mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>,
	Anthony Yznaga <anthony.yznaga@oracle.com>,
	sparclinux@vger.kernel.org, davem@davemloft.net,
	andreas@gaisler.com
Cc: linux-kernel@vger.kernel.org, agordeev@linux.ibm.com,
	will@kernel.org, ryan.roberts@arm.com, osalvador@suse.de,
	Meelis Roos <mroos@linux.ee>,
	Rick Edgecombe <rick.p.edgecombe@intel.com>
Subject: Re: Found it - was: Re: [PATCH] sparc64: fix hugetlb for sun4u
Date: Thu, 21 Aug 2025 14:52:06 +0200	[thread overview]
Message-ID: <cd3c4a6a-abc5-4f4f-b829-72f86cfb5bde@redhat.com> (raw)
In-Reply-To: <c50091bdbb0556ee74ec501381f1efc14a4e5929.camel@physik.fu-berlin.de>

>>
>> @Anthony: Can you see any suspicious in the disassembled code that Meelis (CC'ed) posted?
> 
> OK, bisecting has lead me to the following commit:

CCing Rick.

Hm, but that's bpf-only code. Are you sure that it's this exact commit 
or rather ....

> 
> d53d2f78ceadba081fc7785570798c3c8d50a718 is the first bad commit
> commit d53d2f78ceadba081fc7785570798c3c8d50a718 (HEAD)
> Author: Rick Edgecombe <rick.p.edgecombe@intel.com>
> Date:   Thu Apr 25 17:11:38 2019 -0700
> 
>      bpf: Use vmalloc special flag
>      
>      Use new flag VM_FLUSH_RESET_PERMS for handling freeing of special
>      permissioned memory in vmalloc and remove places where memory was set RW
>      before freeing which is no longer needed. Don't track if the memory is RO
>      anymore because it is now tracked in vmalloc.
>      
>      Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
>      Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
>      Cc: <akpm@linux-foundation.org>
>      Cc: <ard.biesheuvel@linaro.org>
>      Cc: <deneen.t.dock@intel.com>
>      Cc: <kernel-hardening@lists.openwall.com>
>      Cc: <kristen@linux.intel.com>
>      Cc: <linux_dti@icloud.com>
>      Cc: <will.deacon@arm.com>
>      Cc: Alexei Starovoitov <ast@kernel.org>
>      Cc: Andy Lutomirski <luto@kernel.org>
>      Cc: Borislav Petkov <bp@alien8.de>
>      Cc: Daniel Borkmann <daniel@iogearbox.net>
>      Cc: Dave Hansen <dave.hansen@linux.intel.com>
>      Cc: H. Peter Anvin <hpa@zytor.com>
>      Cc: Linus Torvalds <torvalds@linux-foundation.org>
>      Cc: Nadav Amit <nadav.amit@gmail.com>
>      Cc: Rik van Riel <riel@surriel.com>
>      Cc: Thomas Gleixner <tglx@linutronix.de>
>      Link: https://lkml.kernel.org/r/20190426001143.4983-19-namit@vmware.com
>      Signed-off-by: Ingo Molnar <mingo@kernel.org>
> 
>   include/linux/filter.h | 17 +++--------------
>   kernel/bpf/core.c      |  1 -
>   2 files changed, 3 insertions(+), 15 deletions(-)
> 
> I assume it's also related to this change:

... this one?

