Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()

[Kuogee Hsieh <quic_khsieh@quicinc.com>]

On 9/19/2023 2:50 AM, Dmitry Baryshkov wrote:
> On Mon, 18 Sept 2023 at 20:48, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>>
>> On 9/15/2023 6:21 PM, Dmitry Baryshkov wrote:
>>> On Sat, 16 Sept 2023 at 00:38, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>>>> Add pm_runtime_force_suspend()/resume() to complete incorporating pm
>>>> runtime framework into DP driver. Both dp_pm_prepare() and dp_pm_complete()
>>>> are added to set hpd_state to correct state. After resume, DP driver will
>>>> re training its main link after .hpd_enable() callback enabled HPD
>>>> interrupts and bring up display accordingly.
>>> How will it re-train the main link? What is the code path for that?
>> 1) for edp, dp_bridge_atomic_enable(), called from framework, to start
>> link training and bring up display.
> And this path doesn't use .hpd_enable() which you have mentioned in
> the commit message. Please don't try to shorten the commit message.
> You see, I have had questions to several of them, which means that
> they were not verbose enough.

ok, my bad,

I will add more explain to commit text.

>> 2) for external DP, HPD_PLUG_INT will be generated to start link
>> training and bring up display.
> This should be hpd_notify, who starts link training, not some event.
>
>>> I think this is a misuse for prepare/complete callbacks, at least
>>> judging from their documentation.
>> 1) dp_pm_prepare() is called to make sure eDP/DP related power/clocks
>> are off and set hpd_state  to ST_SUSPENDED and nothing else.
>>
>> 2) dp_pm_completed() is called to set hpd_state to ST_ST_DISCONNECTED
>> (default state) and nothing else.
>>
>> I think both are doing proper action.
> Have you read the prepare() / complete() documentation? Does your
> usage follow the documented use case?
I think I can just remove both dp_pm_prepare and dp_pm_complete fro 
this  patch.
>
>>
>>>> Changes in v3:
>>>> -- replace dp_pm_suspend() with pm_runtime_force_suspend()
>>>> -- replace dp_pm_resume() with pm_runtime_force_resume()
>>>>
>>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>>> ---
>>>>    drivers/gpu/drm/msm/dp/dp_display.c | 87 +++++--------------------------------
>>>>    1 file changed, 10 insertions(+), 77 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
>>>> index b6992202..b58cb02 100644
>>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>>>> @@ -1333,101 +1333,35 @@ static int dp_pm_runtime_resume(struct device *dev)
>>>>           return 0;
>>>>    }
>>>>
>>>> -static int dp_pm_resume(struct device *dev)
>>>> +static void dp_pm_complete(struct device *dev)
>>>>    {
>>>> -       struct platform_device *pdev = to_platform_device(dev);
>>>> -       struct msm_dp *dp_display = platform_get_drvdata(pdev);
>>>> -       struct dp_display_private *dp;
>>>> -       int sink_count = 0;
>>>> -
>>>> -       dp = container_of(dp_display, struct dp_display_private, dp_display);
>>>> +       struct dp_display_private *dp = dev_get_dp_display_private(dev);
>>>>
>>>>           mutex_lock(&dp->event_mutex);
>>>>
>>>>           drm_dbg_dp(dp->drm_dev,
>>>> -               "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
>>>> +               "type=%d core_inited=%d phy_inited=%d power_on=%d\n",
>>>>                   dp->dp_display.connector_type, dp->core_initialized,
>>>> -               dp->phy_initialized, dp_display->power_on);
>>>> +               dp->phy_initialized, dp->dp_display.power_on);
>>>>
>>>>           /* start from disconnected state */
>>>>           dp->hpd_state = ST_DISCONNECTED;
>>>>
>>>> -       /* turn on dp ctrl/phy */
>>>> -       dp_display_host_init(dp);
>>>> -
>>>> -       if (dp_display->is_edp)
>>>> -               dp_catalog_ctrl_hpd_enable(dp->catalog);
>>>> -
>>>> -       if (dp_catalog_link_is_connected(dp->catalog)) {
>>>> -               /*
