mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kuppuswamy Sathyanarayanan  <sathyanarayanan.kuppuswamy@linux.intel.com>
To: andy@infradead.org, qipeng.zha@intel.com, dvhart@infradead.org,
	linux@roeck-us.net
Cc: wim@iguana.be, sathyaosid@gmail.com, david.e.box@linux.intel.com,
	rajneesh.bhardwaj@intel.com,
	sathyanarayanan.kuppuswamy@linux.intel.com,
	platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org
Subject: [PATCH v7 3/6] watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions
Date: Sun,  9 Apr 2017 15:00:18 -0700	[thread overview]
Message-ID: <ce8f66b252cbf7a3eef43c7ff3be1c21fb1f2393.1491773609.git.sathyanarayanan.kuppuswamy@linux.intel.com> (raw)
In-Reply-To: <aefdf4f6a7b0cf4af92d51ce2b9b73284cc03ffe.1491773609.git.sathyanarayanan.kuppuswamy@linux.intel.com>

iTCO_wdt no_reboot_bit set/unset functions has lot of common code between
them. So merging these two functions into a single update function would
remove these unnecessary code duplications. This patch fixes this issue
by creating a no_reboot_bit update function to handle both set/unset
functions.

Also checking for iTCO version every time you make no_reboot_bit set/unset
call is inefficient and makes the code look complex. This can be improved
by performing this check once during device probe and selecting the
appropriate no_reboot_bit update function. This patch fixes this issue
by splitting the update function into multiple helper functions.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/watchdog/iTCO_wdt.c | 83 +++++++++++++++++++++++++++------------------
 1 file changed, 50 insertions(+), 33 deletions(-)

Changes since v6:
 * make iTCO_wdt_no_reboot_bit_setup() static
 * remove inline specifier for update_no_reboot_bit helper functions.

Changes since v5:
 * Changed update function argument name from "status" to "set".
 * Fixed commit history.
 * Changed update function name to use "bit" instead of "flag"
 * Addressed Andy's comment on creating multiple helper functions.

diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 3d0abc0..a629933 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -106,6 +106,8 @@ struct iTCO_wdt_private {
 	struct pci_dev *pci_dev;
 	/* whether or not the watchdog has been suspended */
 	bool suspended;
+	/* no reboot update function pointer */
+	int (*update_no_reboot_bit)(void *p, bool set);
 };
 
 /* module parameters */
@@ -170,48 +172,61 @@ static inline u32 no_reboot_bit(struct iTCO_wdt_private *p)
 	return enable_bit;
 }
 
-static void iTCO_wdt_set_NO_REBOOT_bit(struct iTCO_wdt_private *p)
+static int update_no_reboot_bit_def(void *priv, bool set)
 {
-	u32 val32;
-
-	/* Set the NO_REBOOT bit: this disables reboots */
-	if (p->iTCO_version >= 2) {
-		val32 = readl(p->gcs_pmc);
-		val32 |= no_reboot_bit(p);
-		writel(val32, p->gcs_pmc);
-	} else if (p->iTCO_version == 1) {
-		pci_read_config_dword(p->pci_dev, 0xd4, &val32);
-		val32 |= no_reboot_bit(p);
-		pci_write_config_dword(p->pci_dev, 0xd4, val32);
-	}
+	return 0;
 }
 
-static int iTCO_wdt_unset_NO_REBOOT_bit(struct iTCO_wdt_private *p)
+static int update_no_reboot_bit_pci(void *priv, bool set)
 {
-	u32 enable_bit = no_reboot_bit(p);
-	u32 val32 = 0;
+	struct iTCO_wdt_private *p = priv;
+	u32 val32 = 0, newval32 = 0;
 
-	/* Unset the NO_REBOOT bit: this enables reboots */
-	if (p->iTCO_version >= 2) {
-		val32 = readl(p->gcs_pmc);
-		val32 &= ~enable_bit;
-		writel(val32, p->gcs_pmc);
+	pci_read_config_dword(p->pci_dev, 0xd4, &val32);
+	if (set)
+		val32 |= no_reboot_bit(p);
+	else
+		val32 &= ~no_reboot_bit(p);
+	pci_write_config_dword(p->pci_dev, 0xd4, val32);
+	pci_read_config_dword(p->pci_dev, 0xd4, &newval32);
 
-		val32 = readl(p->gcs_pmc);
-	} else if (p->iTCO_version == 1) {
-		pci_read_config_dword(p->pci_dev, 0xd4, &val32);
-		val32 &= ~enable_bit;
-		pci_write_config_dword(p->pci_dev, 0xd4, val32);
+	/* make sure the update is successful */
+	if (val32 != newval32)
+		return -EIO;
 
