADRERR and without valid si_lsb.
> 
> This is confusing to user, and is different from page fault due
> to poison in RAM memory, also some helpful information is lost.
> 
> Channel dax backend driver's poison detection to the filesystem
> such that instead of reporting VM_FAULT_SIGBUS, it could report
> VM_FAULT_HWPOISON.
> 
> If user level block IO syscalls fail due to poison, the errno will
> be converted to EIO to maintain block API consistency.
> 
> Signed-off-by: Jane Chu <jane.chu@oracle.com>
> ---
>   drivers/dax/super.c          |  5 ++++-
>   drivers/nvdimm/pmem.c        |  2 +-
>   drivers/s390/block/dcssblk.c |  3 ++-
>   fs/dax.c                     | 11 ++++++-----
>   fs/fuse/virtio_fs.c          |  3 ++-
>   include/linux/dax.h          |  5 +++++
>   include/linux/mm.h           |  2 ++
>   7 files changed, 22 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/dax/super.c b/drivers/dax/super.c
> index c4c4728a36e4..0da9232ea175 100644
> --- a/drivers/dax/super.c
> +++ b/drivers/dax/super.c
> @@ -203,6 +203,8 @@ size_t dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
>   int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
>   			size_t nr_pages)
>   {
> +	int ret;
> +
>   	if (!dax_alive(dax_dev))
>   		return -ENXIO;
>   	/*
> @@ -213,7 +215,8 @@ int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
>   	if (nr_pages != 1)
>   		return -EIO;
>   
> -	return dax_dev->ops->zero_page_range(dax_dev, pgoff, nr_pages);
> +	ret = dax_dev->ops->zero_page_range(dax_dev, pgoff, nr_pages);
> +	return dax_mem2blk_err(ret);
>   }
>   EXPORT_SYMBOL_GPL(dax_zero_page_range);
>   
> diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
> index ceea55f621cc..46e094e56159 100644
> --- a/drivers/nvdimm/pmem.c
> +++ b/drivers/nvdimm/pmem.c
> @@ -260,7 +260,7 @@ __weak long __pmem_direct_access(struct pmem_device *pmem, pgoff_t pgoff,
>   		long actual_nr;
>   
>   		if (mode != DAX_RECOVERY_WRITE)
> -			return -EIO;
> +			return -EHWPOISON;
>   
>   		/*
>   		 * Set the recovery stride is set to kernel page size because
> diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
> index c09f2e053bf8..ee47ac520cd4 100644
> --- a/drivers/s390/block/dcssblk.c
> +++ b/drivers/s390/block/dcssblk.c
> @@ -54,7 +54,8 @@ static int dcssblk_dax_zero_page_range(struct dax_device *dax_dev,
>   	rc = dax_direct_access(dax_dev, pgoff, nr_pages, DAX_ACCESS,
>   			&kaddr, NULL);
>   	if (rc < 0)
> -		return rc;
> +		return dax_mem2blk_err(rc);
> +
>   	memset(kaddr, 0, nr_pages << PAGE_SHIFT);
>   	dax_flush(dax_dev, kaddr, nr_pages << PAGE_SHIFT);
>   	return 0;
> diff --git a/fs/dax.c b/fs/dax.c
> index 2ababb89918d..a26eb5abfdc0 100644
> --- a/fs/dax.c
> +++ b/fs/dax.c
> @@ -1148,7 +1148,7 @@ static int dax_iomap_copy_around(loff_t pos, uint64_t length, size_t align_size,
>   	if (!zero_edge) {
>   		ret = dax_iomap_direct_access(srcmap, pos, size, &saddr, NULL);
>   		if (ret)
> -			return ret;
> +			return dax_mem2blk_err(ret);
>   	}
>   
>   	if (copy_all) {
> @@ -1310,7 +1310,7 @@ static s64 dax_unshare_iter(struct iomap_iter *iter)
>   
>   out_unlock:
>   	dax_read_unlock(id);
> -	return ret;
> +	return dax_mem2blk_err(ret);