> 
> commit 868b104d7379e28013e9d48bdd2db25e0bdcf751
> Author: Rick Edgecombe <rick.p.edgecombe@intel.com>
> Date:   Thu Apr 25 17:11:36 2019 -0700
> 
>      mm/vmalloc: Add flag for freeing of special permsissions
>      
>      Add a new flag VM_FLUSH_RESET_PERMS, for enabling vfree operations to
>      immediately clear executable TLB entries before freeing pages, and handle
>      resetting permissions on the directmap. This flag is useful for any kind
>      of memory with elevated permissions, or where there can be related
>      permissions changes on the directmap. Today this is RO+X and RO memory.
>      
>      Although this enables directly vfreeing non-writeable memory now,
>      non-writable memory cannot be freed in an interrupt because the allocation
>      itself is used as a node on deferred free list. So when RO memory needs to
>      be freed in an interrupt the code doing the vfree needs to have its own
>      work queue, as was the case before the deferred vfree list was added to
>      vmalloc.
>      
>      For architectures with set_direct_map_ implementations this whole operation
>      can be done with one TLB flush when centralized like this. For others with
>      directmap permissions, currently only arm64, a backup method using
>      set_memory functions is used to reset the directmap. When arm64 adds
>      set_direct_map_ functions, this backup can be removed.
>      
>      When the TLB is flushed to both remove TLB entries for the vmalloc range
>      mapping and the direct map permissions, the lazy purge operation could be
>      done to try to save a TLB flush later. However today vm_unmap_aliases
>      could flush a TLB range that does not include the directmap. So a helper
>      is added with extra parameters that can allow both the vmalloc address and
>      the direct mapping to be flushed during this operation. The behavior of the
>      normal vm_unmap_aliases function is unchanged.
>      
>      Suggested-by: Dave Hansen <dave.hansen@intel.com>
>      Suggested-by: Andy Lutomirski <luto@kernel.org>
>      Suggested-by: Will Deacon <will.deacon@arm.com>
>      Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
>      Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
>      Cc: <akpm@linux-foundation.org>
>      Cc: <ard.biesheuvel@linaro.org>
>      Cc: <deneen.t.dock@intel.com>
>      Cc: <kernel-hardening@lists.openwall.com>
>      Cc: <kristen@linux.intel.com>
>      Cc: <linux_dti@icloud.com>
>      Cc: Borislav Petkov <bp@alien8.de>
>      Cc: H. Peter Anvin <hpa@zytor.com>
>      Cc: Linus Torvalds <torvalds@linux-foundation.org>
>      Cc: Nadav Amit <nadav.amit@gmail.com>
>      Cc: Rik van Riel <riel@surriel.com>
>      Cc: Thomas Gleixner <tglx@linutronix.de>
>      Link: https://lkml.kernel.org/r/20190426001143.4983-17-namit@vmware.com
>      Signed-off-by: Ingo Molnar <mingo@kernel.org>
> 
> Adrian
> 


-- 
Cheers

David / dhildenb

  parent reply	other threads:[~2025-08-21 12:52 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-16  1:24 Anthony Yznaga
2025-07-16  6:18 ` John Paul Adrian Glaubitz
2025-07-16  8:41   ` John Paul Adrian Glaubitz
2025-07-16 16:47     ` Anthony Yznaga
2025-07-24 10:52     ` John Paul Adrian Glaubitz
2025-07-25  5:59 ` John Paul Adrian Glaubitz
2025-07-25 20:46 ` John Paul Adrian Glaubitz
2025-07-25 21:09   ` John Paul Adrian Glaubitz
2025-08-08 21:31 ` John Paul Adrian Glaubitz
2025-08-08 22:15   ` Anthony Yznaga
2025-08-08 22:37     ` John Paul Adrian Glaubitz
2025-08-09  6:23       ` John Paul Adrian Glaubitz
2025-08-09  6:26         ` John Paul Adrian Glaubitz
2025-08-09  6:42           ` John Paul Adrian Glaubitz
2025-08-10  9:52             ` John Paul Adrian Glaubitz
2025-08-10 22:20               ` John Paul Adrian Glaubitz
2025-08-11  8:25                 ` David Hildenbrand
2025-08-11 10:44                 ` John Paul Adrian Glaubitz
2025-08-11 11:06                   ` John Paul Adrian Glaubitz
2025-08-12 12:32                   ` Found it - was: " John Paul Adrian Glaubitz
2025-08-12 12:34                     ` John Paul Adrian Glaubitz
2025-08-21 12:52                     ` David Hildenbrand [this message]
2025-08-21 15:03                       ` Edgecombe, Rick P
2025-08-21 16:42                         ` John Paul Adrian Glaubitz
2025-08-11  8:20         ` David Hildenbrand
2025-08-11  8:28           ` John Paul Adrian Glaubitz
2025-09-19 18:01 ` Andreas Larsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cd3c4a6a-abc5-4f4f-b829-72f86cfb5bde@redhat.com \
    --to=david@redhat.com \
    --cc=agordeev@linux.ibm.com \
    --cc=andreas@gaisler.com \
    --cc=anthony.yznaga@oracle.com \
    --cc=davem@davemloft.net \
    --cc=glaubitz@physik.fu-berlin.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mroos@linux.ee \
    --cc=osalvador@suse.de \
    --cc=rick.p.edgecombe@intel.com \
    --cc=ryan.roberts@arm.com \
    --cc=sparclinux@vger.kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®