From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753435AbeBLSaM (ORCPT ); Mon, 12 Feb 2018 13:30:12 -0500 Received: from galahad.ideasonboard.com ([185.26.127.97]:51863 "EHLO galahad.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751295AbeBLSaK (ORCPT ); Mon, 12 Feb 2018 13:30:10 -0500 Subject: Re: [PATCH v2 3/5] [RFT] ARM: dts: wheat: Fix ADV7513 address usage To: Lars-Peter Clausen , linux-media@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org Cc: Mark Rutland , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , Sergei Shtylyov , Kieran Bingham , Magnus Damm , Kieran Bingham , Rob Herring , Russell King , Simon Horman , Jean-Michel Hautbois , "moderated list:ARM PORT" References: <1518459117-16733-1-git-send-email-kbingham@kernel.org> <1518459117-16733-4-git-send-email-kbingham@kernel.org> From: Kieran Bingham Organization: Ideas on Board Message-ID: Date: Mon, 12 Feb 2018 18:30:06 +0000 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.5.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Language: en-GB Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Lars, Thanks for your review! On 12/02/18 18:24, Lars-Peter Clausen wrote: > On 02/12/2018 07:11 PM, Kieran Bingham wrote: > [...] >> + /* >> + * The adv75xx resets its addresses to defaults during low power power >> + * mode. Because we have two ADV7513 devices on the same bus, we must >> + * change both of them away from the defaults so that they do not >> + * conflict. >> + */ >> hdmi@3d { >> compatible = "adi,adv7513"; >> - reg = <0x3d>; >> + reg = <0x3d 0x2d 0x4d, 0x5d>; > > To have the correct semantics this should be: > reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;> > It is a set of 4 single cell addresses. The other thing is a single 4 cell > address. It will get compiled to the same bytes, but the DT tools should > complain about it, because it doesn't match #address-cells. Not to mention the spurious comma's!!! (at least I marked the patch RFT :D) I'll resend a v2.1 RFT here, and update my local changes (with the same fault, sans comma) to my other DT files! Thanks for the fast review. -- Kieran > >> + reg-names = "main", "cec", "edid", "packet"; >> >> adi,input-depth = <8>; >> adi,input-colorspace = "rgb"; >> @@ -272,7 +279,8 @@ >> >> hdmi@39 { >> compatible = "adi,adv7513"; >> - reg = <0x39>; >> + reg = <0x39 0x29 0x49, 0x59>; > > Same here. > >> + reg-names = "main", "cec", "edid", "packet"; >> >> adi,input-depth = <8>; >> adi,input-colorspace = "rgb"; >> >