>   }
>   
>   int dax_file_unshare(struct inode *inode, loff_t pos, loff_t len,
> @@ -1342,7 +1342,8 @@ static int dax_memzero(struct iomap_iter *iter, loff_t pos, size_t size)
>   	ret = dax_direct_access(iomap->dax_dev, pgoff, 1, DAX_ACCESS, &kaddr,
>   				NULL);
>   	if (ret < 0)
> -		return ret;
> +		return dax_mem2blk_err(ret);
> +
>   	memset(kaddr + offset, 0, size);
>   	if (iomap->flags & IOMAP_F_SHARED)
>   		ret = dax_iomap_copy_around(pos, size, PAGE_SIZE, srcmap,
> @@ -1498,7 +1499,7 @@ static loff_t dax_iomap_iter(const struct iomap_iter *iomi,
>   
>   		map_len = dax_direct_access(dax_dev, pgoff, PHYS_PFN(size),
>   				DAX_ACCESS, &kaddr, NULL);
> -		if (map_len == -EIO && iov_iter_rw(iter) == WRITE) {
> +		if (map_len == -EHWPOISON && iov_iter_rw(iter) == WRITE) {
>   			map_len = dax_direct_access(dax_dev, pgoff,
>   					PHYS_PFN(size), DAX_RECOVERY_WRITE,
>   					&kaddr, NULL);
> @@ -1506,7 +1507,7 @@ static loff_t dax_iomap_iter(const struct iomap_iter *iomi,
>   				recovery = true;
>   		}
>   		if (map_len < 0) {
> -			ret = map_len;
> +			ret = dax_mem2blk_err(map_len);
>   			break;
>   		}
>   
> diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c
> index 4d8d4f16c727..5f1be1da92ce 100644
> --- a/fs/fuse/virtio_fs.c
> +++ b/fs/fuse/virtio_fs.c
> @@ -775,7 +775,8 @@ static int virtio_fs_zero_page_range(struct dax_device *dax_dev,
>   	rc = dax_direct_access(dax_dev, pgoff, nr_pages, DAX_ACCESS, &kaddr,
>   			       NULL);
>   	if (rc < 0)
> -		return rc;
> +		return dax_mem2blk_err(rc);
> +
>   	memset(kaddr, 0, nr_pages << PAGE_SHIFT);
>   	dax_flush(dax_dev, kaddr, nr_pages << PAGE_SHIFT);
>   	return 0;
> diff --git a/include/linux/dax.h b/include/linux/dax.h
> index bf6258472e49..a4e97acf60f5 100644
> --- a/include/linux/dax.h
> +++ b/include/linux/dax.h
> @@ -261,6 +261,11 @@ static inline bool dax_mapping(struct address_space *mapping)
>   	return mapping->host && IS_DAX(mapping->host);
>   }
>   
> +static inline int dax_mem2blk_err(int err)
> +{
> +	return (err == -EHWPOISON) ? -EIO : err;
> +}
> +
>   #ifdef CONFIG_DEV_DAX_HMEM_DEVICES
>   void hmem_register_resource(int target_nid, struct resource *r);
>   #else
> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index 1f79667824eb..e4c974587659 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -3217,6 +3217,8 @@ static inline vm_fault_t vmf_error(int err)
>   {
>   	if (err == -ENOMEM)
>   		return VM_FAULT_OOM;
> +	else if (err == -EHWPOISON)
> +		return VM_FAULT_HWPOISON;
>   	return VM_FAULT_SIGBUS;
>   }
>   

  reply	other threads:[~2023-05-30 19:17 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-09  5:47 [PATCH v4 0/1] " Jane Chu
2023-05-09  5:47 ` [PATCH v4 1/1] " Jane Chu
2023-05-30 19:17   ` Jane Chu [this message]
2023-06-09  3:16   ` Dan Williams
2023-06-15  0:49     ` Jane Chu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cc03b826-5e0e-8535-627f-71ca3c07a7a6@oracle.com \
    --to=jane.chu@oracle.com \
    --cc=brauner@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nvdimm@lists.linux.dev \
    --cc=viro@zeniv.linux.org.uk \
    --cc=vishal.l.verma@intel.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®