>>>> -                * set sink to normal operation mode -- D0
>>>> -                * before dpcd read
>>>> -                */
>>>> -               dp_display_host_phy_init(dp);
>>>> -               dp_link_psm_config(dp->link, &dp->panel->link_info, false);
>>>> -               sink_count = drm_dp_read_sink_count(dp->aux);
>>>> -               if (sink_count < 0)
>>>> -                       sink_count = 0;
>>>> -
>>>> -               dp_display_host_phy_exit(dp);
>>>> -       }
>>>> -
>>>> -       dp->link->sink_count = sink_count;
>>>> -       /*
>>>> -        * can not declared display is connected unless
>>>> -        * HDMI cable is plugged in and sink_count of
>>>> -        * dongle become 1
>>>> -        * also only signal audio when disconnected
>>>> -        */
>>>> -       if (dp->link->sink_count) {
>>>> -               dp->dp_display.link_ready = true;
>>>> -       } else {
>>>> -               dp->dp_display.link_ready = false;
>>>> -               dp_display_handle_plugged_change(dp_display, false);
>>>> -       }
>>>> -
>>>> -       drm_dbg_dp(dp->drm_dev,
>>>> -               "After, type=%d sink=%d conn=%d core_init=%d phy_init=%d power=%d\n",
>>>> -               dp->dp_display.connector_type, dp->link->sink_count,
>>>> -               dp->dp_display.link_ready, dp->core_initialized,
>>>> -               dp->phy_initialized, dp_display->power_on);
>>>> -
>>>>           mutex_unlock(&dp->event_mutex);
>>>> -
>>>> -       return 0;
>>>>    }
>>>>
>>>> -static int dp_pm_suspend(struct device *dev)
>>>> +static int dp_pm_prepare(struct device *dev)
>>>>    {
>>>> -       struct platform_device *pdev = to_platform_device(dev);
>>>> -       struct msm_dp *dp_display = platform_get_drvdata(pdev);
>>>> -       struct dp_display_private *dp;
>>>> -
>>>> -       dp = container_of(dp_display, struct dp_display_private, dp_display);
>>>> +       struct dp_display_private *dp = dev_get_dp_display_private(dev);
>>>>
>>>>           mutex_lock(&dp->event_mutex);
>>>>
>>>> -       drm_dbg_dp(dp->drm_dev,
>>>> -               "Before, type=%d core_inited=%d  phy_inited=%d power_on=%d\n",
>>>> -               dp->dp_display.connector_type, dp->core_initialized,
>>>> -               dp->phy_initialized, dp_display->power_on);
>>>> -
>>>>           /* mainlink enabled */
>>>>           if (dp_power_clk_status(dp->power, DP_CTRL_PM))
>>>>                   dp_ctrl_off_link_stream(dp->ctrl);
>>>>
>>>> -       dp_display_host_phy_exit(dp);
>>>> -
>>>> -       /* host_init will be called at pm_resume */
>>>> -       dp_display_host_deinit(dp);
>>>> -
>>>>           dp->hpd_state = ST_SUSPENDED;
>>>>
>>>> -       drm_dbg_dp(dp->drm_dev,
>>>> -               "After, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
>>>> -               dp->dp_display.connector_type, dp->core_initialized,
>>>> -               dp->phy_initialized, dp_display->power_on);
>>>> -
>>>>           mutex_unlock(&dp->event_mutex);
>>>>
>>>>           return 0;
>>>> @@ -1435,8 +1369,10 @@ static int dp_pm_suspend(struct device *dev)
>>>>
>>>>    static const struct dev_pm_ops dp_pm_ops = {
>>>>           SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
>>>> -       .suspend = dp_pm_suspend,
>>>> -       .resume =  dp_pm_resume,
>>>> +       SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>>>> +                                pm_runtime_force_resume)
>>>> +       .prepare = dp_pm_prepare,
>>>> +       .complete = dp_pm_complete,
>>>>    };
>>>>
>>>>    static struct platform_driver dp_display_driver = {
>>>> @@ -1670,9 +1606,6 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
>>>>
>>>>           dp_display = container_of(dp, struct dp_display_private, dp_display);
>>>>
>>>> -       if (dp->is_edp)
>>>> -               dp_hpd_unplug_handle(dp_display, 0);
>>>> -
>>>>           mutex_lock(&dp_display->event_mutex);
>>>>
>>>>           state = dp_display->hpd_state;
>>>> --
>>>> 2.7.4
>>>>
>
>