-		pci_read_config_dword(p->pci_dev, 0xd4, &val32);
-	}
+	return 0;
+}
+
+static int update_no_reboot_bit_mem(void *priv, bool set)
+{
+	struct iTCO_wdt_private *p = priv;
+	u32 val32 = 0, newval32 = 0;
+
+	val32 = readl(p->gcs_pmc);
+	if (set)
+		val32 |= no_reboot_bit(p);
+	else
+		val32 &= ~no_reboot_bit(p);
+	writel(val32, p->gcs_pmc);
+	newval32 = readl(p->gcs_pmc);
 
-	if (val32 & enable_bit)
+	/* make sure the update is successful */
+	if (val32 != newval32)
 		return -EIO;
 
 	return 0;
 }
 
+static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p)
+{
+	if (p->iTCO_version >= 2)
+		p->update_no_reboot_bit = update_no_reboot_bit_mem;
+	else if (p->iTCO_version == 1)
+		p->update_no_reboot_bit = update_no_reboot_bit_pci;
+	else
+		p->update_no_reboot_bit = update_no_reboot_bit_def;
+}
+
 static int iTCO_wdt_start(struct watchdog_device *wd_dev)
 {
 	struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
@@ -222,7 +237,7 @@ static int iTCO_wdt_start(struct watchdog_device *wd_dev)
 	iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout);
 
 	/* disable chipset's NO_REBOOT bit */
-	if (iTCO_wdt_unset_NO_REBOOT_bit(p)) {
+	if (p->update_no_reboot_bit(p, false)) {
 		spin_unlock(&p->io_lock);
 		pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
 		return -EIO;
@@ -263,7 +278,7 @@ static int iTCO_wdt_stop(struct watchdog_device *wd_dev)
 	val = inw(TCO1_CNT(p));
 
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
-	iTCO_wdt_set_NO_REBOOT_bit(p);
+	p->update_no_reboot_bit(p, true);
 
 	spin_unlock(&p->io_lock);
 
@@ -428,6 +443,8 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	p->iTCO_version = pdata->version;
 	p->pci_dev = to_pci_dev(dev->parent);
 
+	iTCO_wdt_no_reboot_bit_setup(p);
+
 	/*
 	 * Get the Memory-Mapped GCS or PMC register, we need it for the
 	 * NO_REBOOT flag (TCO v2 and v3).
@@ -442,14 +459,14 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	}
 
 	/* Check chipset's NO_REBOOT bit */
-	if (iTCO_wdt_unset_NO_REBOOT_bit(p) &&
+	if (p->update_no_reboot_bit(p, false) &&
 	    iTCO_vendor_check_noreboot_on()) {
 		pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
 		return -ENODEV;	/* Cannot reset NO_REBOOT bit */
 	}
 
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
-	iTCO_wdt_set_NO_REBOOT_bit(p);
+	p->update_no_reboot_bit(p, true);
 
 	/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
 	if (!devm_request_region(dev, p->smi_res->start,
-- 
2.7.4

  parent reply	other threads:[~2017-04-09 22:04 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-09 22:00 [PATCH v7 1/6] platform/x86: intel_pmc_ipc: fix gcr offset Kuppuswamy Sathyanarayanan
2017-04-09 22:00 ` [PATCH v7 2/6] platform/x86: intel_pmc_ipc: Add pmc gcr read/write/update api's Kuppuswamy Sathyanarayanan
2017-04-09 22:00 ` Kuppuswamy Sathyanarayanan [this message]
2017-04-10 12:51   ` [PATCH v7 3/6] watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions Guenter Roeck
2017-04-10 12:51   ` Guenter Roeck
2017-04-09 22:00 ` [PATCH v7 4/6] watchdog: iTCO_wdt: Add PMC specific noreboot update api Kuppuswamy Sathyanarayanan
2017-04-09 22:00 ` [PATCH v7 5/6] platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure Kuppuswamy Sathyanarayanan
2017-04-09 22:00 ` [PATCH v7 6/6] platform/x86: intel_pmc_ipc: use gcr mem base for S0ix counter read Kuppuswamy Sathyanarayanan
2017-04-25 13:29 ` [PATCH v7 1/6] platform/x86: intel_pmc_ipc: fix gcr offset Andy Shevchenko
2017-04-25 17:34   ` sathyanarayanan kuppuswamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ce8f66b252cbf7a3eef43c7ff3be1c21fb1f2393.1491773609.git.sathyanarayanan.kuppuswamy@linux.intel.com \
    --to=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=andy@infradead.org \
    --cc=david.e.box@linux.intel.com \
    --cc=dvhart@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=qipeng.zha@intel.com \
    --cc=rajneesh.bhardwaj@intel.com \
    --cc=sathyaosid@gmail.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®