From: "Péter Ujfalusi" <peter.ujfalusi@gmail.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Francesco Dolcini <francesco@dolcini.it>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Aradhya Bhatia <a-bhatia1@ti.com>
Subject: Re: [PATCH 02/11] drm/bridge: tc358768: Fix bit updates
Date: Fri, 11 Aug 2023 19:23:48 +0300 [thread overview]
Message-ID: <cd5d39a2-4f4c-419a-8137-d2719135e205@gmail.com> (raw)
In-Reply-To: <20230804-tc358768-v1-2-1afd44b7826b@ideasonboard.com>
On 04/08/2023 13:44, Tomi Valkeinen wrote:
> The driver has a few places where it does:
>
> if (thing_is_enabled_in_config)
> update_thing_bit_in_hw()
>
> This means that if the thing is _not_ enabled, the bit never gets
> cleared. This affects the h/vsyncs and continuous DSI clock bits.
I guess the idea was to keep the reset value unless it needs to be flipped.
>
> Fix the driver to always update the bit.
>
> Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> ---
> drivers/gpu/drm/bridge/tc358768.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
> index bc97a837955b..b668f77673c3 100644
> --- a/drivers/gpu/drm/bridge/tc358768.c
> +++ b/drivers/gpu/drm/bridge/tc358768.c
> @@ -794,8 +794,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
> val |= BIT(i + 1);
> tc358768_write(priv, TC358768_HSTXVREGEN, val);
>
> - if (!(mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
> - tc358768_write(priv, TC358768_TXOPTIONCNTRL, 0x1);
> + tc358768_write(priv, TC358768_TXOPTIONCNTRL,
> + (mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0 : BIT(0));
>
> /* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
> val = tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk * 4);
> @@ -861,11 +861,12 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
> tc358768_write(priv, TC358768_DSI_HACT, hact);
>
> /* VSYNC polarity */
> - if (!(mode->flags & DRM_MODE_FLAG_NVSYNC))
> - tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5), BIT(5));
> + tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5),
> + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIT(5) : 0);
Was this the reverse before and should be:
(mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : BIT(5)
> +
> /* HSYNC polarity */
> - if (mode->flags & DRM_MODE_FLAG_PHSYNC)
> - tc358768_update_bits(priv, TC358768_PP_MISC, BIT(0), BIT(0));
> + tc358768_update_bits(priv, TC358768_PP_MISC, BIT(0),
> + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIT(0) : 0);
>
> /* Start DSI Tx */
> tc358768_write(priv, TC358768_DSI_START, 0x1);
>
--
Péter
next prev parent reply other threads:[~2023-08-11 16:21 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-04 10:44 [PATCH 00/11] drm/bridge: tc358768: Fixes and timings improvements Tomi Valkeinen
2023-08-04 10:44 ` [PATCH 01/11] drm/bridge: tc358768: Fix use of uninitialized variable Tomi Valkeinen
2023-08-11 16:19 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 02/11] drm/bridge: tc358768: Fix bit updates Tomi Valkeinen
2023-08-11 16:23 ` Péter Ujfalusi [this message]
2023-08-11 17:02 ` Tomi Valkeinen
2023-08-13 0:23 ` Maxim Schwalm
2023-08-14 6:34 ` Tomi Valkeinen
2023-08-15 17:21 ` Maxim Schwalm
2023-08-16 8:14 ` Tomi Valkeinen
2023-08-16 8:21 ` Tomi Valkeinen
2023-08-04 10:44 ` [PATCH 03/11] drm/bridge: tc358768: Cleanup PLL calculations Tomi Valkeinen
2023-08-11 16:25 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 04/11] drm/bridge: tc358768: Use struct videomode Tomi Valkeinen
2023-08-11 16:26 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 05/11] drm/bridge: tc358768: Print logical values, not raw register values Tomi Valkeinen
2023-08-11 16:31 ` Péter Ujfalusi
2023-08-11 17:05 ` Tomi Valkeinen
2023-08-04 10:44 ` [PATCH 06/11] drm/bridge: tc358768: Use dev for dbg prints, not priv->dev Tomi Valkeinen
2023-08-11 16:32 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 07/11] drm/bridge: tc358768: Rename dsibclk to hsbyteclk Tomi Valkeinen
2023-08-11 16:33 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 08/11] drm/bridge: tc358768: Clean up clock period code Tomi Valkeinen
2023-08-11 16:34 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 09/11] drm/bridge: tc358768: Fix tc358768_ns_to_cnt() Tomi Valkeinen
2023-08-11 16:35 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 10/11] drm/bridge: tc358768: Attempt to fix DSI horizontal timings Tomi Valkeinen
2023-08-11 16:39 ` Péter Ujfalusi
2023-08-04 10:44 ` [PATCH 11/11] drm/bridge: tc358768: Add DRM_BRIDGE_ATTACH_NO_CONNECTOR support Tomi Valkeinen
2023-08-11 16:44 ` Péter Ujfalusi
2023-08-11 16:58 ` Tomi Valkeinen
2023-08-13 17:11 ` Maxim Schwalm
2023-08-14 7:31 ` Tomi Valkeinen
2023-08-14 10:04 ` Tomi Valkeinen
2023-08-14 10:10 ` Sam Ravnborg
2023-08-14 10:17 ` Laurent Pinchart
2023-08-14 13:29 ` Tomi Valkeinen
2023-08-15 17:44 ` Maxim Schwalm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cd5d39a2-4f4c-419a-8137-d2719135e205@gmail.com \
--to=peter.ujfalusi@gmail.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a-bhatia1@ti.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=francesco@dolcini.it \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome